SP Wilmad-LabGlass, Flasks
-
ProCulture® Magnetically Driven Cap Assembly Only
SP Wilmad-LabGlass70, 100 and 120 mm caps are manufactured from glass filled PBT 70, 100 and 120 mm caps supplied with red rubber liner and Ultem impeller retaining nut Shur-Lok® 140 mm cap design has an unique compression O-ring design to insure tight internal seal of the flask and is supplied with Ultem…
-
ProCulture® Shaker Flasks with Beaded Neck and Standard Baffles
SP Wilmad-LabGlassBeaded rim ensures a greater resistance to chipping Three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
ProCulture® Fernbach Shaker Flasks with Beaded Rim
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio Beaded rim ensures a greater resistance to chipping Available without baffles or with three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic…
-
Round Bottom Four-Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have four vertical necks - one center neck and three side necks which are 90° apart. All necks have Standard Taper outer joints.
-
3 Neck Flat Flange Reaction Vessel Cover
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has a flat flange. For use with large capacity cylindrical reaction vessels, 2000mL, 3000mL and 4000mL (LG-8082, LG-8084, LG-8085, and LG-8089). Flange…
-
Filter Flask with Stopper Joint
SP Wilmad-LabGlassThis borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.
-
Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…
-
Bidwell-Sterling Moisture Traps with Vapor Connection
SP Wilmad-LabGlassFor the determination of water in petroleum and bituminous materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal…
-
Conical Flange Vessel Clamp
SP Wilmad-LabGlassThis clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…
-
Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads…
-
Class A Volumetric Serialized Flasks with Stopper
SP Wilmad-LabGlassGlass quality, calibration lines, inscription and appearance are maintained according to the former NBS circular 602. Flask has a marking spot in addition to a serial number. Calibrated to contain (TC) at 20°C. Supplied with stopper.
-
VirTis® Style Extra Wide Freeze Drying Flasks
SP Wilmad-LabGlassMade of borosilicate glass, these freeze drying flasks are used with VirTis® lyophilizing equipment. Openings are extra-wide for efficient shell freezing and suited for bulky samples. Wall thickness of flask is designed for vacuum applications. These flasks are supplied with a nylon translucent…
-
4 Neck Reaction Vessel Covers
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints that are 120° apart, these borosilicate glass reaction vessel lids have a conical flange. Bottom flange ID is 4" and ground for a leak-proof fit with a reaction flask. For use with reaction vessels…
-
ProCulture® Fernbach Shaker Flasks with GL45 Screw Thread
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio With three standard baffle indents to improve agitation during shaking Supplied with GL45 closure Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
Cylindrical Reaction Vessels with O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.
-
4 Neck Molded Reaction Vessel Covers
SP Wilmad-LabGlassThese borosilicate glass 4-neck reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with…
-
Class A Saybolt Viscosity Volumetric Flask
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, this heavy walled borosilicate glass viscosity flask has a top with reinforced lip and is used in determining Saybolt viscosity of petroleum and bituminous materials. This receiving flask can be used in Saybolt viscometer baths. Conforms to ASTM D…
-
Class A Volumetric Flasks with Plastic Stopper
SP Wilmad-LabGlassThese borosilicate glass volumetric flasks are provided with a plastic closed-bottom stopper which fits the Standard Taper ground zone. Stopper design prevents the neck from breaking if flask is tipped over. Calibrated "to contain" (TC) at 20°C.
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
Stainless Steel McCarter Reaction Clamps
SP Wilmad-LabGlassUsed to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…
-
Jacketed Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…
-
Calibration/Measuring Flask Set Supplements, TC Metric System
SP Wilmad-LabGlassThese borosilicate glass graduated neck flasks come in sizes to supplement our official metric series, LG-4317. Additional sizes can be supplied on request. Calibrated "to contain" at 68°F/20°C.
-
Laboratory Grade Cylindrical Dewar Flasks
SP Wilmad-LabGlassFor routine use. Furnished silvered, evacuated and with aluminum base. Not for transportation of Liquid Nitrogen. Properties Capacity mL: 1000 Inside Diameter Inches: 2-11/16 Inside Depth Inches: 11-7/8
-
Suprasil Offset Nitrogen Dewar Flask for Bruker
SP Wilmad-LabGlassThese Dewar Flasks provide a convenient alternative to VT systems for studies at 77 K, and are silvered around the reservoir. 150mL flask lasts 60 minutes after a filling Offset reservoir is designed for cavities that have limited space between the reservoir and the drive shaft for the iris
-
4 Neck Flat Flange Reaction Vessel Cover
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a flat flange. Use LG-7316 clamps. NOTE: LG-8087 is designed to be used with LG-8080, LG-8084, LG-8085, and LG-8089 cylindrical reaction vessels.
-
Round Bottom Three Vertical Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have three vertical necks with Standard Taper outer joints. The side necks are 180° apart.
-
Class A Volumetric Flasks
SP Wilmad-LabGlassThese borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289.…
-
4 Neck O-Ring Flange Reaction Vessel Covers for Size 359 O-Rings
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…
-
Class A Volumetric Flasks, Heavy Duty, Wide Mouth, Glass Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…
-
Class A Volumetric Serialized Cylindrical Flasks with Stopper
SP Wilmad-LabGlassFeaturing a wide base for greater stability, these borosilicate glass flasks have a serial number and a marking area. Its design addresses the needs of smaller volume vessels. All sizes are made to meet the requirements of ASTM E 237. Calibrated "to contain" (TC) at 20°C and supplied…
-
Class A Kohlrausch Volumetric Flasks
SP Wilmad-LabGlassCalibrated "to contain" at 20°C, the upper neck of these borosilicate glass flasks are enlarged to permit easy introduction of solids. Each flask is provided with a marking spot in addition to a serial number. NOTE: Supplied with Certificate of Compliance
-
Cylindrical Jacketed/Indented Reaction Vessels, O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.