SP Bel-Art, Bottles
-
Spinplus® Magnetic Stirring Bars
SP Bel-ArtSpinplus® magnetic stirring bars add speed and efficiency to mixing operations. The "+" shape creates a deep vortex and provides stable, quiet operation Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert …
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Scienceware® Economy Dippers
SP Bel-ArtFor convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …
-
Add the convenience of adjustable spray to your Scienceware® wash bottles. Trigger sprayers with adapters fit any Scienceware® bottle with an easy to fill, 53mm wide closure and offer convenient, adjustable spray dispensing of a wide range of chemicals including bleach, ethanol, machine oil…
-
Plain Spinbar Magnetic Stirring Bars
SP Bel-ArtSmooth surface stirbars have no sharp or flat edges which maximizes contact with the stirring vessel. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008, as verified by SGS…
-
Spinstar® Magnetic Stirring Bars
SP Bel-ArtSpinstar® magnetic stirring bars create a deep mixing vortex at relatively slow speeds. Star shape is designed to fit the inside diameter of most commonly-used beakers Perfect for applications requiring slow, thorough mixing Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
No-Wire Test Tube Grip Racks
SP Bel-ArtTest Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. • Fingers allow simultaneous decanting to save valuable…
-
Rotary Pipette Stand
SP Bel-ArtTurn to the Pipette You Want This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7-1/8") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered…
-
Scienceware® Rigid Scrapers
SP Bel-Art0210P67: Resharpeneable Rigid Scraper Made from glass-reinforced polyimide nylon, this rigid scrapers straight, chisel-type edge may be resharpened. FDA grade materials are suitable for direct contact with foods, drugs, and cosmetics 14cm (5-1/2") long x 6.3cm (2.5") wide…
-
Scienceware® Stirring Bar Garage
SP Bel-ArtA variety of magnetic stirring bars from 159mm (6") to 10mm (0.5") bars are supported on the Garage. Wires on the upper half of the rack are arranged close together and designed to capture smaller magnetic stir bars; larger bars are captured on more widely spaced wires in the lower half…
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
Scienceware® Churn Sample Splitters
SP Bel-ArtMix and Divide a Water Sample into Subsamples for Testing Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one…
-
Poxygrid® 60 & 150-Place Test Tube Racks
SP Bel-ArtChemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F);…
-
Magnetic Stirring Bar External Retriever
SP Bel-ArtThe retriever is placed against the vessel wall where the stirbar is located. Slide the retriever up along the vessel wall, and the stirring bar follows along the inside wall of the vessel up to a point where you can manually pick it up. The oblong section 25x70mm (1" x 2-3/4") houses the…
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Polypropylene Policeman
SP Bel-ArtThis policeman is made of a 4.7mm (3/16") diameter polypropylene rod with one end flattened and cut diagonally. Scrape, spread and transfer materials without scratching Wide flattened end is ideal for larger work areas; 1.3cm (0.5") wide Length: 20.3cm (8") Inert,…
-
Spinfin® Magnetic Stirring Bars
SP Bel-ArtSpinfin® magnetic stirring bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Maintains its position in a vessel and will not wobble Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE…
-
Scienceware® Water Bath Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions 213mm x 110mm (8-3/8" x 4-5/16"). Durable polypropylene rack that sinks to the bottom of a water bath and remains upright when agitated. Height: 111mm (4-3/8"). Height top deck: 57mm (2-1/4"). Places: 72. Rows: 6 x 12. Tube size: 10-13mm.
-
Scienceware® Mini Sampler Spoons
SP Bel-ArtThese small sampling spoons are ideal for retrieving small, specific volume samples of powders or similar materials. Use a separate spoon for each material sampled to avoid cross contamination Made from white high-impact polystyrene plastic Available in 5 sizes
-
Microcentrifuge Tube Rack
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions: 210mm x 70mm x 35mm H (8 ¼" x 2 ¾" x 1 3/8"). Two-level polypropylene rack organized and stores twenty 1.5ml tubes in numbered wells. Tubes protrude 25mm (1") for easy removal.
-
Right-to-Know safety-labeled wash bottles are pre-printed with the full color NFPA diamond and other important safety information providing compliance with OSHA requirements. Unique, patented 2-piece valve prevents pressure build-up of solvents and eliminates dangerous drips. Valve also allows…
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Scienceware® Pipette Pump III
SP Bel-ArtSuperior design for better pipette visibility and more precise dispensing User-friendly shape for maximum comfort Lightweight for easy, one-handed use Compact design is ideal for working in hoods or glove boxes Ergonomically designed for comfort and simplicity, the Pipette Pump III has a…
-
Spinbar® Capsule Magnetic Stirring Bars
SP Bel-ArtThe Capsule Magnetic Stirring Bar is a polystyrene capsule containing a 30 x 8mm (1.18 x 0.31") polygon magnetic stirring bar that spins freely inside the capsule while being prevented from spinning off center and ‘wandering’ on the base of a vessel. Containment of the…
-
Triangular Scraper
SP Bel-ArtNo Metal, No Scratching, No Bending This plastic scraper has a rigid, chisel-edged, triangular blade that is tapered and fans out to a width of 11.1cm (4-3/8"). Handle is shaped for a comfortable and secure grip Made from white polypropylene that complies with FDA requirements…
-
Designed for stirring large volumes in vessels such as drums and tanks. A molded pivot ring minimizes the contact area between the bar and the vessel, thus reducing friction and chattering. Marring of plastic containers is diminished Multifaceted surface adds turbulence relative to…
-
Stainless Steel Lab Spoon and Spatula
SP Bel-ArtExtra Length for Sampling from Larger Bottles This large stainless steel lab spoon is 30.5cm (12”) long for reaching into larger bottles. Flat spatula end measures 3.1cm (1-1/4") wide Spoon end is 3.7cm (1-1/2") wide and holds 5mL Connecting bar is 14mm…
-
In-Line Test Tube Rack
SP Bel-ArtFor high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly