Allows collection from different angles, including 90° Samples liquids, powder or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing…

Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling.  

The job of collecting water samples is easier with the Whirl-Pak® Stand-Up Thio-Bag®! A special gusset on the bottom of the bag flattens out when water is put in the bag, allowing it to stand up completely by itself. No rack or other holder is needed to keep the bag upright. Forget washing and…

For Homogenizer Blenders Specially designed for use with homogenizer blenders Whirl-Pak® sample bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene with a strong perimeter seal. New size 1303N29 features a filter layer to separate the…

Stand-Up Sample Bags The Whirl-Pak® Stand-Up Bag makes sample handling and testing much easier because it gives users the ability to perform important laboratory functions with both hands, because the bag will stand completely by itself. No rack or other holder is needed to keep the bag…

The Sludge Judge® II is made from a 1-1/4" (3.18 cm) outside diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. Designed for sampling 5% or less solids. It holds 6 oz. per foot (178 ml per .31 m) and can be assembled according to the requirements…

Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F (82° C). Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after…

Durable high-density polyurethane sponge is packed in sealed 18 oz write-on Whirl-Pak® bag and hydrated with 16mL of HiCap™ Neutralizing Broth. Box contains five foil pouches with 20 sponges each for a total of 100 units. Bags are 9"L x 4"W (23 x 11.5 cm) with a thickness…

Convenient For food-borne pathogen testing A low cost, effective and convenient absorbent sponge designed for environmental surface sampling of work areas, equipment and any other places where testing for Listeria, Salmonella and other food-borne pathogens is required. Sponge is free of…

For transporting Whirl-Pak® bags in upright position Plastic coated Double grid design Racks have a second grid 1” below the top to keep bags upright.

When it is necessary to protect a sample from light, the Whirl-Pak® black bag is specially designed for this application. The polyethylene film is made from pigmented resins so the black color is an integral part of the bag and not a printed layer. The result is an opaque bag providing maximum…

Are the people transporting specimens in your facility fully protected? Be sure with Nasco’s Trans-Pak™ Biohazard Bag! The Trans-Pak™ has a special added feature: a unique outside pouch to separate important paperwork from the inside of the bag and the specimen - eliminating…

Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples…

The Nasco Sludge Nabber makes sample collection of liquids fast and easy. It has an adjustable aluminum pole that extends from 4 to 6-1/2 feet (1.22 to 1.99 m), making it easy to reach the liquid to be sampled and carried. The Sludge Nabber is ideally suited for numerous sampling requirements…

These bags feature a special round bottom seal designed to minimize sample fragments from getting caught in the corners of the bag during blending. This bag is specially designed for use with homogenizer blenders. It is made from extra-heavy polyethylene and has special features to make sample…

Whirl-Pak® Filter Bag Without Closure

For fast, convenient sampling of a variety of materials, the Whirl-Pak® Scoop Bag will save time and money. The sterile scoop is already contained inside the bag, eliminating the need to carry two items to collect the sample and minimizing contamination. The 2-oz. (60 cc) polypropylene scoop…

Pre-moistened Sterile glove option available Sterile sponge is pre-moistened with neutralizing buffer and is ready to use. Sponge measures 1 1/2” x 3” x 5/8” (3.8 x 7.6 x 1.5 cm) thick and is used to collect bacteria samples from a work surface, equipment, animal…

Multipurpose effervescent tablets. Sanitizes, disinfects, and protects against odor. Kills 99.999% of bacteria in 60 seconds. Effective against Pseudomonas aeruginosa, Staphylococcus aureus, Salmonella enterica, and Salmonella typhi. For use in sanitation and disinfection in milk processing…

The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of…

When the sample does not have to be retained, these bags are designed for quick testing and disposal. The bags are made of Whirl-Pak® film, have a perimeter seal, and are sealed at the top. There is a perforation for easy opening and to protect sterility, which allows for separate handling of each bag.

55 oz. (1,627 ml) capacity 4.0 mil (.102 mm) thick 7-1/2" W x 12" L (19 x 30 cm) The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish…

The Sludge Judge® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic…

For environmental surface sampling Options save time and money The general-purpose buffer has a pH of 7.2 ± .2 and optimizes the stability of growth of most organisms. With or without sterile glove.

7 oz./207 ml capacity 3-3/4” W x 7” L (9.5 cm x 18 cm) 3.0 mil, .076mm thick Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180°…

Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling. 6 oz. bag has 4 oz. fill line.…

Ideal for collecting environmental surface sampling without touching the sponge. Polypropylene handle allows maximum contact of the sponge with the sampling surface and helps with the collection of hard-to-reach surfaces, around corners and irregular shaped areas. The PolyProbe™ is…

Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer…

Lacquered, turned wood handle, 5-1/2" long. Fits all standard laboratory scoops.