MycoZap Mycoplasma Elimination Reagent removes detectable mycoplasma contamination in as little as four days and has been optimized to clear Mycoplasma with minimal toxic effects to the contaminated cells. The reagent employs a combination of antibiotic and antimetabolic agents and offers reliable…

For measuring all sorts of glow luminescence. Provides results for MycoAlert TM Mycoplasma Detection Assays immediately. The Lucetta TM 2 Luminometer is a single tube luminometer developed for the detection of bioluminescence and chemiluminescence. It can be used as a portable…

AccuGENE™ Molecular Biology Buffers are ready-to-use solutions ideal for a wide range of molecular biology applications. Each reagent is prepared with 18 megOhm water, filtered using a 0.2 micron filter, and filled into sterile bottles.

IsoGel™ Precast Agarose IEF Plates provide rapid and reproducible isoelectric focusing of proteins up to 2,000 kDa. These plates are specifically designed for the analysis of antibodies. Each precast gel is supported on GelBond® Film to provide easy handling and excellent dimensional…

AccuGENE™ Water is considered a “fit for purpose” Type I water and is created for use specifically in molecular biology applications.

Detect mycoplasma contamination in cell culture supernatants, media, and supplements with the next generation MycoAlert™ Kit allowing the use of less sensitive plate luminometers or multifunctional readers. The MycoAlert™ PLUS Mycoplasma Detection Kit is a selective biochemical…

FlashGelTM DNA Cassettes are essential components of the FlashGelTM System for fast electrophoresis of DNA. FlashGelTM DNA Cassettes are the ideal sample screening tool for checking up to 32 PCR or restriction fragment samples quickly without having to plan your day around agarose gels or to verify…

FlashGel TM Recovery Buffer is optimized for direct DNA recovery using FlashGel TM Recovery Cassettes. This eliminates agarose gel preparation, band excision and purification. The FlashGel TM Recovery System delivers highly efficient recovery, free from inhibitors and UV-induced damage, in a…

The ToxiLight™ BioAssay Kit is a bioluminescent, non-destructive cytolysis assay kit designed to measure the release of the enzyme, adenylate kinase (AK), from damaged cells. AK is a robust protein present in all eukaryotic cells, which is released into the culture medium when cells die. The…

The FlashGel TM Device Pack provides the key components for researchers to quickly begin using and imaging FlashGel TM DNA Cassettes. FlashGel TM DNA Cassettes are the ideal sample screening tools to check up to 32 PCR or restriction fragments quickly without having to plan your day around…

FlashGel™ Bluelight Dock

FlashGel TM Loading Dye (5X) is sample buffer optimized for preparation of DNA and native RNA samples used with the FlashGel TM System.  FlashGel TM Loading Dye (5X) is provided in a 5X concentration. Simply prepare and load samples, watch bands migrate and get data in as little as 2…

SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from…

SeaKem® GTGTM Agarose is a standard gelling temperature, high gel strength agarose that resolves DNA fragments greater than 1,000 bp. This Genetic Technology GradeTM (GTGTM) agarose is specifically designed for preparative DNA electrophoresis and is tested for the presence of proteases, ligases…

SYPRO® Ruby Protein Gel Stain is highly sensitive, simple to use fluorescent stain that can accurately quantitate protein expression levels, and is compatible with standard fluorescent visualization systems and downstream identification techniques such as mass spectrometry.

NuSieve TM 3:1 Agarose is a molecular biology grade, standard melting temperature agarose that yields strong gels for fine resolution of small DNA, RNA, and PCR products ≤ 1 kb. NuSieve TM 3:1 Agarose is designed for analytical electrophoresis rather than in gel reactions or downstream…

GelBond Film® is a transparent, flexible polyester film designed to support agarose gels. Gels cast on GelBond® Film remain permanently attached to the film through electrophoresis or immunodiffusion and all subsequent fixing, staining, destaining, and drying procedures. GelBond® Film…

The FlashGel TM System for fast electrophoresis of DNA is the ideal sample screening tool. Check up to 32 PCR or restriction fragments quickly without having to plan your day around agarose gels or verify your DNA sample integrity prior to downstream analysis. The FlashGel TM System is the…

AccuGENE™ Molecular Biology Buffers are ready-to-use solutions ideal for a wide range of molecular biology applications. Each reagent is prepared with 18 megOhm water, filtered using a 0.2 micron filter, and filled into sterile bottles.

AccuGENE™ TBE (Tris hydroxymethyl aminomethane) is made from Tris, EDTA and Boric acid. The addition of borate makes TBA a better conductive medium than TAE so it less prone to overheating and better for longer runs. Borate does inhibit some enzymatic reactions, so it is not often used if the…

The FlashGel™ System (Cat. No. 57067) contains a FlashGel™ Dock, a FlashGel™ Camera, a pack of 1.2% FlashGel™ DNA Cassettes, Loading dye and Marker.

GelStar™ Nucleic Acid Gel Stain is a highly sensitive fluorescent stain for detecting both DNA and RNA. You can choose to either add GelStar™ Stain to your agarose solution prior to casting or to post stain your gels. GelStar™ Nucleic Acid Gel Stain exhibits exceptional…

AccuGENE™ Sodium dodecyl sulfate is a detergent that is known to denature proteins; It’s used in polyacrylamide gel electrophoresis for the determination of protein molecular weight. It is also used in nucleic acid extraction procedures for the disruption of cell walls and dissociation…

FlashGel TM Visualization Glasses enable viewing of DNA bands to be recovered using the FlashGel TM Recovery System. The FlashGel TM Visualization Glasses enable direct viewing of DNA as it is being recovered. Using the FlashGel TM System users simply load samples, watch bands migrate and get…

SYBR® Green stains are fluorescent dyes used to detect DNA and RNA. They are more sensitive and less mutagenic than standard stains, yet they provide excellent signal-to-noise ratio with minimal background. SYBR® Green I detects as little as 60 pg dsDNA and 1 ng oligonucleotides in agarose…

Lonza’s Standard DNA Ladders are ready-to-dilute prior to loading on your gel. Plasmid-free to ensure minimal background. For all of Lonza’s Ladders, each band has an ideal 50% G-C content for rapid, precise sizing and sharp resolution. Our ladders are free from contaminating plasmid…

Formaldehyde denaturation is suitable when samples are to be recovered from agarose gels. Our Formaldehyde Sample Buffer contains formaldehyde, formamide, and tracking dyes in MOPS Buffer. Supplied in 1.0 ml vials

AccuGENE TM 10x PBS (Phosphate buffered saline) is a buffer solution commonly used in biological research. It is a water-based salt solution containing disodium hydrogen phosphate and sodium chloride. The osmolarity and ion concentrations of PBS are isotonic, so it is often used for protein and…

AccuGENE™Tris CL or Trishydroxymethyl aminomethane is a buffer with a range (7-9) that coincides with the physiological pH typical of most living organisms. It is the “T” in TAE, TBE and TE Buffers, and one of the most common starting chemicals when creating a biological buffer.…

AccuGENE™ Tris Glycine Native Buffer is a Tris buffer with added glycine. It is commonly used in electrophoresis of proteins in their “Native” , non-denatured state thus preserving the molecules' higher-order structure. When SDS is added, it denatures the proteins allowing…

Positive control for MycoAlert ® PLUS Mycoplasma Detection Kit and MycoAlert ® Mycoplasma Detection Kit

GelBond® PAG Film is a transparent, flexible polyester film designed to support polyacrylamide or MDE™ Gels. The acrylamide monomers covalently attach to the coating on the film during the polymerization reaction. Gels remain permanently attached to the film through electrophoresis…