Rapid test procedures and laminated color charts give low/medium/high concentrations for nitrogen, phosphorus and potassium (15 tests each) A pH indicator and color chart cover the range pH 4.0-9.0 (30 tests). A garden guide manual and soil handbook interpret test results and give lime and…

Direct Reading Titrator For determining QAC (quaternary ammonium compounds) in cooling waters and sanitizing solutions Range of 0 to 500 ppm QAC in 10 ppm increments Sufficient for 50 tests at 500 ppm 

Formula: Mixture Synonym(s): Chloride C

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features …

No color matching, no look up charts, no guessing! The unique, multi-test ColorQ pool and spa hand-held photometer reads SEVEN test factors (Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric Acid) directly on a digital display. Featuring an innovative…

This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education

This is the refill for LaMotte Mixed Acid Reagent used in the nitrite test kit.

Wide Range Octet Comparator Method Employ Octet Comparator having eight color standards in increments of 5.0 or 1.0 pH unit, as indicated in listings below Kits are offered covering ranges from pH 3.0-10.0 to pH 8.5-12.0 For each pH range, two kits are offered: one without and one…

The special rugged POOL MGR. kit series is for the public pool operator. The precise Octa-Slide 2 comparator system is used to comply with regulatory standards. The POOL MGR. series includes diagrammed instructions, saturation index calculator, water quality handbook, and the reliable Octa-Slide 2…

Measures multiple parameters Stores up to 25 data sets Waterproof to IP67 The PockeTester pH/Conductivity tracer measures five parameters including conductivity, TDS, salinity, pH and temperature using one electrode. Units of measure are pH, µS, mS, ppm, ppt, mg/L, g/L,…

Formula: AgNO₃

Octet Comparator Method For determining hexavalent, trivalent, and total chromium Octet comparator has color standards representing 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2 and 1.5 ppm Cr Sufficient for 20 tests Test requires suitable hot plate, not included Reagent Refill only. …

Works with the garden guide kit and the soil nutrients-phosphorus lab, this phosphorus indicator reagent with 15 ml volume is used for soil testing.

Tests for 5 soil nutrition factors: soil pH (pH 3.8 to 8.8) nitrate nitrogen (10 to 150 lbs/acre), phosphorus (10 to 200 lbs/acre), potassium (100 to 400 lbs/acre) and humus (low-to-high) Includes reagents for these five tests as well as three 250-mL bottles of Universal Extracting solution,…

The Model SD Monitoring Kit was specifically designed and manufactured to meet US EPA requirements for field test procedures approved in the Federal Register (Volume 55, No. 217), to monitor illicit storm drain connections. Each unit includes tests for pH, Total Chlorine, Total Copper, Phenols,…

Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl₂ in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

Octet Comparator For determining sulfate in natural waters and waste waters Employs modified APHA turbidimetric method with barium chloride Has color standards representing 20, 40, 60, 80, 100, 120, 160, and 200 ppm sulfate, sufficient for 50 tests

The LaMotte acid zirconyl SPADNS reagent is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

Drop Count Method For determining sulfite in water Employs modified APHA Method 428 One drop equals 5 ppm SO₃ Sufficient for 50 tests at 100 ppm

Water Sampling Outfit, LaMotte 3103 For collecting water samples to be tested for dissolved oxygen content Clear acrylic sampling chamber takes 60 mL sample collecting bottle Includes sampling chamber, 9866A35 Calibrated Line and nine USP Type 1 glass sample bottles with…

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

Test tap water from any source and study the impact of urban water on the city’s environment. "Wet in the City," a hands-on kit, introduces the basic concepts of water chemistry–even to kids as young as third grade! Non-hazardous TesTabs® make "Wet in the City" an…

The LaMotte 7 Inch stirring rod is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of sturdy plastic material which ensures durability and long lasting usage.

Applications: Food and Beverage, Environmental Education, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…

The LaMotte DPD chlorine secondary standard kit is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

Replacement cyanuric acid test strip tablets. Used for Cyanuric Acid instrument grade test with Lamotte Kits.

Direct Reading Titrator, Syringe Type For use in LaMotte field titration kits as well as in standard laboratory procedures such as dilutions and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL   All-purpose…

Octet Comparator Public health outfit for determining free and total chlorine, monochloramine, dichloramine, chlorine demand, bromine, iodine and pH of water Employs DPD tablet method Low range DPD chlorine Octet Comparator has color standards representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and…

7625 CAS Dropper Pipet Sufficient for 50 tests at 20 ppm 1 drop = 1.25 ppm HEDP 1 drop = 1.4 ppm PBTC Chromazurol S method may be used for Dequest, Bayhibit, Belcor 575 and Belsperse 161 phosphonates. Indicator changes from yellow to pink at the pH ideal for the reaction, then…

Tests 0-5 ppm Five intervals: 0, 0.5, 1, 3 and 5 50 strips per vial Unique range and sensitivity covers critical chlorine concentrations for many applications of food processing, water/wastewater treatment, education and other areas.

Formula: (NH₄)₂•HPO₄ Formula Weight: 132.06 CAS Number: 7783-28-0