Hamilton
-
Luer Lock Needles
HamiltonThe Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs…
-
Gastight Syringes For HP 7683/7673 GC Autosamplers…
-
Syringe Cartridge
HamiltonThe Hamilton syringe cartridge can be used with 1.0 umole PRP-1 syringe or vacuum manifold for loading, washing and eluting your samples. It offers bed volume of 600 mg. Application: For 1.0 µmole PRP-1 Syringe
-
Luer Lock Fitting
HamiltonThe Hamilton male luer lock fitting with 1/4 Inch - 28 threads is suitable for use with luer lock conversion kit.
-
Luer Lock Needles
HamiltonThe Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs…
-
Shimadzu AOC-9 Syringes
HamiltonHamilton offers a wide variety of syringes specifically designed for Shimadzu autosamplers that require 43 mm needle lengths as well as standard 51 mm lengths.
-
Syringes
HamiltonThe Hamilton 1700 series 250 uL syringe features ChemSeal© termination. This syringe model offers borosilicate glass and PTFE fluid path. It can be used at a pressure rating of up to 500 psig and temperature rating of up to 10 to 115 degree C.
-
OPTO Switch Assembly
HamiltonThe Hamilton opto switch assembly is suitable for use with ML900 valve assembly.
-
Syringe 7002Khch 2.0ul (25/2.75"/3)
HamiltonAutoclavable No Volume 2 µL Syringe Type Microliter Syringe Series 7000 Termination Knurled Hub (KH) Needle KH Gauge 25 gauge Point Style 3 Needle Length 2.75 inch (69.9 mm) Needle…
-
SpinTrode pH Electrodes
HamiltonThis combination pH electrode is especially made for measurements in very small volumes, such as NMR tubes, where a long thin shaft is needed and by requiring an immersion depth of only 7 mm! Benefits The very long (180 mm) and only 3 mm shaft diameter below make this pH electrode ideal…
-
High Temperature Septa
HamiltonHigh Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm…
-
Syringe 1025Tll 25ml w / o Flange
HamiltonMid-volume GASTIGHT syringe ideal for dispensing volumes from 100 μL up to 100 mL. Gas Tight Size: 25mL Type: Reagent PTFE Luer-Lock PTFE-Tipped Plungers Use with Hamilton MicroLab and Digital Diluters and Dispensers.
-
-
Luer Lock Needles
HamiltonThe Small Hub Removable Needle (RN) is compatible with RN syringes from 2.5 µL to 100 µL. Needles are available from 34 to 18 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to be specified prior to…
-
Micro Inactive Valve
HamiltonThe Hamilton 0.059 Inch micro inactive valve can be threaded with fittings, tubing assemblies and adapters.
-
Luer Lock Needles
HamiltonThe Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are…
-
Guard Cartridge Kit
HamiltonGuard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…
-
Guard Colum Starter Kit
HamiltonGuard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…
-
Replacement Cartridge
HamiltonGuard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…
-
HPLC Column
HamiltonThe PRP-h5 derives its hydrophobic functionality from a pentafluorinated polymer bead, delivering a selectivity difference from standard silica C18 stationary phases. This gives chromatographers the desired retention characteristics necessary for certain sample types. This difference is especially…
-
HPLC Column
HamiltonSilica packing material for a variety of reversed-phase separations Hamilton HxSil C8 columns are well end-capped for retention time reproducibility and durability. The C8 demonstrates excellent selectivity needed for complex sample mixtures and gives shorter retention times than a C18.
-
-
-
PICO 2 - board
HamiltonThe Hamilton PICO 2 - board is suitable for use with 5 - 100 uL SofTouch single/multi-channel pipette models.
-
700 Series Microliter Syringes
HamiltonThe 700 series syringe is the original hand-fitted Hamilton syringe. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance less than three thousandths of a millimeter, resulting in unsurpassed syringe life. This series of syringes is ideal for dispensing volumes from…
-
HPLC Column
HamiltonHamilton PRP-3 columns are based off of the PRP-1 with a larger pore size for protein separation. This column resin has no silanol groups, so irreversible protein adsorption is not a concern, giving analytes such as proteins a recovery of > 90%. This stable material also allows the use of…
-
Bottom Plate Assembly
HamiltonThe Hamilton bottom plate is suitable for use with 1000 uL/5000 uL SofTouch single channel pipette models and 0.2 - 10 uL, 100 uL/250 uL, 50 - 1200 uL SofTouch multi-channel pipette models.
-
Instrument Syringe
HamiltonThe Hamilton 1000 series 5 mL gastight instrument syringe with saltline plunger style features PTFE luer lock (TLL) termination. It is suitable for use with metal (N) or kel-F needles. This syringe model offers borosilicate glass, PTFE and UHMWPE fluid path. It can be used at a pressure rating of…
-
Luer Lock Adapter
HamiltonThe Hamilton luer lock adapter with male luer connections at both the ends, is suitable for use with many kinds of male and female luer and threaded connections. It is made from CTFE material which is durable and chemical resistant.
-
Removable needles Length: 1.71” HP point style See 8928C19 series for replacement needle kits.
-