These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.

These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

This line of centrifuge tubes has been designed specifically for urinalysis procedures. The tubes offer a flared-opening which is designed to make pouring off easy.  Dimensions: 21 x 105mm Polystyrene (PS) Spin Rate: 1500 RCF 

Globe Scientific offers high quality scintillation vials in three sizes to satisfy a range of applications. They are designed to provide consistently low background counts and are suitable for low activity counting. The smaller sizes are very economical to use since they require smaller quantities…

Transport tubes and vials are designed for the safe storage and transport of biological materials. The transparent polypropylene (PP) vials allow unobstructed viewing of the sample. The vials are shatter-proof and may be exposed to freezing temperatures. They feature leak-resistant screw caps that…

Sterile 16 x 101mm polypropylene (PP) transport tube with separate high-density polyethylene (HDPE) red screw cap. These leak-resistant tubes are tested to 70 Kpa and gamma sterilized. The self-standing tubes feature rounded bottoms with skirt. Working volume 10mL to 13mL Brim capacity 15mL …

Globe Scientific is pleased to offer these premium quality borosilicate glass tubes. The tubes provide excellent chemical resistance and durability. They feature well-rounded bottoms and smooth, fire-polished rims. Dimensional specifications are rigidly controlled for reliable, uniform results. The…

Globe's plastic culture tubes are produced in polystyrene (PS) or polypropylen (PP). The dual position snap cap (LDPE) provides either aerobic or anaerobic storage of samples. Note: Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for…

These multipurpose screw cap test tubes are offered in convenient sizes to suit a variety of applications. The screw caps are designed to be leak-tight allowing the tubes to be used for storage or transport.

Globe Scientific's false bottom tubes are designed for use as a secondary tube for barcoding on automated analyzers. Popular analyzers include Hitachi®, Olympus®, Corning®, Ortho®, Kodak®, Beckman®, IA®, Tosoh®, Vitros® and more.

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000…

Globe Scientific offers an extensive line of mulit-use test tubes. They are molded from premium grade polystyrene for clarity or of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene…

Globe Scientific's polystyrene (PS) reaction tube is designed for use on the Sysmex® CA50, CA500, CA1000, CA1500 and CA5000 analyzers.

Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

These centrifuge tubes have been designed specifically for urinalysis procedures. They feature a flared opening which is designed to simplify pouring off. Tubes offer a maximum RCF of 1500 g.

This top quality line of centrifuge tubes feature flat-top, plug-seal leak resistant screw caps, a large white writing area and printed graduation marks. Cap is made from High Density Polyethylene (HDPE) Sterile tubes are Rnase/Dnase and Pyrogen free White graduations and writing area …

This top quality line of centrifuge tubes feature flat-top, plug-seal leak resistant screw caps, a large white writing area and printed graduation marks. Cap is made from High Density Polyethylene (HDPE) Sterile tubes are Rnase/Dnase and Pyrogen free White graduations and writing area …

These disposable screwcap microcentrifuge tubes are available sterile or non-sterile. The sterile tubes include a cap with a clear (natural) nitrile o-ring. All are DNase, RNase and Pyrogen free. These disposable screwcap microcentrifuge tubes are available sterile or non-sterile The sterile…

10mL centrifuge tube, polypropylene (PP) with screw cap and printed graduations Dimensions: 16 x 100mm Available in non-sterile and sterile packaging White graduation marks and writing area Non-sterile tube (#6292) has natural screw cap Sterile tube (#6293) has yellow screw cap Spin…

Globe Scientific offers an extensive line of multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene…

They are molded from premium grade polystyrene for clarity or polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable.…

These pierceable caps are great for recapping vacuum blood tubes and test tubes. They are produced from santoprene (a rubberized material) and can easily be pierced with a syringe.

This top quality line of centrifuge tubes feature flat-top, plug-seal leak resistant screw caps, a large white writing area and printed graduation marks. Sterile tubes are RNase free, DNase free and Pyrogen free. Polystyrene (PS) Cap is made from High Density Polyethylene (HDPE) …

Globe Scientific's cardboard storage boxes are designed for the compact storage of sample tubes, cryogenic vials and centrifuge tubes in a temperature range of -196° to +121°C. They have a liquid resistant coating and are designed for use in refrigerator and cryogenic freezer systems.

Globe’s clinical centrifuge tubes are molded from polypropylene (PP) and feature flat-top, leak resistant blue caps. The tubes are printed with black graduation marks and have a large white writing area. Sterile tubes have attached blue screwcap Black printed graduations White printed…

50mL centrifuge tube, polystyrene (PS) with red screwcap (HDPE) and printed graduations. Available in non-sterile and sterile packaging White graduation marks and writing area

Available in non-sterile and sterile packaging White graduation marks and writing area Acrylic is a stronger, scratch resistant material that offers equivalent chemical resistance to polystyrene, while providing exceptional clarity. Acrylic offers a greater spin rate which is 5,000 rpm…

They are molded from premium grade polystyrene for clarity or polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable.…

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000…

An efficient and economic alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce…

This top quality line of centrifuge tubes feature flat-top, plug-seal leak resistant screw caps, a large white writing area and printed graduation marks. Sterile tubes are RNase free, DNase free and Pyrogen free. Polystyrene (PS) Cap is made from High Density Polyethylene (HDPE) 15mL…