The series O Buchner funnel mantle provides gentle heat for solutions that must be filtered while warm.

Heating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…

Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…

This heating mantle can heat metal beakers safely and efficiently. Inner glass-fabric ayers prevent contact of heating elements and vessel walls. The mantle is designed for straight-walled, flat bottom vessels.

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

The series STM mantles perform the same function as series TM heating mantles, plus operations requiring more heat. With an upper internal operating temperature of 650 deg C, these mantles resist burnout. STM1400 and STM1500 have 3 in legs for cool lab benches, are sealed, and have inert gas purge fittings.

Medium Duty, Model HST10 Totally enclosed, 1/17 hp, permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

The Flexible homogenizer drive allows up-and-down motion of rotating pestle in a stationary tube that can be mounted in ice or controlled-temperature bath. Application: Accepts the Adjustable Chucks Furnished with the Motor Drives as Well as the L11 Quick-Change Chuck and the L14 and L15 Flex-Grip Chucks

Heating mantles are preferred over Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series STM mantle for applications needing more heat. Aluminum Housed Mantles Feature: …

This timed control turns the output load on and off and then repeats the cycle. Each position on the knob from LO to HI represents a specific cycle time where the on time ranges from 6 to 100 percent. For example the LO setting represents a total cycle of approximately 60 seconds with an on time of…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

This mantle can accomodate and efficiently heat all types of straight walled metal beakers by preventing contact of heating elements and vessel walls with inner layers of glass fabric. Also available for glass beakers with resilient and pliable interior glass fabric which cradles fragile beakers.…

Stirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

These funnel mantles allow extraction of fluids while hot, preventing solidification of viscous material in cold stopcocks. The thickness of the fiberglass fabric between heating elements and soft glass wall of the separatory funnel prevents thermal strain and the resultant cracking. Viewing is…

VentSep, a special 1000 mL separatory funnel with a built-in relief valve, can be used on Glas-Col's Bench-top Shaker or either of the Glas-Col 3D shakers. These separatory funnels feature a built-in relief valve Funnels have a fluoropolymer resin stopcock, and a screw cap with…

This mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The tops are designed for use with Series M, TM, or STM mantles. They protect the flask, the solutions, and the laboratory from drafts, which would disturb the reflux ration…

The series STM mantles perform the same function as series TM heating mantles, plus operations requiring more heat. With an upper internal operating temperature of 650 deg C, these mantles resist burnout. STM1400 and STM1500 have 3 in legs for cool lab benches, are sealed, and have inert gas purge fittings.

With a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

This funnel mantle reduces viscosity and prevents precipitation of solutions that must be kept warm during transfer.

The mantle is used extensively in analytical work and in purification of research products with only small samples available. In sizes for spherical flasks 5 to 35mL and pear-shaped flasks 5-250mL. Certification: All 115 volt units are CSA certified. Electrical: Separable 3-ft.,…

The series STM mantles perform the same function as series TM heating mantles, plus operations requiring more heat. With an upper internal operating temperature of 650 deg C, these mantles resist burnout. STM1400 and STM1500 have 3 in legs for cool lab benches, are sealed, and have inert gas purge fittings.

Each separatory funnel holder will hold one funnel, and you can use up to four holders, which mount to the platform without fasteners. While the rear support of the funnel holder remains stationary, the front part holding the funnel can be released and rotated 360°. This permits the funnel…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. This beaker mantle covers both the bottom and the side for improved safety and efficiency of straight…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

This timed control turns the output load on and off and then repeats the cycle. Each position on the knob from LO to HI represents a specific cycle time where the on time ranges from 6 to 100 percent. For example the LO setting represents a total cycle of approximately 60 seconds with an on time of…