Light Duty Scrubber w/ Polycarbonate Coating Typical Applcations: Ink, paste, epoxy removal from stencils and scrubbing bioreactors  

Self-wringing, sponge mop heads with galvanized bracket designed for light duty cleaning and the application of disinfectants. UltraMOP SW has been designed to clean and disinfect clean rooms and sterile manufacturing environments. It is a self-wringing mop head refill constructed of a super,…

The mop head is constructed of a snag-resistant, polyester fabric lamination that extends over the leading and trailing edges of the underlying foam sponge eliminating the need for separate polyester socks. This patent pending Bump-PROOF design improves cleanliness and durability. Foam mop refill…

PharmaMOP® is designed for cleanroom cleaning SOP's. The light weight, 360 degree rotating and locking mop head give operators excellent control cleaning floors, walls and ceilings. The ultra-light handle, wringer less bucket system and drip resistant mop heads allow operators to efficiently carry…

Polyester/Microfiber, ribbed fabric over 1/8" foam core with strips of the Sahara™ foam on the front and back end In order to control contamination risks, medical device facilities perform thorough and extensive cleaning SOP's on floors, walls, and ceilings. Despite these procedures medical…

UltraMOP™ III is constructed of snag-resistant fabrics laminated to a super, fine pore urethane foam to enhance application of disinfectant to clean room surfaces. The Bump-Proof Wrap-Around design ensures that the leading and trailing edges do not generate particles resulting from abrasion damage.…

Micro Fiber over Polyester fabric construction is ideal for use with aggressive solvents such as IPA, acetone, Kyzen, MEK and Ethyl/Ether. Super soft foam core enables the swabs to conform to articulated surfaces for good cleaning efficiency. Micro fiber fabric enables excellent removal of…

Sahara+ PharmaMOP® GO Mop Head Advantages Advanced Construction. An absorbent cleanroom foam core is ultrasonically welded between a layer of a non-linting hybrid microfiber and laminated with dual Sahara® Foam Scrubbing Strips for exceptional cleaning. Minimize Surface…

UltraMOP™ SW has been designed to clean and disinfect clean rooms and sterile manufacturing environments. It is a self-wringing mop head refill constructed of a super, fine-pore urethane foam mechanically affixed to either a stainless steel or galvanized runner and designed to enhance application…

UltraMOP™ IV Mop Heads are constructed of snag-resistant, polyester fabric laminated to a super, fine pore urethane foam to enhance application of disinfectant to clean room surfaces. The Bump-PROOF Wrap-Around design ensures that the leading and trailing edges do not generate particles resulting…

Current equipment cleaning procedures that involve cleaning hardened process by-product often lead to abrasion damage of critical process equipment or the use of hazardous chemicals. The Sahara sponge is designed to scrub hardened, dried process residues and stains from scratch sensitive equipment.…

PharmaMOP® is designed for cleanroom cleaning SOP's. The light weight, 360 degree rotating and locking mop head give operators excellent control cleaning floors, walls and ceilings. The ultra-light handle, wringer less bucket system and drip resistant mop heads allow operators to efficiently carry…

Current equipment cleaning procedures that involve cleaning hardened process by-product often lead to abrasion damage of critical process equipment or the use of hazardous chemicals. The Sahara sponge is designed to scrub hardened, dried process residues and stains from scratch sensitive equipment.…

PharmaMOP® is designed for cleanroom cleaning SOP's. The light weight, 360 degree rotating and locking mop head give operators excellent control cleaning floors, walls and ceilings. The ultra-light handle, wringer less bucket system and drip resistant mop heads allow operators to efficiently carry…

UltraMOP™ SW has been designed to clean and disinfect clean rooms and sterile manufacturing environments. It is a self-wringing mop head refill constructed of a super, fine-pore urethane foam mechanically affixed to either a stainless steel or galvanized runner and designed to enhance application…

Current equipment cleaning procedures that involve cleaning hardened process by-product often lead to abrasion damage of critical process equipment or the use of hazardous chemicals. The Sahara sponge is designed to scrub hardened, dried process residues and stains from scratch sensitive equipment.…

UltraMOP™ cleanroom foam mop heads are designed for wet mopping procedures in sterile and controlled environments. Constructed of ester-based polyurethane for excellent application of disinfectants. The Bump-PROOF, patent-pending, fabric over foam versions allow for tear-free cleaning and…

Current equipment cleaning procedures that involve cleaning hardened process by-product often lead to abrasion damage of critical process equipment or the use of hazardous chemicals. The Sahara sponge is designed to scrub hardened, dried process residues and stains from scratch sensitive equipment.…

Current equipment cleaning procedures that involve cleaning hardened process by-product often lead to abrasion damage of critical process equipment or the use of hazardous chemicals. The Sahara sponge is designed to scrub hardened, dried process residues and stains from scratch sensitive equipment.…

ErgoSCRUB was designed to provide technician with a soft ergonomically correct scrubbing tool for Implant tools, ceramic domes, Novellus heater blocks, and large vacuum chambers. ErgoSCRUB is also available in firm models to allow for quick and easy scrubbing on flat surfaces. Easy to grip. …

PharmaMOP Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms..

UltraMOP™ SW is a clean room sponge mop head refill designed to fit on Roll-O-Matic® brand handles to be used for wet mopping procedures in sterile and controlled environments. UltraMOP™ SW constructed of a tear-resistant, highly absorbent polyurethane sponge and a stainless steel bracket. The…

Soft construction combined with easy gliding, superior scrub- bing performance. Effortlessly remove bleach and other disinfectant residues from scratch sensitive surfaces such as cleanroom windows and plastic curtains in ISO cleanrooms. Improves compliance with current cleaning and disinfection…

UltraMOP™ III is constructed of snag-resistant fabrics laminated to a super, fine pore urethane foam to enhance application of disinfectant to clean room surfaces. The Bump-Proof Wrap-Around design ensures that the leading and trailing edges do not generate particles resulting from abrasion damage.…

PharmaMOP™ Locking Head Frame with 5.25 ft. Telescoping Handle. Adjustable to 50", 57" and 64". The ultra-light weight reduces operator work loads on all surfaces. Use with 3' or 5' extensions for high access cleaning up to 23 ft. Total weight is 485 grams (1.06 lbs.) PharmaMOP is designed for…