Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for lyophilization…

Manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements.

Clear or amber Range of sizes Teflon-lined caps The organic series consists of clear and amber glass vials with solid or open top closures. The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone…

Coplin Staining Jar, 5-10 Slide Unit (8541L01) This unit holds ten 3" x 1" (75 mm x 25 mm) slides, back-to-back that extend above the opening so you can manipulate them without using forceps Polypropylene screw cap The screw cap is made of linerless white polypropylene to…

50-Hole Scintillation Vial Rack Accommodates fifty 20-mL scintillation vials up to 28 mm in diameter or fifty 40-mL EPA vials Durable polypropylene resists most organic reagents Autoclavable Underside of wells recessed for stability when stacked, and each well has opening in bottom to…

These standard round-bottom culture tubes are manufactured from 51 expansion borosilicate glass that conforms to ASTM Type I, Class B and USP Type I requirements. The tubes can be reused many times. The caps have a white 14B styrene-butadiene rubber liner or a PTFE faced 14B styrene-butadiene…

Ideal for use as sample bottles Also useful for dry powders, soil samples and specimen storage Graduated in mL and oz with screw caps

Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Amber glass for light sensitive samples Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and…

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

Clear, non-graduated glass vials with solid top black phenolic screw caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with…

Interchangeable hydrophobic membrane filter guarantees effective protection against airborne contamination during aspiration and dispensing.

Walls allow for complete removal of contents Ideal for soil sampling and environmental applications With attached screw caps 1701U01-1701U09: with white polypropylene cap/poly-vinyl liner 1701U11-1701U19: with white polypropylene cap/Teflon® faced foamed liner 1701U23-1701U31:…

Clear or amber with channeled glass stopper Clear glass bottles are of borosilicate glass; amber bottles are flint glass Available in 50 mL and 100 mL sizes Glass bottles with projecting lug on flat, channeled glass stopper deliver contents drop by drop.

This new generation of Socorex® Bottle Top Dispensers is intended for the safe and reproducible liquid distribution of volumes up to 25, 50 and 100 mL. The Calibrex™ 525 organo includes a ground glass plunger, best suited for organics, non-crystallizing acid and base solutions. The…

For biological sample preservation in glass Allows for storage at low temperatures Made from low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Can be used in the vapor phase of liquid nitrogen Special design allows for storage at…

Sleeve stoppers are plug stoppers with fold-over skirts Used on serum vials and other crimp-finish containers that do not require aluminum seals or overcaps Can be used as an injection site for multiple dose entry Manufactured from natural red rubber, a general-purpose rubber…

Tear-Off, Tear-Out, or Flip Cap

Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

With Cell Suspension Stirrer, Celstir® Entire flask assembly can be autoclaved Offered in six sizes, working capacities 25 to 1,000 mL Easy access through side arms Of Wheaton “200” borosilicate glass Cylindrical with screw neck and polypropylene cap …

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Clear glass for light sensitive sample Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage…

Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for…

Designed for the concentration of trace amounts of analyte in an organic solvent prior to analysis Smooth Clear-Seal joints eliminate the need for grease, reducing the possibility of contaminating the sample Complete unit consists of 270mm three-ball Snyder column, 500mL flask and 10mL…

Molded-in graduations Lightweight Strong Sterile Wheaton PET Square Media Bottles offer the clarity of glass, the strength of plastic and a space-saving design.  Bottles are tested for pH stability, temperature durability, cloning efficiency and cytotoxicity. No-drip…

Available with caps attached or no caps Low profile for greater stability Available with rubber lined caps or Teflon faced rubber lined caps Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely inert and…

Interchangeable hydrophobic membrane filter guarantees effective protection against airborne contamination during aspiration and dispensing.

Programmable variable speed peristaltic pump; 0.5 - 400 rpm Icon driven 5” interface For use with 2 – 8 mm ID tubing Dispense range 0.01 – 999.99mL Accommodates multiple pump heads System allows for speed ramping, flow mode and programmable drawback The…

Exceptional ergonomics Soft plunger activation Versatile feeding through bottle, tubing or syringe No need for consumables Swift-set in-lab calibration Autoclavable fully assembled at 121°C/250°F

Clear, non-graduated glass vials with crimp top finish Closures not included Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and open top screw cap or serum finish …

Wide mouth bottles Ideal for solids and viscous liquids Bottles are designed for easy cleaning in dishwasher or with a brush Specially designed rim prevents fluids from running down the outside of the bottle Wheaton 400 borosilicate glass Standard Taper stopper size indicated in listings.

Sample Vials in Lab File are packaged in corrugated trays with partitions. Clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements, and amber vials are manufactured from Wheaton 320 glass that conforms to USP…