Corning, Glass
-
PYREX Tall Weighing Bottles
CorningShort length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
Flask Only 250 ml
CorningThese PYREX(r) 250mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled
-
Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.
-
PYREX Bell Jars
CorningHigh form with knob and finely ground flange Corning 6885 Made from specially selected mold-blown blanks Bottom flange has a finely ground finish to assure tight sealing with ground glass plates Dimensions (ID x OD): 1577J18 Jar: 5 1/8” x 5 1/2”; 1577J33 Jar: 6 1/8” x 6…
-
PYREX® Kjeldahl Flasks
CorningRound bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.
-
These PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking…
-
Featuring PYREXplus® protective PVC safety coating May be autoclaved or microwaved to 121°C (250°F) Resistant to thermal shock Similar to 1744F31 series. Borosilicate glass safety bottles provide good optical clarity and are mechanically durable. Can be marked with either…
-
PYREX® Class A single metric scale graduated glass cylinders are calibrated "to deliver" in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Certificate of Identification and capacity, traceable to NIST standards. Permanent…
-
These PYREXPLUS® coated graduated cylinders feature a protective polymer coating for longer product life and safety. They are autoclavable at 121°C and resistant to thermal shock. The cylinder is calibrated "to deliver" (TD). Bumper guards not supplied. For replacement bumper…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Wide Mouth Milk Dilution Bottles
CorningSquare bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL
-
These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 60x15mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space th
-
PYREX Stark-Dean
CorningPYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123
-
Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…
-
PYREX Goetz Centrifuge Tubes
CorningWithout stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations: from 1 to 5 mL in 1 mL from 5 to 50 mL in 5 mL from 50 to 100 mL in 10 mL divisions
-
These 140mL PYREX® dishes have rugged beaded rims and are approximately 80x45mm (O.D.xHeight).
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…
-
Similar to 4997B13 series, but with protective PVC coating Coating promotes longer product life and greater safety and helps contain glass and contents should breakage occur Autoclavable and microwaveable to 121°C (250°F) Resistant to thermal shock With PYREX Standard Taper stopper
-
Heavy walls Graduated Replaceable tube These PYREX heavy wall flasks have a seated bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish…
-
These disposable 50mL Pyrex® glass centrifuge tubes are manufactured from Type I borosilicate glass and have a GPI 24-400 thread. They are supplied without caps. The tubes are designed to withstand centrifugation up to 3,000 RCF and are packed in convenie
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Class A PYREX graduated cylinders are calibrated “To Deliver” (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement bumper…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.
-
Roux Culture Bottle
CorningOffset neck is tool-finished for increased strength and uniform stopper fit; uses number 5 rubber stopper Useful for growing mass cultures and single or monolayer cultures Will withstand repeated sterilization (wet or dry) Capacity 1,000 mL Stacks for easy storage
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow No. 22 Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.
-
PYREX® Brand Funnels
CorningLong and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…