Corning, Supplies, Centrifuge
-
These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.
-
This 50mL PYREX® tube is for general hospital laboratory work. It was designed by Dr. F.N.L. Taylor, Boston City Hospital, for determinations involving multiple calibrations and for carrying out digestions. Graduated at 12.5, 25, 35 and 50mL, and supplied with a durable, white enamel marking spot.
-
Rated to 12,000 RCFPrinted graduations and writing area for sample identificationScrew caps can be closed with one hand. Sterile options are also available. RNase-/DNase-freeNonpyrogenic.
-
These 50mL PYREX® round bottom, nongraduated centrifuge tubes have a No. 13 Standard Taper solid glass pennyhead stopper. Rockefeller Institute of Medical Research type.
-
These 40mL heavy duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…
-
PYREX Goetz Centrifuge Tubes
CorningWithout stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations: from 1 to 5 mL in 1 mL from 5 to 50 mL in 5 mL from 50 to 100 mL in 10 mL divisions
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…
-
Corning® 50mL clear polypropylene (PP) preassembled closed systems self-standing centrifuge tubes come with the advanced polyethylene CentriStar™ caps. The CentriStar™ cap has an easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design…
-
These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…
-
Centrifuge Tube Oil, 100 ml
CorningThese 100mL PYREX® pear-shaped centrifuge tubes are used for determination of water and sediment in petroleum products. They are fabricated from mold-blown blanks to insure uniform shape and greater mechanical strength. The scale and figures are durable white enamel which stand out clearly against…
-
PYREX Micro Tubes (Corning 8061)
CorningGraduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm
-
Tube 10mL Self Stand Screw Cap
CorningSkirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…
-
PYREX® Oil Centrifuge Tubes
CorningPear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations: from 0 to 1/2 in 0.05 from 1/2 to 2 in 1/10 from 2 to 3 in 1/5 from 3 to 5 in 1/2 from 5 to 10 in 1 from 10 to…
-
These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…
-
Tube 40 ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these…
-
Tube, Cent, Conical, 40ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been nec
-
Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…
-
-
Tube 10 ml
CorningThese 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …
-
Tube 50 ml
CorningUniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of ac
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…
-
PYREX® Conical Centrifuge Tubes
CorningGraduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…
-
These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.
-
Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy. The durable, white enamel scale…