Corning, Supplies, 250 mL
-
PYREX Heavy Duty Beakers
CorningExtra-heavy walls and rim minimize breakage These heavy duty beakers are specifically designed to offer the best mechanical strength under harsh conditions, such as mechanized washing operations. For convenience, the 250 through 4000mL beakers have a double graduated metric scale to indicate…
-
Transluscent polypropylene graduated cylinders are manufactured with raised graduations at the primary scale points. Cylinders have a hexagonal base and are calibrated "to contain" (TC). Tolerances according to ISO 6706. Exposure to temperatures above 60°C may affect accuracy.
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.
-
Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings. Glass beads indicate full capacity line. Permanent white enamel…
-
Transluscent polypropylene beakers printed with blue graduations.
-
Suitable for shaker culture applications Optically clear polycarbonate Sterilized by gamma irradiation Certified nonpyrogenic Certified RNase- and DNase-free Corning Baffled Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps…
-
These PYREXPLUS® coated graduated cylinders feature a protective polymer coating for longer product life and safety. They are autoclavable at 121°C and resistant to thermal shock. The cylinder is calibrated "to deliver" (TD). Bumper guards not supplied. For replacement bumper…
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
Glass stopcock and glass stopper Stem length of 65 mm
-
PYREX Polyethylene Bumper Guard
CorningBumper guard is a polyethylene shock absorbing ring designed to reduce the breakage of cylinders. For best results, slide the ring toward the top to absorb shock should the cylinder be accidentally upset.
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
Chemical and thermal resistant Graduated Screw cap Bottles are made from PYREX® borosilicate glass for enhanced chemical and thermal resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and…
-
These PYREX® graduated cylinders are calibrated “to contain” (TC) and are equipped with a 24/40 Standard Taper outer joint. These cylinders are particularly useful as distilling receivers. Graduations are in durable white enamel. Supplied without stoppers. For hollow glass Standard…
-
These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…
-
PYREX Brand Hydrometer Cylinders
CorningBreakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
-
Funnel Only 250 ml For 64Oz
CorningThese replacement 250mL PYREX® Squibb separatory funnels do not have a Teflon® valve assembly or glass stopper. For replacement glass Standard Taper stoppers, see No. 7650; for replacement Teflon® stopcock assemblies, see No. 7681.
-
Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand hardware.
-
Polypropylene jars with snug-fitting, polyethylene caps Economical Certified non-pyrogenic Flexible container can be used as a beaker, specimen collection vessel or storage container. Calibrated in both millimeters and ounces. Jars and caps can be ordered separately.
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…