Corning, NEW! Life Science
-
PC-400D & PC-600D Hot Plates
CorningConserves energy Hot top indicator for safety Two-year warranty Corning® hot plates have a glass-ceramic Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Advanced insulation technology conserves energy by keeping heat safely at the top where…
-
These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…
-
PYREX Stark-Dean
CorningPYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123
-
Corning® Lambda™ EliteTouch™ pipettors have been engineered to provide the highest levels of ergonomics, accuracy, and precision. Lightweight construction, contoured shape of the handle, and 4-digit counter were designed to ensure comfortable pipetting. All pipettors feature smooth…
-
Column 190 mm 19/22
CorningThe PYREX® distilling condenser has 19/22 Standard Taper inner and outer joints, is simple in design and easy to use. Side tubulations are 10mm O.D. Distilling condensers are widely used in the lab, especially for fractionation. This condenser is also a replacement for organic chemistry kit No.…
-
Features Pyroceram ® top for uniform heating Superb linear control for both heating and stirring Reduced maintenance times and costs “Spill Trough” design channels spills away from electronics and controls. Support rod mount included for attachment of a standard…
-
This 1L PYREX® single piece continuous liquid/liquid extractor is for use with solvents of heavier specific gravity than sample liquid being extracted. It is designed to meet EPA test method requirements outlined by SW-846, RCRA, and CLP. The sidearm is sealed to the extractor body just below the…
-
PYREX Liebig Condensers
CorningWith Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.
-
PYREX® Liebig Condensers
CorningSuitable for the use in vacuum distillations With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has Standard Taper 19/38 joints; others have 24/40 joints
-
Scholar PC-170 Hot Plate
CorningHeat transfer up to 360 °C White enameled steel top plate Compact 5” x 5” size Dual heat shields for safety Economically priced Dual heat shields dissipate heat and keep the case cool to the touch. Control knob has off function, extra-large numbers and is infinitely adjustable…
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
LSE™ Compact Centrifuge
CorningThe Corning® LSE™ Compact Centrifuge is a space saving centrifuge ideal for use in Life Science and Industrial Research labs. Three angle rotors are available (sold separately) for use with the Corning LSE Compact Centrifuge, which can accommodate tube sizes of 15mL, 50mL, and 1.5/2.0mL…
-
Axygen® MultiRack Tip System
CorningFeatures: Reusable rack with reload systems Small footprint and stackable design for maximum bench space usage Extended tips offered in 10, 200, 300, and 1000 μL sizes Color-coded racks for easy volume identification The Axygen MultiRack tip system has been engineered to…
-
PYREX® Allihn Condensers
CorningAllihn - suitable for use in vacuum distillations With condensing tube expanded by series of bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip…
-
LSE™ 71L Shaking Incubators
CorningThis high performance shaking incubator has a full size glass door and internal light that allows easy viewing of samples without disturbing the chamber contents. Mechanical convection provides a safe, stable temperature environment and fast chamber temperature recovery after opening the door. The…
-
The Axygen Axyspin Plate Spinner is the first centrifuge designed specifically for quick and easy centrifugation of samples in PCR plates or microplates. Capacity for two standard plates Top loading design Exceptionally small footprint Starts and stops in seconds Use before and…
-
These Corning® hot plates have a durable glass-ceramic Pyroceram® 4 x 5 inch top and offer superior performance and reliability in a low profile, space-saving design. They operate on 100V/60Hz to meet needs in Japan and other locations with similar requirements. -Easy-to-read numbers simplify…
-
Carbon Residue Coking Bulb
CorningRamsbottom PYREX® For determination of carbon residue left on evaporating oil Meets ASTM D 524
-
Digital temperature and speed displays External temperature control Closed-loop control Hot plate stirrers use microprocessor-controlled feedback technology to maintain consistent stir speed and temperature. Digital temperature display is adjustable in 5°C increments and indicates…
-
This 5.8L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO. Warning: Not for vacuum applications. Do not heat or …
-
This is an optional rotor for 6 x 15 mL, 2 x 50 mL and 2 x 15 mL combination, for use with Corning® LSE™ Compact Centrifuge. Features: Maximum Speed: 6,000 rpm/4,387x g Equal G force for all configurations Accepts both conical and round bottom tubes (not compatible…
-
LSE™ Digital Dry Bath Heaters
CorningThe Corning Digital Dry Bath Heaters are available in single, dual, and four block configurations and provide a broad temperature range up to 150°C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories. They…
-
The Corning® LSE™ Compact Centrifuge is a space saving centrifuge ideal for use in Life Science and Industrial Research labs. Three angle rotors are available for use with the Corning LSE Compact Centrifuge, which can accommodate tube sizes of 15 mL, 50 mL, and 1.5/2.0 mL microcentrifuge…
-
Condensers have water-jacketed Standard Taper inner joint. Complete with condenser, flask and extraction tube. The low thermal expansion rate means that the PYREX brand extractors can be routinely used in applications requiring protracted heating at temperatures as high as 230°C. The inherent…
-
The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake.…
-
These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…
-
This 2.4L PYREX® desiccators has a rugged 24/29 Standard Taper external sleeves with tooled hose connections that serve as the stopcock. It is designed so that its manipulation is not affected by the vacuum. The open position is indicated by the molded arrow on the cap. A quarter turn from this…
-
These PYREX® desiccator cover sleeve rings are replacements for 2.2L desiccators No. 3118-160.
-
This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is…
-
PYREX West Condensers
CorningAvailable with 200 or 300 mm long heavy-wall outer jackets PYREX® West condensers are designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage.…
-
Hot Plate Accessories
CorningAccessories and replacement parts are available for Corning hot plates, stirrers and hot plate/stirrers including 230V Euro-style power cords, 120V power cords, and a 100V power cord.
-