Corning, NEW! Life Science
-
Horizontal Gel Boxes
CorningAxygen horizontal gel boxes are high-quality, full-featured units designed for exceptional durability and efficiency. The gel boxes feature leak-free external gel casting, which allows you to cast one gel outside of the box while another gel is running inside. The units are available in four…
-
PC-200 Series Hot Plates
CorningSuperb linear control Minimum heat up times Low-profile; requires less space Meets testing standards for electrical safety Temperature range: 25 to 550°C Features Pyroceram® top for uniform heating Improved design offers sealed electronics which protect the unit and reduce maintenance costs.…
-
These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…
-
Lambda Plus Pipettors have been engineered to provide the highest levels of accuracy, reproducibility, and comfort. Lambda Plus Pipettors feature smooth plunger movement and extremely low pipetting forces. Volume can be set by turning either the thumb wheel or the plunger button, and a locking…
-
Single Block, 24 x 0.5 ml tubes
CorningThis is a single block, 24 x 0.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath.
-
Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.
-
This 2.4L PYREX® desiccators is designed for general analytical work. The sturdy knob makes the cover easy to handle. Approximate bowl volume is 2400mL. For replacement cover, see No. 3081-150CO. For lower part only, see No. 3081-150LO. Warning: Do not heat or subject to pressure. Not for…
-
These 45mm diameter PYREX® coarse porosity (40 to 60µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long. For PYREX®…
-
LSE™ Compact Centrifuge
CorningThe Corning® LSE™ Compact Centrifuge is a space saving centrifuge ideal for use in Life Science and Industrial Research labs. Three angle rotors are available (sold separately) for use with the Corning LSE Compact Centrifuge, which can accommodate tube sizes of 15mL, 50mL, and 1.5/2.0mL…
-
These motor-driven PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet…
-
Corning® Cell Counter
CorningAccurate Cell Counts in a Flash For years, the choice between manual and automated cell counting has been a difficult one. Manual cell counting, on the one hand, is accurate, but time-consuming and very userdependent. Automated cell counting, is much faster and less user-dependent, but the cost…
-
These PYREX® chromatography columns have a reservoir at top and a Product Standard 2mm bore PTFE (Polytetrafluorethylene) plug stopcock at the bottom. The top opening will accept a #2 rubber stopper.
-
These PYREX® desiccator cover sleeve rings are replacements for 2.2L desiccators No. 3118-160.
-
Tris Hydrochloride Buffers, 1M
CorningTris-HCl buffer has many applications in molecular biology work, including use in nucleic acid purification. This product can be diluted to obtain the desired concentration. Complete Certificate of Analysis available for each production lot, along with full formulation information. …
-
Organoid Counting Software
CorningBy purchasing the software extension, customers will be able to accumulate concentration in orgs./mL and collect surface area data in micrometers squared of their 3D cell cultures; a feat that existing standalone brightfield cell counters simply cannot offer. At launch, we are introducing 2…
-
These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…
-
LSE™ Digital Dry Bath Heaters
CorningThe Corning Digital Dry Bath Heaters are available in single, dual, and four block configurations and provide a broad temperature range up to 150°C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories. They…
-
These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…
-
Scholar PC-170 Hot Plate
CorningHeat transfer up to 360 °C White enameled steel top plate Compact 5” x 5” size Dual heat shields for safety Economically priced Dual heat shields dissipate heat and keep the case cool to the touch. Control knob has off function, extra-large numbers and is infinitely adjustable…
-
PYREX Cloud & Pour Test Jars
CorningFor ASTM D-97, D-1500, D-2500 Cylindrical with flat bottom, beaded rim and marking spot Height 121 mm; o.d. 35 mm With graduation ring 51 mm from bottom
-
PYREX Graham Condensers
CorningGraham Coiled condensing tube is sealed into water jacket Inlet and outlet tubes on opposite sides of jacket With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has 19/38 joints; others have Standard Taper 24/40 joints
-
Falcon Pipette Controller - St
CorningThe light, ergonomic, motorized pipet controller Designed for use with glass and plastic serological pipets from 0.5 to 100 mL volume ranges. Conveniently positioned switches change operating modes and speeds quickly to handle different liquid volumes and viscosities. Aspirating and…
-
The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake.…
-
The 10x300mm PYREX® column is designed for general chromatographic column separations. The top is tooled for a No. 00 rubber stopper fit. A PTFE (Polytetrafluorethylene) Product Standard stopcock with a No. 2 plug is provided for better column control. Sealed into the column in a coarse porosity…
-
PYREX Hybridization Tubes
CorningFor use in hybridization incubators with rotators Three sizes Include GL 45 plug-seal screw caps Graduated A convenient method which requires smaller probe solution volumes. Three lengths (100, 150 and 300 mm) fit most popular hybridization apparatus. Caps have silicone O-rings…
-
LSE™ 49L Shaking Incubators
CorningThis cabinet-style incubator has a compact footprint and can also be stacked to maximize space efficiency. The built in orbital shaker accepts a large assortment of platforms and clamps that can accommodate flasks, Petri dishes, and test tube racks. The maximum capacity is 4 x 1L flasks. …
-
PYREX® Ten Broeck Homogenizer
CorningThese 40mL capacity PYREX® homogenizers are designed for grinding small samples for pathological and biochemical work. The catch basin bulb has a 55mm outer diameter. Made in accordance with Federal Specification DD-T-363a. It may be used manually but is adaptable for use with a slow speed…
-
This 2.4L PYREX® desiccators has a rugged 24/29 Standard Taper external sleeves with tooled hose connections that serve as the stopcock. It is designed so that its manipulation is not affected by the vacuum. The open position is indicated by the molded arrow on the cap. A quarter turn from this…
-
These PYREX® extra coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. .
-
The Corning® Lambda™ EliteMax Semi-automated Benchtop Pipettor can perform a variety of liquid handling tasks including: Plate filling from reagent reservoirs Serial dilutions, plate-to-plate transfers, tube-to-tube transfers, and plate replication Well-to-well transfers…
-
Hot Plate Accessories
CorningAccessories and replacement parts are available for Corning hot plates, stirrers and hot plate/stirrers including 230V Euro-style power cords, 120V power cords, and a 100V power cord.
-
This 10.5L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO. Warning: Not for vacuum applications. Do not heat…