Corning, Equipment
-
These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…
-
PC-200 Series Hot Plates
CorningSuperb linear control Minimum heat up times Low-profile; requires less space Meets testing standards for electrical safety Temperature range: 25 to 550°C Features Pyroceram® top for uniform heating Improved design offers sealed electronics which protect the unit and reduce maintenance costs.…
-
Horizontal Gel Boxes
CorningAxygen horizontal gel boxes are high-quality, full-featured units designed for exceptional durability and efficiency. The gel boxes feature leak-free external gel casting, which allows you to cast one gel outside of the box while another gel is running inside. The units are available in four…
-
PYREX Liebig Condensers
CorningWith Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.
-
LSE™ Benchtop Shaking Incubators
CorningTruly a benchtop style, the lid on the Corning benchtop shaking incubator has a low pivot point which provides a space-saving size sure to fit on the lab bench and under shelves. Each unit includes a software package, which provides the option of saving data to an external computer or monitoring…
-
The Axygen® horizontal gel box accessories are designed to offer exceptional durability and efficiency. These accessories provide excellent value and years of reliable service.
-
Multi Position Stirrers
CorningReliable DC motors Available in 4, 5 and 9 position models Stirs at speeds up to 2,000 rpm Stir up to 9 vessels at the same time with these Multi Position Stirrers. The stirrers' magnets and DC motors provide smooth well-coupled stirring up to 2,000 rpm. The speed of all positions on the units…
-
This 5.8L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO. Warning: Not for vacuum applications. Do not heat or …
-
Scholar PC-170 Hot Plate
CorningHeat transfer up to 360 °C White enameled steel top plate Compact 5” x 5” size Dual heat shields for safety Economically priced Dual heat shields dissipate heat and keep the case cool to the touch. Control knob has off function, extra-large numbers and is infinitely adjustable…
-
Corning offers a 7/16" (1.1cm) diameter by 6 1/2" (16.5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3" (9mm) and 0.15" (3.75mm), for holding probes. It is designed to be used with a boss head clamp (Corning Cat. No. 440140) or standard…
-
The Corning Step-R is a repeating pipettor suitable to dispense volatile, dense, viscous, or foaming liquids, and for all applications where long dosing series are required. It works with 8 syringe tip sizes to dispense doses from 1 μL up to 5 mL. The lightweight construction, ergonomically…
-
E-Cube Culture System
CorningThe E-Cube System is a simple bioreactor with 8,500 cm 2 cell growth area for growing anchorage dependent cells in only a 25.4 cm x 35.6 cm footprint. Cells grow in Corning parallel-plate CellCube Module on the same treated polystyrene used in Corning culture vessels. The E-Cube System kit…
-
PC-410d & PC-610d Stirrers
CorningConsistent, reliable stirrer speed Digital display Glass ceramic top Conserves lab space Easy-to-use stirrers with digital displays indicate stir speed settings. Microprocessor-controlled feedback maintains consistent repeatable stir speed. Control automatically adjusts motor strength to…
-
These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…
-
Tube 24/40
CorningThese PYREX® connecting distilling tube adapters have full-length inner 24/40 Standard Taper joints of same size. The connecting arm is approximately at a 75° angle from vertical and is 200mm long.
-
PYREX West Condensers
CorningAvailable with 200 or 300 mm long heavy-wall outer jackets PYREX® West condensers are designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage.…
-
Corning® Lambda™ EliteTouch™ pipettors have been engineered to provide the highest levels of ergonomics, accuracy, and precision. Lightweight construction, contoured shape of the handle, and 4-digit counter were designed to ensure comfortable pipetting. All pipettors feature smooth…
-
With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105° angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint
-
-
Distilling Tube Connector
CorningStandard Taper 10/30 thermometer opening, distilling, three-way, Standard Taper joints Sidearm is at an angle approximately 75° from the lower part of the vertical tube The joint on the sidearm is at an angle approximately 105° from the sidearm The sidearm and lower tube…
-
PYREX Hybridization Tubes
CorningFor use in hybridization incubators with rotators Three sizes Include GL 45 plug-seal screw caps Graduated A convenient method which requires smaller probe solution volumes. Three lengths (100, 150 and 300 mm) fit most popular hybridization apparatus. Caps have silicone O-rings…
-
PYREX Cloud & Pour Test Jars
CorningFor ASTM D-97, D-1500, D-2500 Cylindrical with flat bottom, beaded rim and marking spot Height 121 mm; o.d. 35 mm With graduation ring 51 mm from bottom
-
LSE™ Compact Centrifuge
CorningThe Corning® LSE™ Compact Centrifuge is a space saving centrifuge ideal for use in Life Science and Industrial Research labs. Three angle rotors are available (sold separately) for use with the Corning LSE Compact Centrifuge, which can accommodate tube sizes of 15mL, 50mL, and 1.5/2.0mL…
-
PYREX Stark-Dean
CorningPYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123
-
Single Block, 24 x 1.5 ml tubes
CorningThis is a single block, 24 x 1.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.
-
Corning LSE Mini Incubator
CorningCorning LSE Mini Incubator 115V comes with a shelf and has a port to insert a thermometer to track change in temperature
-
This stand is designed to hold six Corning® Lambda™ plus single-channel pipettors.
-
This PYREX® Friedrichs type condenser affords very efficient operation. The helical inner tube fits closely within the jacket. The vapor tube is sealed to the jacket at an angle of 75° and has an outer 24/40 Standard Taper joint.
-
Hot Plate Accessories
CorningAccessories and replacement parts are available for Corning hot plates, stirrers and hot plate/stirrers including 230V Euro-style power cords, 120V power cords, and a 100V power cord.
-
This stand is designed to hold one Corning® Lambda™ plus 8-channel or 12-channel pipettors.
-
This 2.4L PYREX® desiccators is designed for general analytical work. The sturdy knob makes the cover easy to handle. Approximate bowl volume is 2400mL. For replacement cover, see No. 3081-150CO. For lower part only, see No. 3081-150LO. Warning: Do not heat or subject to pressure. Not for…
-
LSE High-Speed Microcentrifuge
CorningFast acceleration to a maximum speed 13,300 rpm/16,300 x g Complete with easy access, 24 x 1.5/2.0 mL aluminum rotor Precise, digital control system Set and view rotor speed in rpm or g-force Quiet and cool running, even at maximum