Corning, Burets
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…
-
Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.
-
Falcon® Cell Strainers
CorningA faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues Consistently obtain a more uniform single-cell suspension Three nylon mesh pore sizes for optimal performance in a…
-
Disposable Tissue Culture Tubes
CorningScrew cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…
-
PYREX® Economy Grade Burets
CorningWith replaceable components Corning 2116 series Tooled tops Screw thread stopcock Reduce replacement costs with replaceable components. Tooled tops and bottoms. White enamel graduations. Ground glass tip. Plain top.
-
This 50mL PYREX® tube is for general hospital laboratory work. It was designed by Dr. F.N.L. Taylor, Boston City Hospital, for determinations involving multiple calibrations and for carrying out digestions. Graduated at 12.5, 25, 35 and 50mL, and supplied with a durable, white enamel marking spot.
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
PYREX® Class A Burets
CorningPrecision bore tubing is used these 10mL-100mL Class A PYREX® burets to assure accuracy between any two points. The capacity tolerance on these burets is established by ASTM E-287 and is calibrated in accordance with ASTM E542. Each buret is individually serialized and supplied with a…
-
Buret 250 ml
CorningThese 250mL PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls,…
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Corning® 50mL Mini Bioreactor
CorningFeatures and Benefits Polypropylene tube with large marking spot to clearly identify tube contents and experimental parameters Polypropylene cap with 4 vents; hydrophobic membrane provides gas exchange Sterile, nonpyrogenic and RNase-/DNase-free .
-
These disposable 20x150mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 30mL, are made from borosilicate glass, bulk-packed and are sold…
-
Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…
-
These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.
-
Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g
-
Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; …
-
PYREX Class A Burets
CorningSerialized Colored scale Teflon® stopcock plug The capacity tolerance on Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable…
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.
-
Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…
-
Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…
-
The Axygen® 1.5 mL self-standing screw cap micro centrifuge tube in blue, is made of high quality polypropylene material.
-
Tube 40 ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these…
-
PYREX® Conical Centrifuge Tubes
CorningGraduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…
-
Precision bore tubing is used these 25mL Class A PYREX® burets to assure accuracy between any two points. Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taper stopcock gives precise control. All sizes furnished with a 2mm bore stopcock plug. For…
-
PYREX® Test Tubes
CorningWith lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
Tube 10mL Self Stand Screw Cap
CorningSkirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached
-
These PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls, these burets have a…