Corning, Burets
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…
-
PYREX® Rimless Culture Tubes
CorningThese reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.
-
These 50mL PYREX® round bottom, nongraduated centrifuge tubes have a No. 13 Standard Taper solid glass pennyhead stopper. Rockefeller Institute of Medical Research type.
-
For use in educational laboratories where Class A accuracy is unnecessary Made from uniform bore tubing, with red graduations which are permanently fused onto the glass and remain sharply legible Straight glass tip stopcock with 2 mm bore Teflon stopcock plug; supplied with plastic dust cover
-
Corning® 50mL clear polypropylene (PP) preassembled closed systems self-standing centrifuge tubes come with the advanced polyethylene CentriStar™ caps. The CentriStar™ cap has an easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design…
-
-
These 50mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
The capacity tolerance on these burets is established by ASTM E 287 and they are calibrated in accordance with ASTM E 542. Tips are carefully drawn from accurate bore tubing to ensure proper drainage rates. This buret has colored markings, fine, sharp lines and large easy-to-read numbers. The…
-
Buret 50 ml Auto
CorningThese 50mL PYREX® burets have an automatic zeroing device and dual Rotaflo® stopcocks for easy controlled filling. Greaseless Rotaflo® stopcocks allow smoother control and help eliminate titrating errors
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
Axygen® screw cap tubes feature a cap that provides a tight secure seal. Self standing screw top microcentrifuge tube with "O" ring cap Made of polypropylene Volume: 1.5mL Cap color: Red Pre-sterilized
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
Tube 10mL Self Stand Screw Cap
CorningSkirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
Precision bore tubing is used these 25mL Class A PYREX® burets to assure accuracy between any two points. Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taper stopcock gives precise control. All sizes furnished with a 2mm bore stopcock plug. For…
-
PYREX® Replacement Inlet Tube
CorningThis specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…
-
Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; …
-
Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.
-
This 50mL PYREX® tube is for general hospital laboratory work. It was designed by Dr. F.N.L. Taylor, Boston City Hospital, for determinations involving multiple calibrations and for carrying out digestions. Graduated at 12.5, 25, 35 and 50mL, and supplied with a durable, white enamel marking spot.
-
For 9195R10 series plant tissue culture tubes Autoclavable caps available in natural or orange color. Two positions: closed, for humidified environments; and open, for gas exchange. Drip ring minimizes contamination. Flexible interval ribs hold cap firmly in place.
-
Axygen® 0.65mL and 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Features Available in 0.65mL single MiniTube or 1.1mL single MiniTube and…
-
Mini Tube Strip Caps
CorningAxygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…
-
-
Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.