Corning, Flasks
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
Sterile Flask of optically clear polystyrene, tissue culture treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas…
-
Helps adapt cells to reduced serum or serum-free conditions 25, 75 or 150 cm 2 sizes 10, 60 or 210 mL maximum working volumes Rectangular canted neck cell culture flasks have been treated with a patented Corning® CellBIND surface treatment for optimal cell attachment.…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
Flask Complete 4000 ml
CorningThese PYREX® 4L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Translucent polypropylene flasks are manufactured with blue graduations for reference. The flasks have a screw neck and are supplied with a PP cap. Translucent polymethylpentene flasks are manufactured with red graduations for reference. The flasks have a screw neck and are supplied with a PP cap.
-
DNR (Latex) free Usage: CELLine 1000 Device high density cell cultivation system for antibody and recombinant protein production. Does not have Latex labeling. Package does not have Latex. Product has no Natural Rubber/Latex.
-
Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.
-
Flask Complete 6000 ml
CorningThese PYREX® 6L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
These PYREX® heavy wall flasks have seated a bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers.…
-
Spectral transmission varies from 0 at 300 nm to 4% at 500 nm With barrel-shaped, No. 27 Standard Taper stopper Capacity: 250 mL The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand labware.
-
These PYREX® standard volumetric flasks conform to Class A capacity tolerances prescribed by ASTM. However, to facilitate transfer of crystals, salts and powders, the open end has been expanded on the 25mL and 50mL sizes. The standard 18-410 G.P.I. thread screw caps have a durable cone-shaped…
-
Disposable Spinner Flasks
Corning70 mm top cap Two angled side-arms Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Made of USP XXXIII Class VI polystyrene, the vessel is comparable to…
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Similar to 4997B13 series, but with protective PVC coating Coating promotes longer product life and greater safety and helps contain glass and contents should breakage occur Autoclavable and microwaveable to 121°C (250°F) Resistant to thermal shock With PYREX Standard Taper stopper
-
Side baffles enhance aeration and agitation of flask contents Vessels are borosilicate glass Patented “stretch” impeller design ensures optimal stirring. Consistent height-to-width ratios provide greater predictability in scale up across the full range of vessel sizes.…
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
PYREX Vacuum Filter Flask
CorningFor use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing
-
Flask 500 ml
CorningThese 500mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint.
-
These PYREX VISTA volumetric flasks are designed for use by customers that do not require the precision accuracy of our Class A capacity flasks. The shape, body and wall are the same as regular flasks but display the large blue marking spot and designation "PYREX VISTA" unique to the…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
Pear-shaped boiling flasks have full length outer 14/20 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their…
-
Increase productivity by enabling to grow more cells faster and easier. 3- or 5-layer formats provide 525 cm² and 875 cm² cell growth surface area, respectively. Even distribution of media across all layers for homogeneous cell growth Ability to mix cells and reagents in the…