Vacuum Filter Flask

Compare Tool

Select up to 3 products

Vacuum Filter Flask
1 - 32 of 84
Sort
View
Show
  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce (a Thomas Scientific Brand)

    …Simply plug the filter onto your vacuum line, and begin filtering your solvent without any complex setup. The FDA-grade Polypropylene housing provides vastly improved chemical compatibility over the usual Polystyrene bottle top filter. The labForce Solvent Filtration vacuum filters are a safe…

  • PYREX Vacuum Filter Flask

    Corning

    For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • Whatman WT 100 Witt's Flask

    GE Healthcare

    WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. The bottle is made…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    …glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter is 47mm. Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum.

  • Filtering Kit

    United Scientific Supplies

    An excellent, faster working, alternative to traditional gravity based liquid filtration. Contents: 500ml Filtering Flask 90mm porcelain Buchner Funnel Hand Vacuum Pump with Gauge Pack of 90mm Filter Papers (pack/100) Rubber Stopper Vacuum Hose Instruction Manual

  • Sigma-Aldrich® vacuum filtration assembly

    MilliporeSigma

    for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • Whatman SF 100 Suction Flask

    GE Healthcare

    SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories

  • Tygon® S3™ E-3603 Laboratory Tubing

    DWK Life Sciences (Kimble)

    …a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters. Phthalate-free and BPA-free Outstanding chemical resistance Non-oxidizing and non-contaminating Smooth inner bore helps prevent build-up Vacuum rating…

  • KimCote® Filtering Flasks

    DWK Life Sciences (Kimble)

    …from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump.

  • PYREX® VISTA™ Filtering Flasks

    Corning

    …the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent blue enamel marking spots. The filtering flask is designed to ASTM E-1406 Type 2. Heavy Wall Filtering Flasks These PYREX® VISTA™ filtering flasks

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …includes two shatterproof Foxx Heavy Duty Vacuum Bottles (autoclavable PP or chemically-resistant HDPE), each with a patented VersaCap closure for tangle-free opening --no need to disconnect tubing, ever. A 0.2µm PTFE Inline Vent Filter retains any aerosolized bacteria, and the…

  • 47mm Magnetic Filter Funnels

    Pall Life Sciences

    For vacuum filtration of liquids, especially for the analysis of aqueous samples for microbiological and particulate contamination using the Membrane Filter (MF) Technique. The Magnetic Filter Funnel is ideal for use with a filter funnel manifold or side-arm vacuum flask using a rubber stopper…

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    …glass Vacuum hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm diameter flask, 76 mm diameter…

  • Scienceware® Filtering Flask with Side Arm

    Bel-Art Products

    These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

  • Vaccum Filtering Flasks

    MilliporeSigma

    Side arm connects to vacuum source with 3/8" I.D. hose. 1 L and 4 L flasks accept No. 8 perforated stopper. 125 mL flask accepts No. 5 stopper. These side-arm flasks are designed for use in vacuum filtration procedures with various filter holders. Features & Benefits …

  • Aspirator with Trap Flask

    Grant Instruments

    …and storing, such that a tip can be re-used. A suction microbiological filter eliminates risk of contamination from the trap flask with bacteria, viruses and infected particles. The suction microbiological filter is hydrophobic: with efficiency up to 99.9% it holds particles bigger than 0.027…

  • Funnel / PTFE Supp Assy 47mm

    DWK Life Sciences (Kimble)

    This 47 mm vacuum microfiltration assembly is used for autoclaving with the filter in place and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base,…

  • Polypropylene Filtering Flasks

    Thermo Scientific Nalgene

    Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    filter acidic solutions at a higher flow rate. Available in four graduated funnel capacities 100, 300, 500, or 1000 mL. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. The optional 2" glass extention allows for physical separation of the 47mm filters

  • Ultra-Ware All-Glass Microfiltration Apparatus

    DWK Life Sciences (Kimble)

    …drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus is supplied with funnel, anodized aluminum clamp, fritted glass support base and filtration flask. Joints are Standard Taper 40/35. Recommended when filtering viscous or proteinaceous solutions to…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    DWK Life Sciences (Kimble)

    …positioning of the connector provides greater flask stability, as tubing angled downward has less tendency to tilt the flask Flasks are designed for vacuum to 29” of mercury Made with a heavier wall than a standard Erlenmeyer flask Manufactured from 33 expansion, low extractable…

  • 25mm All-Glass Filtration Assemblies

    Advantec MFS

    Filter small volumes  Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as…

  • Vacuum Filter Holder Set with PTFE-Coated Funnel & Base

    United Scientific Supplies

    …and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • No. 8 Perforated Stopper

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • 10L Bottle/Filter Flask

    United Scientific Supplies

    With its thick glass walls and sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an accuracy…

  • P-Vac Portable Vacuum System

    Argos Technologies

    …bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when the…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…

  • Filter Funnel, Threaded

    Thermo Scientific Nalgene

    … Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber stopper with a 9/16” (15 mm) hole.

  • Vacuum Filter Holder Set with Stainless Steel Screen

    United Scientific Supplies

    …and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to vacuum. Prefilter Diameter: Thick Depth Prefilter: 35mm. Membrane Prefilter:…

  • MiniVac 45mm Barbed Cap, Polypropylene, 1/EA

    Argos Technologies

    flask crack or leak. Full flasks can be transferred safely by using supplied transfer cap. Small footprint (7.5 in.); easy clean up with 70% isopropyl alcohol. Safely aspirate and transfer waste Clear safety reservoir collects liquid in case flask cracks or leaks Use with in-house vacuum

  • 600 ml Fast-Freeze Flask Bottom

    Labconco

    Flasks, they withstand extreme temperatures and high vacuum. Made of borosilicate glass 600 mL Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom and a supply of filter

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.