BrandTech®, Bottles
-
Replacement piston/cylinder cartridges for seripettor and seripettor pro. Non-Sterile 10mL pack of 3
-
Stainless Steel Test Tube Racks
BrandTech®Stainless steel racks are constructed entirely of rugged, corrosion-resistant 304 stainless steel. Highly polished surfaces reduce porosity and reinforce the corrosion-resistant properties.
-
Fits BRAND Transferpette pipettes and other instruments using ultra-micro/crystal tips, standard 200uL yellow, or 1000uL blue tips Extra volume allows reverse pipetting at high volumes Oleamide and diHEMDA free Rnase/DNA free Five filled 96-tip boxes; 480 tips total
-
BRANDplates® inertGrade™ 96-well microplates for cultivation of suspension and stem cells are available in a full range of well shapes and colors. These individually wrapped sterile plates have orange embossed alphanumeric lettering for easy identification of surface treatment and well…
-
Accu-Jet Pipette Controller Accessories
BrandTech®Thomas No. 7780A52 Wall rack: Saves bench space and securely stores instrument Thomas No. 7780A55 Snap Tapes: for easy cleaning (12 x 65mm)
-
Durable square bottles made from high-density polyethylene (HDPE) with low-density polyethylene (LDPE) screw caps. V94189 is made of LDPE and has a polypropylene (PP) screw cap.
-
Suitable for a variety of immunological applications, such as ELISA, RIA, and FIA. These polystyrene surfaces for solid phase assays are available with three different surface modifications. Depending on the characteristics of the molecules to be attached on the surface the preferred…
-
VITLAB® VITsafe™ Safety Wash Bottles
BrandTech®Bottles made from LDPE (or PP for Acetone), with PP wash tube. A colored VENT-CAP allows easy visual identification. Media name in English, Spanish, French and German chemical formula, CAS No, hazard pictogram, signal word Risk Phrases (H phrases), safety phrases (P phrases), as well…
-
High-density polyethylene (HDPE) wide mouth square bottles with low-density polyethylene (LDPE) screw caps.
-
PFA Narrow Mouth Reagent Bottles
BrandTech®These leach-resistant bottles are excellent for long term storage of solvents and trace analysis standards. They are manufactured from perfluoxy copolymer (PFA) for excellent resistance to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and…
-
Accessories for BRAND Plates
BrandTech®BRAND offers a wide selection of accessories for multiwell plates including lids and sealing films. To protect samples, reaction batches, or cell cultures from both contamination and evaporation, compatible lids are available for all BRANDplates and microplates. The lids are made of…
-
Rigid Frame 96-Well PCR Plates
BrandTech®• High stability and rigidity from polycarbonate frame • Rapid heat transfer due to thin walls • Suitable for all standard thermal cyclers and automation compatible • Free of DNA, RNase, DNase, Pyrogens and PCR-Inhibitors For medium and high…
-
BRAND Non-Sterile Pipette Tips - Bags
BrandTech®Fits BRAND Transferpette pipettes and other instruments using ultra-micro/crystal tips, standard 200uL yellow, or 1000uL blue tips Extra volume allows reverse pipetting at high volumes Oleamide and diHEMDA free Rnase/DNA free
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Slope-shouldered polypropylene (PP) wide mouth reagent bottles with PP screw caps.
-
Suitable for a variety of immunological applications, such as ELISA, RIA, and FIA. These polystyrene surfaces for solid phase assays are available with three different surface modifications. Depending on the characteristics of the molecules to be attached on the surface the preferred…
-
Rigid Frame 384-Well PCR Plates
BrandTech®• High stability and rigidity due to the polycarbonate frame • Rapid heat transfer from thin vessel walls • For automation and high-throughput applications • Free of DNA, RNase, DNase, Pyrogens and PCR-Inhibitors 384-well PCR plates are an…
-
Fits BRAND Transferpette pipettes and other instruments using ultra-micro/crystal tips, standard 200uL yellow, or 1000uL blue tips Extra volume allows reverse pipetting at high volumes Oleamide and diHEMDA free Rnase/DNA free Ten refill inserts of 96 tips each; 960 tips total
-
For use in the culture of a wide variety of adherent cells. These polystyrene BRANDplates® have been physically modified to ensure optimal adhesion of cells depending on the cell type and the incubation conditions (for example reduced serum concentration). CellGrade™ plates…
-
For safer, better contol of pipets up to 200 mL For use with glass or plastic serological or volumetric pipets Accommodates pipets from 0.1 to 200 mL Integrated hydrophobic filter helps prevent over aspiration Fits the hand for comfort and easy control Constructed of…
-
PFA Wide Mouth Reagent Bottles
BrandTech®These leach-resistant bottles are excellent for long term storage of solvents and trace analysis standards. They are manufactured from PFA (a perfluoxy copolymer) for excellent resistance to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and…
-
VITLAB Powder Funnels, Polypropylene
BrandTech®These polypropylene powder funnels feature a wide spout for easy transfer.
-
VITgrip™ Lab Bottles
BrandTech®NEW! The VITgrip™ laboratory bottle from VITLAB ® is optimized for storage and sample collection of liquids in the lab. The innovative design features a molded, ergonomic grip, highly accurate graduations (± 5%), and provides protection against liquid leakage. Product…
-
Measuring Scoops
BrandTech®Measuring scoops of polypropylene and polyethylene in a variety of sizes. Volume marked in mL on the handle.
-
Polypropylene (PP) slope-shouldered reagent bottles with PP stoppers. Bottle V100894 includes handle.
-
Class A, USP, certified graduated pipette. Type 2 total delivery pipette only requires setting meniscus one time. In the DIN EN ISO 835 standard, the waiting time has been reduced from 15 to 5 seconds. High contrast blue enamel represents the optimum combination on resistance and readability. Full…
-
Bottles, LDPE, with PP Screw Caps
BrandTech®Low-density polyethylene (LDPE) bottles with polypropylene (PP) screw caps.
-
For use in the culture of a wide variety of adherent cells. These polystyrene BRANDplates® have been physically modified to ensure optimal adhesion of cells depending on the cell type and the incubation conditions (for example reduced serum concentration). cellGrade™ plus plates…
-
Low-density Polyethylene (LDPE) Bottles with Polypropylene (PP) Screw Caps.
-
Measuring Scoops
BrandTech®Measuring scoops of polypropylene and polyethylene in a variety of sizes. Volume marked in mL on the handle.
-
Fits BRAND Transferpette pipettes and other instruments using ultra-micro/crystal tips, standard 200uL yellow, or 1000uL blue tips Extra volume allows reverse pipetting at high volumes Oleamide and diHEMDA free Rnase/DNA free Ten filled boxes of 96 tips each; 960 tips total
-
Sterile plates feature untreated surfaces for use in a variety of laboratory tasks, such as homogeneous assays, screening and storage. These plates made of high-quality polystyrene feature an untreated surface. Clear plates are ideal for colorimetric applications and storage, white plates for…