PD-Tips: BRAND® PD-Tip™ II precision dispenser tips for repeating pipettes using standard tips. Automatically size recognized by BRAND® HandyStep® touch, HandyStep® touch S and HandyStep® electronic repeating pipettes. Also fits other repeating pipettes using…

BRAND Pipette Tips BRAND pipette tips are designed for use in a wide range of pipetting applications including the most sensitive assays. They are available in a variety of sizes and configurations for delivering volumes from 0.1µL to 10mL. BRAND tips are precision-molded from high purity,…

The RZ6 is part of the VACUUBRAND® XS series of rotary vane vacuum pumps. These pumps have been designed from the ground up for best performance in laboratory applications. The RZ6 is an excellent choice for freeze dryers up to 6 liters, benchtop centrifugal concentrators or other…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed…

NEW BRAND PCR tubes manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. They are manufactured without lubricants or chemical additives that can contaminate reagents and samples. These PCR tubes have thin, uniform walls to ensure…

BRAND offers a wide selection of accessories for multiwell plates including lids and sealing films. In cases where the multiwell plate needs not only to be covered, but also securely sealed, self-adhesive films are available. These film sheets can be applied on the plates and removed without the…

Class A, USP, certified single-volume bulb pipette. High Contrast blue enamel represents the optimum combination of resistance and readability. Available in all ISO sizes from 0.5mL – 100mL. Made of AR-GLAS®. The optimized flow geometry in the tip ensures reliable liquid dispensing from the…

BRAND's Dispensette® III bottletop dispensers are the third generation of a precision liquid dispensing instrument sold worldwide for over 30 years. The Dispensette III adds exciting new capabilities to the same standards of safety and reliability that made its predecessor, the Dispensette…

The seripettor   bottletop dispenser is an economical wiping seal dispenser suitable for many commonly used reagents in biological, clinical, medical, and chemical laboratories. It precisely dispenses a wide variety of liquids. Optional accessories, such as the flexible discharge tube, are…

These leach-resistant bottles are excellent for long term storage of solvents and trace analysis standards. They are manufactured from PFA (a perfluoxy copolymer) for excellent resistance to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and…

Polypropylene (PP) and styrene acrylonitrile copolymer (SAN) pitchers provide easy measurement of approximate volumes. V481-series pitchers are nesting to conserve space and have blue screened graduations. All others have molded graduations, with or without blue screened graduations.

Polycarbonate Mini Coolers safeguard various solutions such as enzymes, DNA, RNA, and cell suspensions by preserving freezer temperatures on lab benches. Crafted from sturdy polycarbonate filled with non-toxic gel, these coolers accommodate twelve microtubes ranging from 0.5 mL to 2.0 mL. When…

Service kits for VACUUBRAND® vacuum pumps. Due to the great variety of pumps, systems and service kits, it is highly recommended to consult your Operating Manual to select the proper kit prior to purchase.

Fits BRAND Transferpette pipettes and other instruments using ultra-micro/crystal tips, standard 200uL yellow, or 1000uL blue tips Extra volume allows reverse pipetting at high volumes Oleamide and diHEMDA free Rnase/DNA free Ten 96-tip refill inserts; 960 tips total

BRAND 96-well deep well plates are excellent for high throughput screening (HTS), assays requiring a mother plate, cell and tissue culture, sample storage, and more. They are available with 0.5mL, 1.1mL (1.0mL capped), and 2.2mL (2.0mL capped) well volumes. Manufactured from high-quality virgin…

Bottles made from LDPE (or PP for Acetone), with PP wash tube. A colored VENT-CAP allows easy visual identification. Media name in English, Spanish, French and German chemical formula, CAS No, hazard pictogram, signal word Risk Phrases (H phrases), safety phrases (P phrases), as well…

A vacuum pump excellent for many laboratory fluid movement applications including vacuum filtration and solid phase extraction, as well as degassing, and evaporation of volatile solvents. Ultimate vacuum: 52Torr (70mbar) Free air capacity: 38 lpm (1.4cfm) Whisper Quiet. Operation at…

Accessory for accu-jet® S pipette controller  • Suitable for tissue and cell culture applications • Polypropylene housing • Hydrophobic PTFE membrane

The BRAND Transferpette® electronic is an ergonomic, intuitive electronic pipette for use in most laboratory applications. It is available in five volume ranges for reliable dispensing of volumes from 0.5µL to 5mL. The soft-touch pipetting key, adjustable finger-rest, light weight and innovative…

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

HDPE buckets feature handles and molded pouring lips and graduations. PP lids available.

The QuikSip™ is a convenient bottletop aspirator that removes supernatants, cell culture media, and other liquids from dishes, flasks, culture bottles, centrifugation tubes, multiwell plates, and more. It is small, portable, and doesn’t require an external vacuum or power source. No…

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

The BrandTech power cord features a strong and durable construction and is used for various applications in industries, pharmaceutical factories and chemical laboratories.

Forceps made of polyoxymethylene (POM) and polymethylpentene (PMP), with either pointed or rounded ends.

The new MZ1C diaphragm pumps offer a compact, high performance and easy-to-use solution for many basic laboratory tasks, such as filtration, and smaller evaporative applications, such basic rotary evaporation, or small gel dryers. The functional, space saving and innovative design with readily…

The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons, or tip cones.Often not detectable by the naked eye, leaks lead to significant volume errors.The BRAND pipette leak tester (PLT unit) for air displacement pipettes…

Griffin beakers in polymethylpentene (PMP), polypropylene (PP) and ethylene tetrafluoroethylene (ETFE). Choose PMP for glass-like clarity, ETFE for extreme chemical resistance and PP for general purpose use. Beakers are screened with approximate volumes.

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

Class A, USP, certified graduated cylinders. High contrast blue enamel print represents the optimum combination on resistance and readability. Full ring marks and major graduations. Made with BRAND’s flexible screen stencils which ensures the volume markings match the calibration marks at all…

Polypropylene (PP) sample vials with low-density polyethylene (LDPE) snap-on caps.