Cannabis, Buchi
-
The BUCHI accessory is suitable for use with vacuum controller, heating baths or evaporator unit models. You can choose your ideal replacement part or accessory which ensures smooth functioning of units. These products are made of materials which offer enhanced durability.
-
Multivapor™ Evaporator
BuchiThe Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.
-
These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…
-
The Buchi seal holder is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.
-
Manual vacuum regulation can also be a very cost-effective solution. Air is drawn in through a fine regulation valve and the resulting vacuum is set. A manometer displays the pressure. The recommended Woulff bottle acts as a buffer vessel and condensate trap.
-
Vacuum Pump V-300
BuchiThe economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…
-
The Buchi SVL 15 seal is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe, sold as 5 per set.
-
Buchi Bump Trap STJ
BuchiPlaced between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.
-
The Buchi vacuum seal is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.
-
1230D81 - Buchi R-210 Rotavapor Vapor Duct, 29/32 for A-Condenser. Prevents cross-contamination and is particularly easy to dismantle and clean. The vacuum seal is manufactured from PTFE composite material and provides long service life with effective sealing. 1230D82 - Buchi R-210…
-
V-700/710 Secondary Condensers Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation…
-
B-585 Glass Oven Drying
BuchiFor small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…
-
The BUCHI accessory is suitable for use with melting and boiling point instruments. You can choose your ideal replacement part or accessory which offers smooth functioning of the models. These products are made of materials which ensure long lasting life.
-
Interface I-100
BuchiThe I-100 is an easy to use interface that controls the vacuum digitally. It is optimally suited to on/off-regulate the Vacuum Pump V-100. 1190U96 Compatibility Pack: For V-100 and V-700/V-710, with support set, communication cable, power pack, valve unit not included. Vacuum…
-
Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…
-
Cover Heating Bath B-491
BuchiTwo heating baths are available for the Rotavapor R-210 and R-215. With a heating capacity of 1300 W, they provide enough energy for a fast distillation. The mayor differences between the bath B-491 and B-495 are the bath size and temperature range. The B-491 can be used as a water and oil bath up…
-
The Buchi type s condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.
-
The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…
-
The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.
-
Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).
-
Multivapor™ Evaporator
BuchiThe Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.
-
These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.
-
These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…
-
Evaporating Flask
BuchiThe Buchi evaporating flask with a capacity of 20 Liters is made from sturdy glass material and offers good resistance to chemicals, temperatures thus ensuring minimum thermal expansion.
-
A variety of accessories are available for use with Buchi evaporators
-
The Buchi type c condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.
-
Vacuum Pump V-100
BuchiThe Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum…
-
Buchi Spider Evaporator
BuchiSpider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.
-
The Buchi glass body assembly is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. Strong glass construction provides added durability and ensures good impact resistance.
-
The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…
-
The Buchi safety shield is one of the main accessory of rotavapor and is compatible to use with Multivapor™ evaporators. This shield ensures good safety for both the device and the user.