4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact…

11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place…

Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling. …

The Agilent Technologies accessory is used in GC (gas chromatography) equipment, which is used in analytical chemistry experiments to determine chemical components from sample mixture. This accessory assures smooth and reliable performance of the GC instrument. This product is only available to…

supplied with 1 PTFE stopper, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

In recent years, quality requirements as outlined by ISO 9000, GLP, GMP and NAMAS have assumed increasing importance. As a consequence, the recommendations of pharmacopoeias have become more influential in the pharmaceutical industry. Formal performance verification of UV-Visible spectrophotometers…

The Agilent Technologies holmium oxide/didymium glass filter kit is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be…

8-425 Screw Caps without Septa (2714S28) Open top polypropylene screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) …

Allows transmittance measurements of solid samples at various incident angles. The sample can be positioned through 360 degrees to the incident beam and is selectable to 1 degree. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis. Front Mounted,…

Rectangular fluorescence cell, quartz, anaerobic, 10 mm pathlength, 3.5mL, 1/pk. Includes inlet tubing and a reservoir (1.5mL) joined to the cell using a ground glass joint, for collecting excess gas produced by anaerobic experiments. Evacuation tube is 4 mm ID, 6 mm OD and 30 mm long. Compatible…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies temperature probe holder is suitable for use in 10 mm standard rectangular cuvettes. Application: For Use in Standard 10 mm Rectangular Cuvettes This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Manufactured from virgin polypropylene, meeting requirements of 21 CFR 177.1520. Wide opening glass/plastic vials have a glass flanged insert molded to the inside, so sample only comes in contact with high quality glass insert and septum. Polypropylene is chemically resistant and the material of…

Borosilicate glass 1.5 mL volume 12 x 32 mm Compatible with snap or crimp closures Designed for center needle during sample injection Not recommended for Vortex or in-vial sample concentration Agilent Technologies products are intended for sale/shipment within the…

Uniformly flat bottom ensures compatibility with inserts 2 mL, 12 x 32 mm Use with any 11 mm snap or crimp cap 40% larger opening than the standard narrow opening vials Easy way to seal vials without crimping. A consistently secure seal outperforms the loose fit of other snap…

The Agilent Technologies UV convenience kit comes with two open top UV quartz cell, 10 mm, 3.0 mL, 5061-3387 disposable polystyrene cells, 10 mm, 3.5 mL volume, 6610018800 cell tray with capacity for 16 cells, 5063-6577 lint-free lens cleaning paper, 9300-0761 and UV cell cleaning solution. This…

The Agilent Technologies #2 Pozi Kincrome screwdriver of 38 mm length, is suitable for general repair and maintenance purposes. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

The macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…

12 x 32 mm, Type 1 borosilicate glass Compatible with standard crimp closures 1.5 mL total volume Less than 5 µL dead volume Micro-V vials are compatible with standard crimp closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. They are…

Magnetic stir bars or star type stirrers provide uniform and thorough mixing of samples in cuvettes. The stir bars are recommended for the stirring module and Peltier thermostatted (1 x 1) cell holder. The star stirrer is recommended for Peltier thermostatted multicell holders for Cary UV-Vis…

Spacers are required to hold cells with an outer depth of less than 12.5 mm in the cell holder. For use with Agilent 89054A cell-stirring multicell transport and Agilent 89090A Peltier temperature controller. Stirring bars are used with cells having internal dimensions of 10 x 10 mm (W x D)…

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Polypropylene (PP) screw caps without septa are an economical choice. Use the caps and replace septa as needed. Choose from three cap colors for separating assays, lots, standards, etc. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent offers a range of cell holders, providing you with the ability to analyze a wide variety of samples. Standard, cylindrical, long pathlength, and variable pathlength cell holders, bases and test tube holders are all available for Agilent UV-Vis and UV-Vis-NIR systems. Application: For…

This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S.…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.