Cannabis, Flasks, DWK Life Sciences (Kimble)
-
KIMAX Graduated Erlenmeyer Flasks
DWK Life Sciences (Kimble)With pennyhead Standard Taper stopper Designed from ASTM Specification E 1404, Type II Class 2 requirements Scale indicates approximate volumes
-
KIMAX Brand Class A, Serial Numbered Volumetric Flasks
DWK Life Sciences (Kimble)NIST Traceable Barrel-shaped glass stopper Meets ASTM Standard E 694 and E 288 Designed from Federal Specification NNN-F-289, Type 1, Class A Serial number, marking spot and stopper
-
RAY-SORB® Class A Heavy-Duty Wide Mouth Volumetric Flasks
DWK Life Sciences (Kimble)RAY-SORB® processed to protect materials sensitive to the light of shorter wavelengths Less than 1% transmission below 400 nm and approximately 5% transmission from 400-600 nm Pipet access is easy with wide-mouth volumetric flasks Superior strength, durability and safety provided by…
-
KIMAX Narrow Mouth Erlenmeyer Filter Flasks
DWK Life Sciences (Kimble)Heavy glass, without side tubulation ASTM Specification E 1406, Type I With capacity scale 250 mL flasks take rubber stopper No. 6; 500 mL flasks take No. 7; 1,000 mL flasks take No. 8; 2,000 mL flasks take No. 9; 4,000 mL flasks take No. 12. Flasks are fabricated from molded heavy…
-
Erlenmeyer Flasks with Screw Caps, with Capacity Scales
DWK Life Sciences (Kimble)KIMAX flask with a screw-thread finish. Used to mix and store culture media, and in other culturing techniques. Included are long caps with cemented-in white rubber liners, not attached. Designed from ASTM Specification E1404, Type III.
-
Flask Erlenmeyer 10ml
DWK Life Sciences (Kimble)Used for metabolic studies of biological materials. Particularly useful in measuring C 14 O 2 yields following incubation. Also suitable for in vitro incubations, insulin bio-assays, persulfate oxidations, and the “distillation” of any volatile acid or base. …
-
KIMAX Heavy Wall Filter Flasks
DWK Life Sciences (Kimble)Heavy glass with side tubulation for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and…
-
Colorware Class A Flasks
DWK Life Sciences (Kimble)Available with markings in four colors, the KIMAX® Colorware flasks are brighter in appearance than traditional glassware with white markings. These flasks are also commonly used to help reduce cross-contamination and for easy identification of glassware between labs. KIMAX®…
-
KIMAX Brand Class A Accuracy Volumetric Flasks
DWK Life Sciences (Kimble)KIMAX® flask calibrated to contain Class A accuracy but without a serial number Supplied with a polyethylene snap cap Replacement cap is 28150R Designed from ASTM Specification E288 requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…
-
KIMAX® Pink Colorware Narrow Mouth Erlenmeyer Flasks
DWK Life Sciences (Kimble)Please join us to support breast cancer prevention, treatment, and research by purchasing Pink Colorware from Kimble®. We will donate 20% of the proceeds to the Breast Cancer Research Foundation, the highest rated breast cancer organization in the United State. BCRF is recognized as one of the…
-
Erlenmeyer, Narrow Mouth Flasks, Standard Taper Joint, with Capacity Scales
DWK Life Sciences (Kimble)KIMAX flask with a full-length standard taper ground glass neck finish. Designed from ASTM Specification E1404, Type II, Class 1 requirements.
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Erlenmeyer Flask Starter Pack
DWK Life Sciences (Kimble)Range of sizes: 50 mL , 125 mL , 250 mL , 500 mL and 1,000 mL An assortment of popular size Erlenmeyer flasks that are ideal for those who need a variety of Erlenmeyers, but have limited lab space or glassware needs.
-
KIMAX Brand Class A, Serialized And Certified Volumetric Flasks
DWK Life Sciences (Kimble)Permanently marked with an individual serial number, providing an easy way to track items used during analytical testing Carefully selected to meet the Class A requirements as specified in ASTM E 288 - Standard Specification for Volumetric Flasks Supplied with a Certificate of Graduation…
-
Erlenmeyer Flasks, Plastic Safety Coated, with Screw Cap
DWK Life Sciences (Kimble)These KimCote® plastic-coated Erlenmeyer Flasks have large openings, GL 45 thread closures to make filling easier and provide tight seals during storage. Flasks come with blue polypropylene caps and clear pour rings. Marking spots and scales are durable white ceramic enamel.
-
Flask, Volumetric, Class A, Cap, 50 ml
DWK Life Sciences (Kimble)Permanently marked with an individual serial number, providing an easy way to track items used during analytical testing Carefully selected to meet the Class A requirements as specified in ASTM E 288 - Standard Specification for Volumetric Flasks Supplied with a Certificate of Graduation…
-
Volumetric Flasks, Class A, Standard Taper Stopper, Plastic-Coated
DWK Life Sciences (Kimble)KimCote® plastic-coated flask with a single graduation ring blasted on the neck, calibrated to contain. A ground glass stopper is supplied. Marking spots on all sizes. Designed from ASTM Specification E288, Class A unserialized requirements.
-
KIMAX Brand Volumetric Flasks With Stopper
DWK Life Sciences (Kimble)Calibrated "to contain", they are designed from ASTM Specification E288, Class B requirements Sizes 10 through 50 mL include Standard Taper 9 glass stopper; size 100 mL, Standard Taper 13; sizes 200 and 250 mL, Standard Taper 16, size 500 mL, Standard Taper 19; 1,000 mL, Standard Taper…
-
Jointed Narrow Mouth Erlenmeyer Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Tops are reinforced and tooled with a rounded finish, containing more glass to give them maximum mechanical strength Body is thick-walled, with a long tapered outside contour to minimize chipping when struck or rubbed together White…
-
Pear Shaped Boiling Flasks
DWK Life Sciences (Kimble)Single-neck flask with a Standard Taper outer joint at top Heavy wall Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Class A Square Volumetric Flask Calibrated
DWK Life Sciences (Kimble)Calibrated both "to contain" and "to deliver" (top line). Graduation rings and marking spot are blasted onto glass. ground glass stopper is supplied with the flask. Designed from ASTM Specification E288, Class A unserialized requirements. Replacement ground glass stopper is…
-
KIMAX® RAY-SORB® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PE…
DWK Life Sciences (Kimble)RAY-SORB Processed Glass with PE Stoppers Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with…
-
KIMAX® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PTFE Stoppers
DWK Life Sciences (Kimble)Clear Glass With PTFE Stoppers Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars …
-
Round Bottom Boiling Flasks, SJ Joint, Heavy Wall, with Plastic Safety Coating
DWK Life Sciences (Kimble)KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.
-
Flask Boiling Flat Bottom 500ml
DWK Life Sciences (Kimble)KIMAX® boiling flask with a short Standard Taper joint neck. Designed from ASTM Specification E1403, Type I, Class IV requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Colorware Narrow Mouth Erlenmeyer Flasks
DWK Life Sciences (Kimble)Available with markings in four colors, the KIMAX® Colorware flasks are brighter in appearance than traditional glassware with white markings. These flasks are also commonly used to help reduce cross-contamination and for easy identification of glassware between labs. All flasks…
-
KIMAX Erlenmeyer Flasks
DWK Life Sciences (Kimble)Tooled, heavy-duty top finish Tops are of carefully controlled diameter Scale indicates approximate volume Thick walled body with tapered contour to minimize chipping
-
Volumetric Flasks, Class A, Kohlrausch
DWK Life Sciences (Kimble)Capacity: 500mL Tolerance: ±0.20mL Rubber Stopper Size: 9 Approx. Height: 264mm
-
Flask Boiling Round Bottom 250ml
DWK Life Sciences (Kimble)KIMAX® round bottom boiling flask with a short neck and a medium length Standard Taper joint Designed from ASTM Specification E1403, Type II, Class III requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
KimCote® Heavy-Duty Volumetric Flasks
DWK Life Sciences (Kimble)Wide neck easily accommodates a 50 mL pipet Superior strength, durability and heavy uniform walls ensure safety in the lab Flat interior bottoms are ideal for stirring These KimCote® volumetric flasks are graduated to Class A volumetric tolerances and are designed from ASTM…
-
KIMAX® Heavy-Duty Wide Mouth Class A Volumetric Flasks with Glass Stoppers
DWK Life Sciences (Kimble)Clear glass with glass stoppers Pipet access is easy with wide mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars …
-
Flask Boiling Flat Bottom 250ml
DWK Life Sciences (Kimble)KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E1403, Type I, Class 4 requirements.