White, 9 x 9
-
FG Wiper, Polycellulose Nonwoven, Light Weight
FG Clean WipesThese light weight polyester cellulose wipes offer the essential benefits of a nonwoven in a versatile, economical package. Our exacting manufacturing processes enhance cleanliness for wider ranging applications. Recommended for ISO 5-8 controlled…
-
FG Wiper, Polycellulose Nonwoven
FG Clean WipesThe FG C30 Cleanroom Wiper is a nonwoven, hydro-entangled wiper made of 55% cellulose and 45% polyester. It is soft, absorbent and the material is low linting. The extractables are 0.110 for deionized water and 0.171 for isopropyl alcohol. Wiper sizes come in 4x4, 6x6, 9x9, 12x12, and 18x18 and…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
M1 Technology Sealed Border, Class 10 Polyester Knit Wipers
M1 (a Thomas Scientific Brand)M1 Technology Sealed Border, Class 10 Polyester Knit Wipers Basis Weight: (g/m2) 138 Weight Balance Thickness (mm) 0.50 Caliper Sorptive Capacity Intrinsic (mL/g) 2.88 IEST-RP-CC004.3-8.1 Extrinsic (mL/m2) 413 IEST-RP-CC004.3-8.1 Extractables (mg/g) DI Water, DIW…
-
TekniZorb™ LX Polycellulose Versatile, absorbent, and low shedding, TekniZorb™ LX offers the performance needed to restore your controlled environment to its required cleanliness. APPLICATIONS Benchtop liner Product storage solution Spill management Plenum…
-
Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…
-
NovaCel™ Wipes
Micronova ManufacturingMicronova™ NovaCel™ Wipes are an extremely absorbent PVA Wipe, holding up to 25 times it weight in water. The NovaCel wipes are firm to the touch in their dry state, but once hydrated the material becomes extremely soft and pliant. Ultra-clean quality with broad chemical resistance lend…
-
The ACL Staticide® Low Lint Wipes economical all-purpose wipes are ideal for industrial labs. Soft and strong with remarkable absorbency, these low-particle wipes hold liquid without breaking down or causing lint contamination. This non-woven material uses no binders and has lower…
-
TechniCloth wipers are fabricated from a hydroentangled, nonwoven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic wiper. With its low particle counts, low extractable levels and…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
FG Wipers, A1L Polycellulose Nonwoven
FG Clean WipesCleanroom Polycellulose Eco-Cloth 9" x 9" or 12" x 12" Packaging varies by size
-
PHARMA-SAT PLUS™ 70% IPA Sterile Polyester/Cellulose Wipers
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers that are sterile. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
VersaWipe wipers are fabricated from a hydroentangled, nonwoven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic wiper. With its low particle counts, low extractable levels and…
-
TekniMaxTM DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe APPLICATIONS Optics & Sensor Cleaning Polishing Surfaces…
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
TX8410 AlphaSat with 100% IPA incorporates ITW Texwipe's ultraclean Vectra Alpha 10 sealed-border wipers pre-wetted with 100% semiconductor-grade isopropyl alcohol (IPA) in a red, easy-to-use reclosable slider bag. This product provides prewetted wipers on demand, thereby minimizing contamination…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
9% IPA Presat Pure Polyester Wipes 9" x 9" in Pouches
FG Clean WipesFeaturing a pure, nonwoven polyester substrate and 9% IPA, these wipes deliver gentle but effective cleaning in a single package. The binder-free polyester is extremely soft and perfect for use on scratch-sensitive surfaces. The low level of IPA and high volume of DI water provide a gentle cleaning…
-
TekniMax ™ EX Knitted Microfiber Heavy-weight and durable, TekniMax™ EX utilizes a proprietary weaving pattern to create pillowed loops of sweeping power to efficiently wipe away micro-contamination from even the roughest surfaces. APPLICATIONS Best choice for…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
9" x 9" 70% IPA Presat Polypropylene Pouches
FG Clean WipesValidated sterile for the most exacting standards, these wipes feature extremely soft polypropylene and pure IPA for wiping delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping.…
-
With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …
-
Ultralow particle, sealed-border cleanroom wipers pre-wetted with IPA in one convenient package QuanSat™ with IPA incorporates ITW Texwipe's ultraclean Vectra QuanTex™ sealed-border wipers pre-wetted with various concentrations of semiconductor-grade isopropyl alcohol (IPA) in easy-to-use,…
-
Teknisat nonwoven wipes are made from a hydroentangled of 55% cellulose / 45% polyester which creates a strong, clean & absorbant wiper. Saturated with 70% Pure Isopropry Alcohol & 30% 18Mohm DI water in precise saturation level provide excellent wipe down/pick up with economy in mind. This…