White, Racks
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
White Polycarbonate Cryogenic Vial Holders
Thermo Scientific NalgeneDesigned for maximum convenience and one-handed operation Bottom of each well interlocks with base of Nalgene cryogenic vial so that vial will not turn during opening and closing For positive vial identification numbers and letters are molded into each holder's upper surface. Designed to hold…
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
Wireless Tube Racks, Half Size
Globe ScientificFully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Regular Upright Freezer Drawer Racks with 2" White Freezer Boxes
Crystal TechnologiesUpright Drawer Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/ Dividers.
-
Bottle Holders
TrippNT1781Q25 TrippNT's Single ABS Bottle Holder 500mL keeps your bottles upright and secures. It stabilizes top heavy bottles and stores one 500mL bottle. This product line has keyholes for mounting with provided hardware. 1781Q27 TrippNT's Double ABS Bottle Holder 500mL…
-
12 - 13mm, 90-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
SmoothRack Test Tube Racks
FTR EnterprisesThe next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…
-
Microcentrifuge Tube Rack, 100-Place
Globe ScientificDimensions: 263 x 109.5 x 45mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…
-
Scienceware® No-Wire™ Round Racks
SP Bel-ArtThese No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special…
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
20-Place Heavy Duty Microtube Racks
Globe ScientificAutoclavabe Reinforced polypropylene (PP) for strength and durability Rubber feet provide stability on slick surfaces Numeric markings for sample identification Compatible with both 1.5 and 2mL microtubes Dimensions (L x W x H): 209 x 71 x 35mm (8.25" x 2.75" x 1.4")
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Rack Microtube Square PP 1.5 ml
Thermo Scientific NalgeneThermo Scientific™ Nalgene Polypropylene Floating Microtube Racks are especially used in genetic cloning, microbiology and immunology labs. Offers excellent temperature resistance from -70° to +100°C (-94° to +212°F). Thaw, cool and incubate samples at elevated or reduced…
-
Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…
-
Combi-Box™ Storage Box
SimportMade of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable…
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Adapt-A-Rack®
Heathrow ScientificEach slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Test Tube Stands
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
10 & 12-Place Polypropylene Tube Racks
Globe ScientificThese traditional style test tube holders are lightweight, compact and unbreakable. They take up less space on the benchtop to provide a larger work area. They are produced from durable polypropylene (PP) and can be autoclaved at 121oC for 20 minutes.
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
Round Floating Microtube Racks
Thermo Scientific NalgeneFor incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…
-
Unwire Half-Racks For 30 mm Test Tubes
Thermo Scientific NalgeneMolded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…
-
Unwire Half-Racks For 25 mm Test Tubes
Thermo Scientific NalgeneCannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…
-
25mm, 40-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…