White, Racks
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
pH Meter Supplies Organizer
TrippNTFor organizing pH buffers, reagents, cups, pipettes, wipers, pens and calculator in the laboratory. Keeps supplies organized, clean and available Distance between shelves accommodates tall bottles Sits on bench and only 6 inch
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Fiberglass-Reinforced Peg Racks
Heathrow ScientificStrong, tough, versatile, and attractive Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Spacious peg design allows easy viewing of tube contents. User can also turn tubes upside-down and use as a drying rack! Fiberglass…
-
Scienceware® No-Wire™ Round Racks
SP Bel-ArtThese No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special…
-
Round Floating Microtube Racks
Thermo Scientific NalgeneFor incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…
-
White Polycarbonate Cryogenic Vial Holders
Thermo Scientific NalgeneDesigned for maximum convenience and one-handed operation Bottom of each well interlocks with base of Nalgene cryogenic vial so that vial will not turn during opening and closing For positive vial identification numbers and letters are molded into each holder's upper surface. Designed to hold…
-
Storage Racks
Thermo Scientific Sun SRiOpen top racks manufactured from polypropylene Open top available for 8, 12 and 15mm diameter vials Colored vial box racks with lid made from high density polypropylene
-
30mm, 24-Place Plastic Test Tube Racks
Globe ScientificPerfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Snap Together 128-Place Racks for 1.5mL and 2.0 mL Microtubes
Globe ScientificReinforced polypropylene (PP) is autoclavable Shipped flat to save shelf space and quickly assembled when needed Dimensions (L x W x H): 270 x 130 x 30 (10.6" x 5" x 1.2")
-
Regular Upright Freezer Racks with 2" White Freezer Boxes
Crystal TechnologiesUpright Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/81 Place Dividers.
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
Abdos Tube Rack
Foxx Life SciencesThese innovative Double Jumbo Test Tube Racks made of Polypropylene (PP) are used for high capacity storage for tubes, vials and Vessels. Extremely suitable for high throughput labs requiring large sample storage. Manufactured from sturdy and lightweight material suitable for easy movement and…
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…
-
Test Tube Rack Unwire™ Wht 16 mm
Thermo Scientific NalgeneFull-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…
-
SmoothRack Test Tube Racks
FTR EnterprisesThe next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…
-
Test Tube Peg Racks
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Microcentrifuge Tube Racks
United Scientific SuppliesStackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C). Autoclavable.
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
RFID Racks for CapTrack™
Globe ScientificThese RFID enabled racks specific for Captrack™ come pre-assembled with a unique RFID disk. After processing your samples with CapTrack™ these racks will allow the user to easily track their specimens to the appropriate cold storage location for fast and easy recall. These fully…
-
Combi-Box™ Storage Box
SimportMade of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Snap Racks™
J.G. FinneranSnap Racks™ are constructed of durable glass reinforced polypropylene, with a center well to conveniently hold caps, seals, septa, etc. Racks snap together securely to double your rack capacity.
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
Test Tube Rack Unwire™ Wht 13 mm
Thermo Scientific NalgeneFull-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…
-
Unwire Half-Racks For 30 mm Test Tubes
Thermo Scientific NalgeneMolded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…