Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…

Made of polypropylene The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base…

Snap Racks™ are constructed of durable glass reinforced polypropylene, with a center well to conveniently hold caps, seals, septa, etc. Racks snap together securely to double your rack capacity.

Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

Strong, tough, versatile, and attractive Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Spacious peg design allows easy viewing of tube contents. User can also turn tubes upside-down and use as a drying rack! Fiberglass…

The next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…

Durable racks for transport or sample handling. Holds either 13 and 16 mm blood collection tubes Support capped tubes up to 18 mm dia 3 x 5 format Support capped tubes up to 30 mm dia 2 x 4 format Slotted bottom Chemically-resistant epoxy-coated steel wire racks Autoclavable

Durable racks for transport or sample handling Ideal for urine containers up to 58 mm dia Slotted bottom Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

Open vials with one hand The PolarSafe workstation rack will securely hold up to 40 self-standing cryogenic vials for one handed opening and closing of caps. Product can be stored at -196°C to +121°C and can be autoclaved.

Produced from polypropylene (PP) Autoclavable Excellent rack for benchtop use or freezer storage.   Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well…

Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

These multi combination racks made of high-quality Polypropylene (PP) have a unique rotate and lock design that allows you to choose the size of the rack according to your needs. These fully autoclavable racks can withstand temperature range of -80 °C to 121°C and can accommodate tubes of various…

Dimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

The Clinical 4-Way Tube Rack is the only tube rack specifically designed to hold round, flat & conical blood collection and culture tubes. It holds multiple tube sizes without multiple racks.  

Epoxy-coated steel wire, holds six bottles in 60 mm square grids on two levels Bottom level has rails to hold the tip of the conical bottom of the bottles Dimensions are 8-3/8” x 5-1/2” x 4” (20.8 x 13.5 x 10.2 cm H) Perfect for conical and round bottom bottles that can't stand…

Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format.  One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes.  Autoclavable racks are alpha-numerically…

The chemical-resistant, HDPE-coated wire racks feature a slotted bottom and reinforced edges. These racks hold all brands and types of tubes, conical, round, flat bottom, plastic or glass. The square wells have three tiers so the tubes can fit securely in the racks. It is also Autoclavable and can…

Link together multiple racks Create as large a rack as you need by linking together multiple racks. Heavyduty polypropylene racks feature a unique system of tabs and slots, that facilitate easy connection and sturdy fit. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Rack…

Each slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…

Made of acetal polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available…

Extra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…

Great alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…

Autoclavable Durable polycarbonate Holds CryoTube vials and grips Nunc CryoTube vials with interlocking feet. Starfoot Cryotubes fit into grooves for one-handed operation.

Rack for 5.0mL microcentrifuge tubes. Holds 25 tubes. Wells are numbered for easier identification. Reusable, autoclavable and freezable (-90 C). Made of Polypropylene.

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

Cannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…

Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

Interlocking wire glove racks are made from epoxy coated steel. Wire stoppers on the racks prevent boxes from slipping out, which means these racks can be placed vertical or horizontal. Interlocking glove racks are supplied with screws, and are designed to fit most major brands of gloves. 10-1/4 x…