PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 µm filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in a reclosable slider bag, PolySat is convenient for cleaning sensitive surfaces in controlled environments.

TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…

HYPO-CHLOR® Wipes are superior saturated sodium hypochlorite wipes used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, surfaces, lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The unique and patented Asepti-Fill system assures…

TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…

Validated sterile for the most exacting standards, these wipes feature extremely soft polypropylene and pure IPA for wiping delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping.…

Micronova™ SilSat™ Wipe is a polyester wipe impregnated with a blend of medical grade silicone and IPA. Will lubricate gaskets and seals in isolators, refrigerators and cabinets in aseptic processing and support areas. Packaged 8 wipes to a pouch. Irradiated.

Residue remover and cleaner RTU wipe, 12×12 DECON-CLEAN saturated wipes are designed to remove residue left behind from disinfecting agents. Use for aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel, Lexan, polycarbonate, glass, and any critical…

TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…

MiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…

Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…

Process2Wipe saturated wipes are designed for aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, Lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The 100% continuous polyester fiber is clean and absorbent

Teknisat nonwoven wipes are made from a hydroentangled of 55% cellulose / 45% polyester which creates a strong, clean & absorbant wiper. Saturated with 70% Pure Isopropry Alcohol & 30% 18Mohm DI water in precise saturation level provide excellent wipe down/pick up with economy in mind. This…

Featuring a pure, nonwoven polyester substrate and 9% IPA, these wipes deliver gentle but effective cleaning in a single package. The binder-free polyester is extremely soft and perfect for use on scratch-sensitive surfaces. The low level of IPA and high volume of DI water provide a gentle cleaning…

TechniSat incorporates a pre-wetted fabric blend of nonwoven hydroentangled 55% cellulose and 45% polyester. This fabric combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic fiber. It offers low particle counts, low extractable levels and…

TekniZorbTM LXS Meltblown Polypropylene TekniZorbTM LXS o ers a very low-shedding wiping solution to deposit IPA while e ectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for e cient surface cleaning and sanitization between and during…

Extremely soft polypropylene and pure IPA bring wet wiping to delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping. Recommended for ISO 5-8 critical environments. Features …

TekniMaxTM DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe APPLICATIONS Optics & Sensor Cleaning Polishing Surfaces…

Sterile Presat Wiper Validated Sterile by Gamma Irradiation Nonwoven Polyester Fabric 9"x9" Double Bagged

PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 ë_m filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in resealable flexpacks or flip-top tubs, PolySat is convenient for cleaning sensitive surfaces in controlled environments. …

Sterile Hypo-Chlor 0.25% Saturated Wipe, residue remover and decontamination wipe. Provide adequate ventilation. Avoid inhalation of vapors/mist and contact with skin and eyes. Wear appropriate personal protective equipment. Handle and open container with care. Change contaminated clothing. Wash…

Sterile SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with a high saturation level of 70% IPA and 30% DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk…

TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…

TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…

With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …

The STERI-PEROX Wipe is a superior saturated Hydrogen Peroxide wipe used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The unique and patented Asepti-Fill system…

SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with various saturation levels of isopropyl alcohol and DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk handling…