Pre-assembled packs come ready-to-use with cap and septum of your choice attached to the vial. A time/labor-saving product for use on your Agilent Autosampler or any rotating tray automatic sampler. Agilent Technologies products are intended for sale/shipment within the US only. International…

4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for…

11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Screw tops 30 µL reservoir Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Screw Top Convenience Packs are an easy way to get 500 of each component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, 500 screw top vials and screw caps with septa installed are kept handy and dust-free. Agilent Technologies products are intended for…

These inserts are an economical limited volume solution. Manufactured with tight tolerances for a custom fit. The insert has an extremely flat bottom without any push-up to protect syringe needles. Agilent Technologies products are intended for sale/shipment within the US only.…

Uniformly flat bottom ensures compatibility with inserts 2 mL, 12 x 32 mm Use with any 11 mm snap or crimp cap 40% larger opening than the standard narrow opening vials Easy way to seal vials without crimping. A consistently secure seal outperforms the loose fit of other snap…

The Agilent Technologies accessory is used in GC (gas chromatography) equipment, which is used in analytical chemistry experiments to determine chemical components from sample mixture. This accessory assures smooth and reliable performance of the GC instrument. This product is only available to…

11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Caps are ready to use with any headspace crimp top vials. Caps with safety feature release pressure at approximately 45 psi. Septa are sold separately. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their…

For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

The chemically inert, patented process produces a true bond at the molecular level of the septa and plastic cap, eliminating excess evaporation and providing a proper seal with the vial. Septa are completely secure and will not fall into the vial during injection. These caps are made with…

8-425 Screw Caps without Septa (2714S28) Open top polypropylene screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) …

Conical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…

Agilent provides a wide variety of micro and 2 ml vials and caps compatible with the Combi Pal and GC Pal listed in the Vials and Caps section. Below are the most popular vials and caps. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

8-425 thread design Original, narrow neck size Uniformly flat bottoms ensure compatibility with inserts Vials are available with black caps and a variety of septa to meet your application needs. 2 mL 8-425 screw top glass vials (2714S22, S23, S61) Vials accommodate a…

Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide a consistently secure seal. Flat-bottom headspace crimp top glass vials…

Crimp top 1.5 mL capacity Wide opening 1.5 mL wide opening crimp top high recovery vials have a 30 µL reservoir. High recovery glass vials are for sample concentration and injection without transferring to microvolume inserts. Agilent Technologies products are intended…

Polypropylene (PP) screw caps without septa are an economical choice. Use the caps and replace septa as needed. Choose from three cap colors for separating assays, lots, standards, etc. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

12 x 32 mm, Type 1 borosilicate glass Compatible with standard crimp closures 1.5 mL total volume Less than 5 µL dead volume Micro-V vials are compatible with standard crimp closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. They are…

Prevent unknown peaks impacting your results Save time and increase productivity with the first family of vials and closures to certify true LC/MS & GC/MS lot-specific testing results in a single package. All MS Analyzed Vial Kits are: Shipped with lot-specific Certificate of Analysis…

This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place…

Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume.  Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of…

Agilent provides all the CE filters and frits needed to ensure each application can be run with highest performance. All parts are manufactured to Agilent's high quality standards and have been tested for best performance in Agilent instruments. This product is only available to U.S. Domestic…

20mm Headspace Crimp Caps without Septa (2715F74, F77) For use with all headspace crimp top vials. Caps with safety feature release at approximately 45 psi. 20mm Headspace Crimp Caps with Septa (2714S39 to S42) Pre-assembled 20mm crimp caps with septa. Ready-to-use with any headspace crimp…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Crimp Top Vial Convenience Packs are an easy way to get 500 of each vial component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, all items are kept handy and dust-free. Agilent Technologies products are intended for sale/shipment within the US only.…

Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …

Agilent provides a range of high quality, sample and storage vials for a variety of samples and applications. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders…