11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Allows transmittance measurements of solid samples at various incident angles. The sample can be positioned through 360 degrees to the incident beam and is selectable to 1 degree. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is…

Conical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Borosilicate glass 1.5 mL volume 12 x 32 mm Compatible with snap or crimp closures Designed for center needle during sample injection Not recommended for Vortex or in-vial sample concentration Agilent Technologies products are intended for sale/shipment within the…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

PUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for…

Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections. Agilent…

Quartz, round aperture 3mm diameter, M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For…

When you’re analyzing cannabis and hemp products, success depends upon the quality of your cannabinoid reference materials. Agilent potency testing standards are rigorously tested and manufactured using ISO 17025 and 17034 accreditations. They enable you to: Save time and money by…

In recent years, quality requirements as outlined by ISO 9000, GLP, GMP and NAMAS have assumed increasing importance. As a consequence, the recommendations of pharmacopoeias have become more influential in the pharmaceutical industry. Formal performance verification of UV-Visible spectrophotometers…

Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling. …

Agilent offers a range of cell holders, providing you with the ability to analyze a wide variety of samples. Standard, cylindrical, long pathlength, and variable pathlength cell holders, bases and test tube holders are all available for Agilent UV-Vis and UV-Vis-NIR systems. Application: For…

The Agilent Technologies holmium oxide/didymium glass filter kit is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be…

20 mL flat bottom One-piece crimp caps with safety feature Choose either molded PTFE/Butyl Septa for applications <120°C or molded PTFE/Silicone Septa for applications >125°C. This product is only available to U.S. Domestic Customers. Agilent Technologies…

For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. A number of different autosamplers have been used with Agilent AA,…

Agilent UV-Visible calibration standards and kits provide an inexpensive and time-saving solution for calibrating and qualifying your UV-Vis instrumentation. The reference material kits were developed for analysts who need to conform closely to both quality and regulatory requirements when…

Crimp Top Vial Convenience Packs are an easy way to get 500 of each vial component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, all items are kept handy and dust-free. Agilent Technologies products are intended for sale/shipment within the US only.…

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, z height 20mm. Compatible with Agilent Cary 100/300 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies accessory is used in HPLC (high-performance liquid chromatography) system, which is mainly used in biochemistry and analytical chemistry experiments to separate individual components from the mixture. This product is only available to U.S. Domestic Customers. For…

4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact…

The Agilent Technologies plate hose adaptor is suitable for use with cary extended sample compartment. Application: For Cary Extended Sample Compartment This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Rectangular fluorescence cell, quartz, anaerobic, 10 mm pathlength, 3.5mL, 1/pk. Includes inlet tubing and a reservoir (1.5mL) joined to the cell using a ground glass joint, for collecting excess gas produced by anaerobic experiments. Evacuation tube is 4 mm ID, 6 mm OD and 30 mm long. Compatible…

Agilent provides all the CE filters and frits needed to ensure each application can be run with highest performance. All parts are manufactured to Agilent's high quality standards and have been tested for best performance in Agilent instruments. This product is only available to U.S. Domestic…

Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume.  Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies temperature probe holder is suitable for use in rectangular micro-cells. Application: For Use in Rectangular Micro-Cells This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Matched pair, open top with PTFE lid supplied, Suits all Agilent UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.