Thermal Cycler 0.2 mL Tubes feature attached caps for convenient one-handed use. Slender shape distributes uniform heat. Polypropylene tubes are EtO sterilized. Microcentrifuge 0.5 mL Tubes have a frosted writing area and reliable snap cap. Made of autoclavable polypropylene, these…

These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

High Quality Borosilicate test tubes with rims.

Applications: Lysing Matrix C is used primarily for lysis of yeast and fungi and can also be used for molds, spores and filamentous algae. Product Overview: Contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in the FastRNA Pro Red Kit and FastProtein Red…

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000…

The straight-style drying tubes have a small stem which is approximately 6mm in diameter, a body that is approximately 14mm in diameter, and a bulb is 26mm in diameter. They are available in three lengths. The U-shaped style drying tubes have a tube that is 14mm in diameter and are available…

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP). The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE)…

The top graduation line on unmatched Kimble Nessler Color Comparison Tubes may be any distance from the outside bottom within the range of scale lengths shown in individual descriptions. In matched sets, the top graduation lines of all the tubes in a set will be within the very close limits…

These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel 45310A series is supplied in matched sets of 6 Graduated ring scale of any of the six tubes will not vary by more than 3…

Safety Caps   Color-coded; helps prevent cross-contamination and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer®  after the original rubber stopper is removed Cap…

For trace metal analysis Inert, non-contaminating Low metal ion content Teflon ® PFA resin Transparent tubes can withstand temperatures up to 500°F (260°C). Tubes do not include caps.

Autoclavable Non-scratching Tapered sides permit nesting Baskets are ideal for applications such as sterilization, incubation and storage. Molded, one-piece design has a mesh opening of 9.5 mm.

Precision molded Virgin thermoplastic Chemically clean Made of either polystyrene or polypropylene, these tubes are ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. No mold release agents are used that could cause errors and interferences in RIA…

Ace Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breaking…

Borosilicate Glass. Available with and without base. With and without graduations.

Foam plugs for all size test tubes and laboratory flasks Identi-Plugs® are for use with test tubes and flasks. They are reusable and leave no clinging fibers like cotton plugs. They provide a snug fit, yet permit free air flow. Plugs are ideal for use with Drosophila vials. They spring…

These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

Lysing Matrix B 2 mL tubes have blue caps and contain 0.1 mm silica spheres. Used primarily for lysis of gram positive and negative bacteria. Will also disrupt fungal tissue and spores. For use on FastPrep instruments or any bead-beating device.

Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

Our borosilicate glass gas measuring tubes have permanent, white graduations, subdivided by 0.1ml. We offer tubes of varying capacities. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including arsenic and lead, which are known to the State of California to…

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000…

The Glass Double Thistle Tube has funnel opening on both ends, 7mm OD stem and is 300mm in length.

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000…

This 13 x 100mm polystyrene test tube has a capacity of 7ml. Tube features a round bottom and includes a hollow top plug cap made of polypropylene. Sold as a pack of 100 tubes.

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

15mL test tubes with blue quick closure screw caps (PE), leakproof, and suitable for centrifugation. The design of the cap avoids any contamination due to drops of liquid on the inner surface. Case of 100.

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes