Flask Plugs

Compare Tool

Select up to 3 products

Flask Plugs
1 - 32 of 94
Sort
View
Show
  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce (a Thomas Scientific Brand)

    …than conventional glass filtration assemblies, labForce’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded bottle. Simply plug the filter onto your vacuum line, and begin filtering your solvent without any complex setup. The FDA-grade Polypropylene housing provides vastly…

  • Identi-Plugs®

    Jaece

    Foam plugs for all size test tubes and laboratory flasks Identi-Plugs® are for use with test tubes and flasks. They are reusable and leave no clinging fibers like cotton plugs. They provide a snug fit, yet permit free air flow. Plugs are ideal for use with Drosophila vials. They spring…

  • Mity Plugs

    Jaece

    Cellulose Acetate plugs for all size test tubes and laboratory flasks. MITY Plugs are non-shedding, dense weave cellulose acetate E plugs for drosophila vials and bottles. Dense weaving offers a superior barrier to mite infestation. Allows for reduced food evaporation to keep food fresh…

  • Polycarbonate Erlenmeyer Flasks

    Corning

    …non-pyrogenic Non-baffled bottoms Certified RNase- and DNase-free Designed for use as culture flasks or storage vessels and are ideal for shaker culture applications. The polypropylene plug seal caps offer two positions, open for gas exchange or closed for tight liquid seal.  Vent…

  • Silicone Sponge Closures

    Bellco Glass

    …25-50ml Erlenmeyer Flasks, 125-300ml Erlenmeyer Flasks, 500-1000ml Erlenmeyer Flasks, 25-125ml DeLong Flasks and 250-6000ml DeLong Flasks. Sealed-in Silicone Sponge filters are the ideal for aerobic cultures. They cut losses due to evaporation in half in comparison to cotton plugs, thus minimizing…

  • Sleeve Stoppers & Plugs

    Plasticoid

    Hollow plug to fit inside bottles, flasks, vials, or tubing with a sleeve to pull over neck to create a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on…

  • Erlenmeyer and Fernbach Flasks

    Celltreat Scientific

    …ratio NEW – Unique 2L Fernbach now available Available with plain or baffled bottom All Erlenmeyer and Fernbach flasks are individually bagged and supplied sterile (gamma irradiated) NEW – Non-treated Suspension Culture Flask now available in 850mL size with Plug Seal C

  • Rotavapor® R-300 Rotary Evaporators

    Buchi

    flask and vapor duct removal thanks to easy to use Combi-Clip User-friendly operation due to ergonomic electric or manual lift Immediate adjustment of heating temperature and rotation speed with intuitively positioned control knobs Extendable and versatile Easy plug &…

  • Diamond Culture Tube Caps

    Globe Scientific

    … Autoclavable Ridges inside cap provide secure grip and gas exchange Available in five sizes and five colors Maintain sterility without cotton plugging Reduce sample evaporation compared to cotton plugging Provide same evaporation and sterility benefits as stainless steel closures

  • Stopper 22

    Corning

    …have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental tipping. These stoppers may be used in place of the conventional glass Standard Taper flask stoppers.

  • Equilibration Flask

    Ace Glass

    …the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is transferred to sample tube 7410. Unit consists of PTFE plug with FETFE O-Ring and glass vessel with 25mL bulb at bottom.

  • Vacuum Pump V-300

    Buchi

    …with Interface I-300 / I-300 Pro when combined with optional level sensor for secondary condenser that alerts potential overflow of the receiving flask Reliable High chemical resistance due to the use of high quality materials Increased lifetime thanks to speed-controlled…

  • Shake Flasks

    DWK Life Sciences (Wheaton)

    …aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A…

  • Suspension Culture Flasks

    Celltreat Scientific

    …the products. Suspension culture flasks are non-treated. Surfaces are flat and free from striation to provide improved transparency. Flasks are available in four different sizes; 25ml (12.5cm 2 ), 50ml (25cm 2 ), 250ml (75cm 2 ) and 600ml (182cm 2 ). Flasks are provided with vent caps that…

  • Polycarbonate Baffled Erlenmeyer Flasks

    Corning

    …Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps for applications requiring sterile gas exchange. Models with two-position polypropylene plug seal cap can be opened for gas exchange or closed for a liquid-tight seal. Flasks are sterile,…

  • Flask, Separatory Funnel Type, 1:5 PTFE Plug, Standard Wall

    Ace Glass

    With three necks and PTFE plug (5mm bore on 5000mL, 4mm bore on all other sizes) stopcock outlet. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. For stopcock plugs, see 8224. For heating mantle, see 12039

  • Tissue Culture Flasks

    Celltreat Scientific

    …Culture Flask now available with plug seal cap (Part No. 229360) Thomas No. 1177Y88 and 1177Y89 NEW – 300cm2 Tissue Culture Flask now available with plug seal cap (Part No. 229360) Available in 7 sizes: 12.5, 25, 75, 182, 225, 300 and NEW 182cm2 Deep Volume Flask

  • NMR Stoppers

    Plasticoid

    Hollow plug to fit inside bottles, flasks, vials, or tubing with a sleeve to pull over neck to create a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on…

  • BD Falcon Tissue Culture Flasks, Canted Neck, 250 mL

    BD

    …stability provided by a unique horizontal skirt and wide base. Have full scale increments on two sides, integrated writing surface, built-in horizontal stacking ribs and neck support. 9381M06 Flask has a black phenolic screw cap; 9381M08 Flask has a blue plug seal cap. Packaged in sleeves of five.

  • Instatherm Flask, High Temp Type, Two Necks

    Ace Glass

    …neck and angled standard taper reinforced outer side neck. Three-prong connector plug is designed to work with Ace temperature controllers where the output voltage can be automatically limited to match flask. Flask can also be matched with ACE temperature thermocouple sensors for complete automatic…

  • Cell Culture Flasks

    Eppendorf

    …key requirements in developing the Eppendorf Cell Culture Flasks. A new, high efficiency air filter technology combines excellent protection with reliable gas exchange. In-line pressure testing for each flask guarantees leakage-free flasks for maximum workflow safety. The unique ConvexAccess™…

  • Falcon® Tissue Culture Flasks, Vented

    Corning

    Sterile Flask of optically clear polystyrene, tissue culture treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas…

  • HDPE Stopper No 22

    Corning

    …have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental tipping. These stoppers may be used in place of the conventional glass Standard Taper flask stoppers.

  • Scienceware® Lab-Aire® II Electric Benchtop Glassware Drying Racks

    Bel-Art Products

    …be redirected to only the pegs in use by replacing the unused pegs with plugs (6 plugs included). Select from single and double-sided models with up to 76 peg locations to hold glass or plastic labware such as beakers, flasks, bottles, test tubes and cylinders. Two removable polyprobylene baskets…

  • KIMAX Graduated Filtering Flasks with Detachable Plastic Sidearms

    DWK Life Sciences (Kimble)

    …for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a cotton plug securely All flasks have durable white ceramic enamel scales to indicate approximate volumes at various levels Designed from ASTM Specification…

  • Hyperflask Cell Culture Flask

    Corning

    …into your cell culture automation, respectively. Bar coding makes flask compatible for use on Cell Culture Automation Platforms. Constructed of high-density polyethylene, features include gamma sterilization and a plug seal cap on a straight neck designed for filling with growth medium.

  • Instatherm Reaction Flask and Head

    Ace Glass

    …methods and eliminates cumbersome and dangerous oil baths. Response is rapid and accurate. Supplied with silicone coating for insulation and protection. Contacts are standard banana plugs. Use with 9698-16 connecting cord. CAPFE O-ring supplied with flask. Flask coated within approx. 38mm of flange.

  • Cell Culture Flasks

    Biologix

    Made of high quality medical grade polystyrene Available flask sizes include surface areas of 25 cm 2 , 75 cm 2 , or 175 cm 2 Plug cap and filter cap options available for all flask sizes Plug caps completely isolate the culture from the outside environment Filter caps prevent…

  • 225 cm Cell Culture Flasks

    Corning

    …are treated for optimal cell attachment. Rectangular flasks have a ramp from the bottom to the canted neck for easy pouring and pipette access. Most canted neck flasks also have an anti-tip skirt for increased stability. Angled neck flasks utilize the entire bottom area for cell growth. This…

  • Wash Bottles with Integrated Spout, LDPE

    Globe Scientific

    …tilt the bottle. The wide base provides stability when filling. In addition to the screw cap, a plastic plug insert comes with each bottle, providing additional leak-resistance. Simply insert the plug into the mouth of the bottle prior to closing the lid. This ensures a leak-resistant seal and makes…

  • Airless-Ware Kjeldahl Schlenk Flasks

    DWK Life Sciences (Kimble)

    …ease of liquid and solid transfer The bottom of the flask is shaped to fit Kontes oil spherical heating mantles. Standard Taper joint size for Thomas numbers 4955L93 through M04 flasks is 14/20; for 4955M05 through M10 flasks; 24/40. Supplied with a glass plug and a pressure/vacuum retainer.

  • Wide Mouth, Square (Rigid) PE Bottles

    Globe Scientific

    …the bottles to be tightly and neatly packaged side by side. In addition to the screw cap, a plastic plug stopper comes with each bottle, providing additional leak-resistance. Simply insert the plug stopper into the mouth of the bottle prior to closing the lid. This ensures a leak-resistant seal and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.