Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately

Clear Screw Thread Vials offer maximum visibility. These general purpose glass Vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. These Vials are fully assembled and ready for your own cleaning procedure. Ready to Clean vials are…

Vials and Phenolic Caps with White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures, unattached Closures supplied with PTFE-faced / white rubber liners

Trust our low-level certified vials for Total Organic Carbon testing and sampling. Manufactured, tested and packaged by exacting standards, Thermo Scientific™ TOC Certified Containers are certified to contribute <10ppb or < 20ppb TOC as background. Containers: Available…

Fitted with rubber liners Borosilicate glass, Wheaton “200” glass Consists of screw neck vials and attached 2386Q20 series cap fitted with rubber liners Packaged in Wheaton Lab File® carton containing two pull-out cardboard drawers. Listings show height x diameter.

Application EPA vials has been used during solid phase microextraction (SPME) of odors in drinking water for analysis by GC/MS. General description Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows: 1. Wash containers in hot water using…

Microscale, heavy wall reaction vial with standard taper outer joint externally threaded at opening to allow an o-ring cap seal connection with mating male joints. This connection type eliminates the need for clamps while offering the positive, leak-tight seal of ground glass joints. Vials include…

Thickness of the glass surrounding bottom of cone magnifies liquid contents to facilitate sample withdrawal Self-standing with flat-bottom exterior Ungraduated, with open-top closure and PTFE-faced silicone septum Vials are made of KG-33 borosilicate glass, which meets USP Type I or…

Amber Screw Thread Vials offer protection from harmful light and UV rays for light sensitive products. These general purpose glass vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Purchase closures separately.

Vials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from clear KG-33, borosilicate glass Closed top black phenolic closures attached Choice of PTFE-faced / white rubber liner or white rubber liner Vials are packaged in corrugated trays with partitions Small case quantities

Clear Screw Thread Vials offer maximum visibility. These general purpose glass Vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Attached black phenolic (thermoset) caps with pulp/vinyl liners are perfect for general use. The liner…

Manufactured from polypropylene 300 µL conical interior reduces sample size Available with snap/crimp or screw top finish 100 vials per shelf pack/1000 vials per case ABC screw top requires 9mm closure Screw top requires 8-425 closure Snap/Crimp top requires 11mm closure

Contaminants such as loose dirt, carton lint, aerosols, and fine glass particles are removed by the Vacuum and Ionization process. V & I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust particles. Next, the air…

Thermo Scientific* Dust Covers are designed to fit all standard size VOA vial caps. Thermo Scientific accessories complement the full range of environmental sampling containers.

Made of clear glass, Our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged in attractive,…

Polypropylene (PP) sample vials with low-density polyethylene (LDPE) snap-on caps.

Our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged in attractive, white low-particulate…

Vials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures attached Closures with PTFE-faced / white rubber liners or white rubber liners Vials packaged in corrugated trays with partitions

PTFE-faced butyl septum was used in sealing headspace vials to analyse the sampling efficiency and breakthrough of methyl bromide on activated charcoal using GC. It was also used for sealing water samples during headspace analysis with GC-FID, in a study which demonstrates cross-validation of…

Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. Amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements…

Clear or amber Teflon®-faced Screw thread cap Teflon®-faced silicone lined open top vials are suitable for use in water sampling according to EPA 40 CFR 136, “Guidelines for Establishing test Procedures for the Analysis of Pollutants.” The open-top screw cap has a specially…

Available with caps attached or no caps Low profile for greater stability Available with rubber lined caps or Teflon faced rubber lined caps Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely inert and…

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

Highly break resistant tough polycarbonate vials with polypropylene leakproof closures. Glass clear allows viewing of valuable contents, liquid or solid. Reusable and autoclavable. 5mL and 10mL are also ideal for leakproof shipping of reagents and buffer solutions, for packaging of serum,…

The 4 mL vial can be used with the Waters 48-Position autosampler.

Shell vial of N-51A borosilicate glass Plain top Open bottom TITESEAL® closure (not attached) 0.5 dram vial measures 12 mm o.d. x 35 mm length. 1 dram vial measures 15 mm o.d. x 45 mm length. (1 dram = 3.7 mL ).

Lab grade polypropylene Hinged Vials are sterile, leak-proof and airtight. The containers are manufactured in FDA approved Class 10,00 and Class 100,000 clean rooms. The containers are sterile by process and for most applications do not require a second means of sterilization. The containers are…

Dry swabs can be used for preserving and stabilizing nucleic acids for molecular diagnosis and also for assessing microbial presence on various surfaces and equipment.

Manufactured from amber 203 borosilicate glass Closures not included