Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

Type I borosilicate glass Clear or amber Accept a variety of seals The Snap Seal™ Vial can be securely sealed with the Poly Crimp™ Seal, an aluminum crimp seal or a variety of Snap Top Cap™ designs.  The unique design provides for a secure seal with any…

Recommended for discrete water sampling under EPA 40 CFR 136 "Guidelines for Establishing Test Procedures for the Analysis of Pollutants" and EPA 40 CFR 141 "National Interim Primary DrinkingWater Regulations: Control of Trihalomethanes in DrinkingWater"

Trust our low-level certified vials for Total Organic Carbon testing and sampling. Manufactured, tested and packaged by exacting standards, Thermo Scientific™ TOC Certified Containers are certified to contribute <10ppb or < 20ppb TOC as background. Containers: Available…

Made of amber glass, our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged in attractive,…

Sample vials with PTFE-lined storage caps Available in clear or amber glass Each carton contains shrink-wrapped vials and PTFE-lined caps in plastic bags

Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

For use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…

Tear-Off, Tear-Out, or Flip Cap

11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

EPA Certified TOC Vials

These shell vials are ideal for chromatography applications. White polyethylene plug style needle closures, unattached Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Fitted with rubber liners Borosilicate glass, Wheaton “200” glass Consists of screw neck vials and attached 2386Q20 series cap fitted with rubber liners Packaged in Wheaton Lab File® carton containing two pull-out cardboard drawers. Listings show height x diameter.

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. Clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that…

Each Convenience Pack includes 100 vials and 100 aluminum seals Choice of three liners

The Finneran Interlocked™ Vial is composed of a 12x32 glass vial and a clear glass limited volume insert fused together. This design eliminates movement of the insert, allows more consistent sample recovery, eliminates needle damage and concerns about contaminants around the fused seam/space…

Neck finish allows use of Snap Top Caps™, patented Poly Crimp™ Seals or standard aluminum seals. Snap Ring™ finish eliminates the need for crimping or decapping. Designed to work in Agilent and other autosamplers. Choose from clear or amber Type I borosilicate glass. ID design incorporates the…

Flint glass, with slight shoulder Tight-fitting polyethylene cap, with thumb tab, can be removed and applied easily with same hand in which vial is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays that can be pulled out as drawers.

Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

Short-style shell vials are ideal for storing dry products. Plain top design Lab pack quantities Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Conical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…

Amber Screw Thread Vials offer protection from harmful light and UV rays for light sensitive products. These general purpose glass vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Thermoset (phenolic) hole caps provide the widest…

The Environmental Sampling Supply sample vial with septa, is suitable for use in research facilities and chemical laboratories. It is made of sturdy borosilicate glass material which ensures long lasting usage.

20mL glass scintillation vials without caps. Vials are packaged in cellular trays which have alphanumeric coordinates for fast, easy identification. Each cellular tray contains 100 vials and has alphanumeric coordinates for fast, easy identification Five trays per case, shrink-wrapped to…

Vials, with caps attached Packaged in cellular trays having alpha numeric coordinates for fast, easy identification Each tray contains 100 vials, five trays per case

Clear Screw Thread Vials offer maximum visibility. These general purpose glass Vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Attached black phenolic (thermoset) caps with pulp/vinyl liners are perfect for general use. The liner…

Borosilicate glass 1.5 mL volume 12 x 32 mm Compatible with snap or crimp closures Designed for center needle during sample injection Not recommended for Vortex or in-vial sample concentration Agilent Technologies products are intended for sale/shipment within the…

Clear glass vials with 18 mm screw thread finish are designed for consistent use in magnetized autosamplers. 18 mm screw thread finish offers superior sealing characteristics Designed for use with thinner septa; ensures a consistently flat surface is available for the magnet Round…

Vials with vinylite liners Consisting of 9710F12 series borosilicate glass vials and attached 2386C10 series caps fitted with cork-backed vinylite liners Vials with Caps (9710D13 to D73, 1233Z28 to Z37) Vials without Caps (9710F12 to F82, 9711B45)

Manufactured from clear and amber Type I borosilicate glass Designed primarily for use in the Waters WISP 48-position and other autosamplers Packaged in shrink-wrapped trays of 100 for convenience and cleanliness