Vial Septum

Compare Tool

Select up to 3 products

Vial Septum
1 - 32 of 90
Sort
View
Show
  • Open Top Sample Vials In Lab File

    DWK Life Sciences (Wheaton)

    …standards. Amber vials are manufactured from Wheaton 320 amber glass that meets ASTM Type 1 Class B and USP Type 1 standards to protect light sensitive samples and maintain purity of contents. The white polypropylene open top screw cap has a specially designed septum of 5 mils of Teflon…

  • High-quality borosilicate glass and rigid, autoclavable cap Standard open top, flat silicone/ PTFE septum design 40 mL capacity Available in clear or amber Vials are available assembled only or pre-cleaned to EPA protocol B. Independent laboratory certified version is also…

  • Vials

    I-Chem

    … Choice of open-top cap, PTFE/silicone septum or closed-top, PTFE-lined cap Amber glass is recommended for UV-light sensitive samples. Vials 9711J04 through J09 come with a Septa-Gard™ polyethylene friction-fit snap cover that fits over the vial to provide additional protection against…

  • Available in clear or amber borosilicate glass. Choice of .125" or .100" PTFE/Silicone Septa. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing…

  • Clear borosilicate glass vial available in 20mL or 40mL sizes Septa permanently bonded to the cap Clean Snap closure features a fully integrated, snap-off septum guard that protects the septum from chemical and particulate contamination during handling and storage Standard cap…

  • Available in clear or amber borosilicate glass Choice of 0.125” or 0.100” PTFE/Silicone Septa Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol CLASS 1: (Standard) Containers are assembled with liner and closure without…

  • Extremely clean, natural-colored PTFE laminated to clear Silicone.

  • …Size, Particle/mL/Vial Mass Spec Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our sealed and re-closeable container includes: 100 - Certified 2.0mL screw thread vials 100 - 9mm royal blue closures with…

  • LC Certified Vial Kits

    J.G. Finneran

    …Residue LC Certified Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our sealed and re-closeable container includes: 100 - Certified 2.0mL screw thread vials 100 - 9mm royal blue…

  • Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10…

  • Headspace Vials

    National Scientific

    … Round bottom vials are more easily handled by robotic arms that lift the vial from the tray Round bottom vials distribute the internal pressure created at high temperatures across the glass surface Beveled edge finish features a sturdy rim that presses into the septum for a more effective…

  • Available in clear or amber borosilicate glass. Choice of .125" or .100" PTFE/Silicone Septa. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing…

  • National SureStop* Vial Kits

    National Scientific

    …of user, or the amount of torque applied when closing vial Provides optimal septum compression across the opening of the vial Design allows the positioning of the closure to be consistently “flat” producing a more cylindrical vial profile, which improves autosampler recognition and…

  • 8-425 Screw Caps with Septa

    Agilent Technologies

    …recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) Open top screw caps with the 8 mm septa installed. Septa for 8-425 Screw Caps (2714S26, 2714S27,…

  • Magnetic Screw Thread Headspace Vial Caps

    DWK Life Sciences (Kimble)

    Designed to fit 18 mm screw thread headspace vials. 1184G07 (73880-18) is silver with red PTFE/white silicone press fit septum 1184G08 (73885-18) is silver with red PTFE/gray press fit butyl rubber septum

  • Material PTFE/silicone septum (bonded to cap) Blue polypropylene cap Clear glass vial Feature Closure type blue polypropylene hole cap Closure type screw top vial Packaging Pkg of 100 ea O.D. × H × I.D. …

  • …exterior of each case is labeled with a lot number. Each case contains a "Certificate of Analysis". An independent laboratory is used to certify the container's cleanliness, assuring impartial results. Finneran 40mL Clear VOA Vial now available with graduations - 5mL increments

  • Marathon Septa

    Chromatography Research Supplies

    High-performance GC Septa for autosampler use Outstanding lifetime Very low bleed Maximum temperature of 350°C Septum typically achieves 400 injections without failure when used with HP-style needles and autosampler needle guide. Soft, 45 Durometer, septa are easy on…

  • Clear borosilicate glass with 0.060 in. Thin Septa 40 mL clear septa vials feature a thin (0.060”) PTFE/silicone septa. The septum is easy to puncture with syringe needles and is ultrasonically bonded to the 24-414 polypropylene closure. No adhesive is used. I-CHEM Certified®…

  • 11mm Snap Top Caps™

    J.G. Finneran

    …application where CTC Analytics PAL® instruments must transport the vial to another location using the magnets found on these instruments. Thomas no.: 1167F43 The 11mm Snap Cap with an integral molded polyethylene septum area is now available pre-slit in order to offer a penetration aid…

  • Snaps on any crimp-style vial Save money! Use this snap cap when you don’t need to crimp

  • Autosampler Silicone/PTFE Septum with Cross Cut for 11mm vials, Pkg 500

  • …silicone/ PTFE septum design 60mL Capacity Clear color Vials are available with graduation line ? High-quality borosilicate glass and rigid, autoclavable cap. Standard open top, flat silicone/ PTFE septum design. 40 mL capacity. Available in clear. Vials are available with…

  • Material: PTFE/silicone septum, aluminum seal, clear glass vial Description: unassembled Packaging: pkg of 100 ea O.D. × H × I.D.: 12 mm × 32 mm × 6.0 mm Size: 2 mL Volume: 2 mL Fitting: for 11 mm crimp

  • …autosamplers. Headspace vials meet or exceed OEM specifications. Flat top vials have traditional flat finish on top and bottom to maximize heating efficiency. The beveled edge finish features a sturdy rim that presses into the septum for a more effective seal. Round bottom vials distribute the…

  • VOA Vials

    C & G Container

    VOA Vials are most commonly used for Volatile Organic Compound Analysis. These Vials are Type 1 Borosilicate glass available in Clear and Amber. Vials come with a choice of 1pc 24-414 white cap and sonically bonded septum.

  • …a membrane filter, autosampler vial, septum, and plunger into a single device to provide efficient sample filtration for Ultra High Performance Liquid Chromatography (UHPLC)/High Performance Liquid Chromatography (HPLC) analysis. Mini-UniPrep G2 autosampler vials Once compressed, Mini-Uniprep…

  • …and forcing the plunger into the vial. Alternatively, use of a hand compressor allows for pressure to be spread over the palm of the hand to reduce fatigue over multiple samples. Mini-UniPrep syringeless filters By combining a syringe filter, vial, cap, septum, and plunger into a single device,…

  • Caps

    TriForest

    …culture. Septum Cap Serves as closure for flasks and media bottles. This cap comes in standard blue polypropelene with gray butyl rubber. Ideal for injectibles, especially pathogenic media. DuoSeptum Cap This cap is an ingenious combination of our TriForest septum Cap and vented…

  • 1.5mL Vial and Cap for Dionex® AS50

    Environmental Express

    1.5mL Polypropylene vial with septum cap for Dionex AS-50 and AS-AP Autosampler. The septum is slit for easy penetration The septum is a laminate of blue PTFE on the bottom and white silcone on the top

  • Mininert valves are very convenient for repetitive sampling and limit content exposure to the silicon septum. Models are available for screw-cap and crimp-top vials. The crimp-top valve for 20 mm ID glassware slides into the neck of the vial. Turn the threaded flange to secure a tight fit.

  • Pre-assembled packs come ready-to-use with cap and septum of your choice attached to the vial. A time/labor-saving product for use on your Agilent Autosampler or any rotating tray automatic sampler.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.