Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…

High visibility, red color helps to alert user of hazardous contents. Low density, polyethylene with polypropylene closure. 

Autoclavable at 121°C Polypropylene 500mL bottle fitted with one-piece PP closure (34mm neck ID) Closure features precision jet-tip aperture for fine control Dimensions 163mm height x 75mm diameter

Wide-Mouth; Eliminates Dangerous Drips A unique, 2-piece valve prevents pressure build-up of solvents within these Right-to-Know Safety-Labeled Wash Bottles. Volatiles are vented eliminating solvent drips. They are pre-printed with the Chemical name and formula, the National Fire Protection…

Azlon’s new high quality wash bottles are supplied complete with unique, write on - wipe off labeling areas. Easy to reuse, time and time again, they are specially designed for full traceability and to meet stringent labeling requirements.  The bottle has been designed with a series…

These stylish sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water…

Electro-pneumatically operated TLC sprayer provides: Minimum reagent consumption due to homogenous spray performance Two different spray heads optimized for both low- and high-viscosity solutions Ready-to-use spray solutions fit directly onto the sprayer

The 250ml and 500ml natural wash bottles have a integrally molded tube with removable jet tip and a separate  plain cap. The shape is a squared-oval for easy grip and improved stability. Available with natural PP  closures. Can also be supplied with the tube end sealed  for…

Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…

These stylish sloped shoulder wash bottles are supplied with a white or red cap. All are fitted with color coded polypropylene swivel/leak proof closures featuring an acute angled "swan neck" dispensing spout.

These bottles are made of translucent and low density polyethylene (LDPE). Solutions can be dispensed easily by lightly squeezing the bottle. The flexible polyethylene delivery tube can be directed wherever required.

Bottles made from LDPE (or PP for Acetone), with PP wash tube. A colored VENT-CAP allows easy visual identification. Media name in English, Spanish, French and German chemical formula, CAS No, hazard pictogram, signal word Risk Phrases (H phrases), safety phrases (P phrases), as well…

Set of four 500ml LDPE bottles are translucent and manufactured from low density polyethylene (LDPE). Graduated on the outer surface to reflect an approximate volume of solution filled or dispensed.  Bottles in clude polypropylene (PP) caps, one each of red, yellow, blue, and white.

GHS Compliant Pre-Printed Wash Bottles Compliant for June, 2015: bottles meet the latest requirements of GHS and OSHA HAZCOM 29 CFR 1910.1200 for workplace labels All bottles include Globally Harmonized Pictograms and signal words, NFPA diamond, risk phrases and safety information …

Wide mouth GHS wash bottles featuring the patented DripLok® vapor venting valve that prevents solvent drips Custom write-on wash bottles are printed in English only for 250 and 500mL and 3 languages for 1000mL (English, French, German) Choose from four solvent labels, all including the…

These bottles are manufactured from low density polyethylene and are offered with a narrow or widemouth. The cap and dispensing tube are manufactured from PP to optimize backflow of the solution. The design allows minimal turbulence of the liquid in the bottle.

Low-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL

An affordable assortment of some of the most commonly used plastic labware items. Kit consists of 20 items shipped in a plastic storage box. Contains: 100ml PP Beaker, 250ml PP Beaker, 10ml PP Graduated Cylinder, 100ml PP Graduated Cylinder, 65mm dia funnel, Drop Dispenser bottle, 4 reagent…

Right-to-Know safety-labeled wash bottles are pre-printed with the full color NFPA diamond and other important safety information providing compliance with OSHA requirements. Unique, patented 2-piece valve prevents pressure build-up of solvents and eliminates dangerous drips. Valve also allows…

Traditional style wash bottles fitted with polypropylene swivel/leak-proof closures. Maximum temperature of LDPE is 80°C. All narrow mouth wash bottles are supplied capped in shrink-wrapped packs of five.

Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…

These high quality natural wash bottles are supplied in flexible natural polyethylene and are fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward…

These bottles are made of translucent and Low Density Polyethylene. The distinguishing feature that these bottles contain is the built-in delivery tube making it a one-piece wash bottle. These bottles are graduated on the outer surface to reflect an approximate volume of solution filled or dispensed.

With fritted disc. Joint is 29/42 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

The closure and stem are molded in one piece to make them leak proof. The angled neck and tip provide a uniform stream of liquid and the tip can be cut back if required to increase the flow. A wide bottled mouth makes filling easier. The bottle is made from LDPE with a PP closure.

These high quality Water wash bottles are supplied in flexible natural polyethylene and fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward…

A customized plasticware assortment that is designed for general laboratory use. This kit offers the following: set of 5 beakers (50, 100, 250, 500, & 1000ml), Graduated cylinder set of 4 (10, 25, 50, & 100ml), 250ml Wash Bottle, 500ml Wash Bottle, 250ml PP Narrow Mouth Reagent Bottle, 500ml PP…

Delivery tube is removable from cap Of translucent Teflon ® FEP especially suited for trace metal work

Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.

Low-density polyethylene wash bottle is labeled in highly visible characters Includes approximate volume graduations (50ml to 450ml in 50ml increments) Fill to textured line for 500mL One piece polypropylene cap and nozzle assembly

Easy-squeeze 250ml and 500ml wash bottles with integrally molded tube. Requires only gentle pressure to eject and accurately  direct the liquid. The dispensing tip can be cut back  to increase the flow rate. Maximum temperature of  LDPE is 80°C.