Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

Disposable cuvettes with four optically clear sides from BRAND for use in fluorescence applications when results count.  Available in high quality polystyrene for measurements from 340nm to 800nm, as well as a proprietary polymer for precise measurements in both the visible and UV-range…

Designed for the measurement of very small samples Retain exterior dimensions of standard cells Volume range: 10 µL to 160 µL Path length: 10 mm The entrance to the sample compartment is hemispherical to eliminate sharp corners which can cause sample loss due to…

Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

Matched pair, stoppered with PTFE stopper supplied. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies vasra tool adjuster is suitable for use in chromatography products. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Disposable Methacrylate Cuvettes Convenient and affordable Save time with no cleaning required Prevents cross-contamination Useable in the range of 285 to 750 nm. Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside…

Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S.…

Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The…

The Agilent Technologies temperature probe holder is suitable for use in rectangular micro-cells. Application: For Use in Rectangular Micro-Cells This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent offers a range of cell holders, providing you with the ability to analyze a wide variety of samples. Standard, cylindrical, long pathlength, and variable pathlength cell holders, bases and test tube holders are all available for Agilent UV-Vis and UV-Vis-NIR systems. Application: For…

The Agilent Technologies accessory is used in HPLC (high-performance liquid chromatography) system, which is mainly used in biochemistry and analytical chemistry experiments to separate individual components from the mixture. This accessory ensures smooth and reliable functioning of the HPLC…

Allows transmittance measurements of solid samples at various incident angles. The sample can be positioned through 360 degrees to the incident beam and is selectable to 1 degree. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis. Front Mounted,…

BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

Deuterium and Visible source lamps provide good intensity over the widest possible wavelength range, plus optimum stability to ensure the best performance with Agilent UV-Vis and UV-Vis-NIR systems. They are selected by our QC process to ensure the optimum lifetime. This product is only available…

The macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies UV convenience kit comes with two open top UV quartz cell, 10 mm, 3.0 mL, 5061-3387 disposable polystyrene cells, 10 mm, 3.5 mL volume, 6610018800 cell tray with capacity for 16 cells, 5063-6577 lint-free lens cleaning paper, 9300-0761 and UV cell cleaning solution. This…

Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

Matched pair, open top with PTFE lid supplied, Compatible with Agilent Cary Eclipse Fluorescence spectrophotometer. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Magnetic stir bars or star type stirrers provide uniform and thorough mixing of samples in cuvettes. The stir bars are recommended for the stirring module and Peltier thermostatted (1 x 1) cell holder. The star stirrer is recommended for Peltier thermostatted multicell holders for Cary UV-Vis…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Until recently, flow-through cells had measuring chambers that were either rectangular or circular in shape. These shapes were dictated by limitations in the manufacturing process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new…

Quartz, round aperture 3mm diameter, M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For…

Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5…

Matched pair, stoppered with PTFE stopper supplied, self-masking black walls, z height 20mm, 2/pk. Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not…

The Agilent Technologies 3 mm driver ball with handle is suitable for use with spectrometry system products. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…

Test tube holder, for using 16mm od test tubes in sample compartment instead of conventional cuvettes, for Cary 50/60 only. Application: For Using 16mm OD Test Tubes in Sample Compartment Instead of Conventional Cuvettes, For Cary 50/60 Only, UV-Vis & UV-Vis-NIR This product is only available to…

The Agilent Technologies mercury lamp is suitable for Cary 4000/5000/6000i and UV-Vis wavelength validation. Application: For Cary 4000/5000/6000i, For UV-Vis Wavelength Validation This product is only available to U.S. Domestic Customers. For research use only, not to be used in…