Supplies, Polypropylene
-
labForce® Centrifuge Tubes
labForce® (powered by Thomas Scientific)Printed Graduations (with marking area) New clearer polypropylene copolymer High centrifugal strength - up to 15,000 RCF Flat markable cap with seal Phenol / Chloroform resistant DNase, RNase and pyrogen free
-
Polypropylene Surface Protect
UltraTapeUT1120/0120 is an embossed polypropylene film with rubber adhesive.
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Polypropylene Beakers
GSC International, Inc.These graduated beakers are molded from tough, translucent polypropylene and incorporate raised outer graduations for ease of reading. They have a tapered spout, and are chemically-resistant and autoclavable. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational…
-
Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only…
-
Nonwoven, meltblown polypropylene presaturated wipes Solvent: 70% isopropanol/30% deionized water Very low levels of sodium and other ions Resealable pouch preserves cleanliness and…
-
Kord-Valmark™ High Quality, Clear Polypropylene Conical Bottom Centrifuge Tubes
Bioplast ManufacturingLeak Proof 95 kPa Compliant Temperature range from -80°C to 120°C Maximum RCF 50mL tube = 15,500 x g 15mL tube = 12,000 x g Polypropylene Tubes with HDPE Caps RNASE Free, DNASE Free and Pyrogen Free
-
-
SuperSpin™ tubes feature an extra-thick and durable wall that can withstand centrifugation to 40,000 x G. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces that make this tube easy to…
-
Sterile 50 mL Centrifuge Tubes with Caps
Caplugs Evergreen®50 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport. …
-
Polypropylene Excellent chemical resistance Molded pitchers with large, comfortable handles and well designed pouring spouts Graduations are metric, permanently translucent on outside wall Steam autoclavable at 121°C (250°F) Shatter-proof
-
Carboy Heavy Duty PP w / Handles 10L
Thermo Scientific NalgeneThermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …
-
PREempt RTU Disinfectant Solution and Wipes work to ensure user, protocol and product compliance with fast contact times and broad-spectrum efficacy. PREempt RTU utilizes Accelerated Hydrogen Peroxide Technology® (AHP®), a patented synergistic blend of commonly used, safe ingredients that…
-
BRAND reagent reservoirs are made from heavy-duty polypropylene to withstand repeated autoclaving. Lids are included to help protect against sample contamination For use with all multichannel pipettes
-
Polypropylene Screw Closures
Thermo Scientific Nalgene1228A16, A17 and A25 are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks 1228A27 is for use with carboys Autoclavable Available in natural and amber
-
Microcentrifuge Tubes with Tethered Caps
Caplugs Evergreen®Microcentrifuge tubes fit all standard microcentrifuges and cover a range from 250 µl to 1.8 mL. Tubes come in variety of material options and different styles, such as standard, thin-wall or graduated. Polypropylene tubes withstand up to 11,600 × g and polystyrene tubes…
-
Thistle Tubes
SP Bel-ArtMake additions to burettes and narrow neck containers easily with this flared top thistle tube. Polypropylene plastic; chemical resistant, unbreakable, safe Steam autoclavable at 121°C (250°F) Dimensions: 27mm (1-1/16") I.D. top with a 41mm (1-5/8") O.D. flare …
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
CryoKING® Traditional Cryogenic Vials with pre-assembled Red, Green, or Blue Caps, Case of 1000. Size Options: 2mL, and 5mL. All tubes come with a 1D on the side
-
Wide Mouth Polypropylene Carboys with Handles
Thermo Scientific NalgeneStore and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…
-
30 mL Centrifuge Tubes with Caps
Caplugs Evergreen®30 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport. …
-
Autoclavable Polypropylene Utility Trays
Thermo Scientific NalgeneHeavy-duty for repeated autoclaving of small instruments and labware With tapered sides, rounded corners and strong rims Stackable
-
Biologix clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with safe lock or flat top caps available. Tubes have frosted writing area and marked graduations.
-
PCR Tubes
EppendorfEppendorf PCR Tubes Manufactured from polypropylene Reduced risk of contamination Available in 0.2 and 0.5 mL sizes 2-part polycarbonate rack consists of work tray and frame for 96 x 0.2 mL PCR tubes All tubes can be directly transferred to the Thermoblock Autoclavable at…
-
GL 45 Media Storage Bottle Caps
DWK Life Sciences (Kimble)Caps are designed to fit GL 45 threaded ware. Autoclavable Solid top polypropylene Cap colors available in blue, white, orange, gray, green, or pink High-temperature version with red cap available
-
Polypropylene Racks for 12mm and 16mm OD Vials
DWK Life Sciences (Kimble)Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking
-
Bacti Cell Spreaders
Bio PlasThe Bacti Cell Spreaders are unique products designed to greatly simplify and speed up bacterial culture work. There are two sizes: 30mm and 60mm wide, which allow these polypropylene Bacti Cell Spreaders to make it very easy to evenly distribute bacterial cells rapidly over an entire nutrient…
-
PROSAT® PS-919 Wipe
ContecContec's PROSAT Presaturated Wipes feature polypropylene, polyester or polyester/ cellulose nonwoven wipes presaturated with IPA and DI Water blends in flat re-sealable pouches individually lot-numbered for traceability. These specially designed pouches preserve cleanliness and solvent…
-
QuickTask™ Mopping System
ContecContec's QuickTask flat mop product line consists of a variety of knitted polyester, polyester/cellulose, microfiber/foam and microfiber mop covers that are easily installed onto a hinged mop head frame and QuickConnect handle. QuickTask mop head frames are available in stainless steel or…
-
General Storage Cryogenic Vials
Thermo Scientific NalgeneEconomical, non-sterile without printing or graduations Deep-skirted screw closure design minimizes risk of contamination Self-standing without a holder; conical bottom allows complete sample retrieval Externally-threaded polypropylene vials and high-density polyethylene closures minimize…
-
Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…
-
30 mL Centrifuge Tubes and Caps
Caplugs Evergreen®30 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport. …