Equipment, Chambers
-
HCP Series Humidity Chambers
MemmertPerfect environmental simulation in the humidity chamber This climate chamber offers the full range of comfort, reliability and safety. Thanks to active humidity control from 20 % to 95 % rh and unsurpassed homogeneity of temperature and humidity over the entire interior, it is ideally suited…
-
The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this constant climate chamber is its low spacerequirement and flexibility in terms of water supply. The wide temperature and humidity range make this constant climate chamber ideally suited…
-
Temperature measurement 27 measuring points - including certificate, 27 measuring points at specified temperature - for ED, FE, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series
-
The BINDER MK series chamber is suitable for all heat and cold tests between -40°C and 180°C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests. Temperature range: -40°C to 180°C APT.line™ preheating chamber technology …
-
Warranty extension from 2 to 3 years - The warranty is extended from 2 to 3 years from the delivery date, wear parts are excluded
-
The KBW series climate chamber with illumination achieves homogeneous light distribution and ensures consistent temperature conditions with its natural illumination. Temperature range: 0°C to 70°C Temperature range with light: 5°C to 60°C Positionable illumination…
-
-
The new Solid.Line KBF-S climate chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature and…
-
The products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance. Temperature range:…
-
A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads. Benefits High temperature accuracy thanks to APT.line™ technology User-friendly controller…
-
-
Temperature measurement 9 measuring points - including certificate, 9 measuring points at specified temperature - for ED, FD, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series
-
Sykes-Moore Gasket, 2.5mm 2.5 mm Working Distance
Bellco GlassSykes Moore Gasket 2.5mm Specifications: Dimensions: 1" x 3/4" x 1/8" Working Distance: 2.5mm in the Sykes Moore Chamber Packed 6 per case
-
A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.…
-
Sykes-Moore Gasket,1.5mm 1.5 mm Working Distance
Bellco GlassSykes Moore Gasket 1.5mm Specifications: Dimensions: 1" x 7/8" x 1 1/6" Working Distance: 1.5mm in the Sykes Moore Chamber
-
The products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance. Temperature range:…
-
Included are: drying train system for moisture reduction, programmable catalyst heater unit, ambidextrous Hypalon material gloves, touch screen controls, oxygen analyzer, transfer chamber, outlet strip 2-year warranty
-
The special advantage of the KBF LQC series: the patented photometry for photostability testing. Two spherical 3D ball-type sensors capture visible light intensity and UV light intensity – if the desired light dosage is achieved, it switches off automatically. Temperature range:…
-
Battery Test Chambers
BinderBattery Test Chambers with safety equipment for rapid temperature changes. Battery test chambers from BINDER are suitable for tests performed on lithium-ion cells and modules. The LIT MK series of temperature test chambers from BINDER provides a controllable temperature range of -40 °C to +110…
-
Bugbox Anaerobic & Microaerophilic Workstations
The Baker CompanyBaker's Bugbox anaerobic & microaerophilic workstations are designed specifically to help microbiologists cope with rising workloads and provide the best primary isolation rates. Read plates easily without exposing them to oxygen. With quick and easy access via the Ezee Sleeve™…
-
CApture™ BT Fuming Chambers
LabconcoMicroprocessor control automates cyanoacrylate (CA) fuming of evidence Large 19 cubic foot chamber with 58.6" diagonal length - holds up to 15 long guns Programmable operating system for precise parameters and repeatable programs Fuming to 424° F with built-in humidifier and…
-
Humidity and Temperature Stability Chambers
Horizon IndustriesController Information: Proportional integral derivative (PID) controller with LCD display Programmable ramp and soak Process phase graphic animations USB data port RS-485 communication (MODBUS-RTU) Real time clock Battery backup Event logs: 100 Visual alarm…
-
SecureDry™ Evidence Drying Cabinet
Mystaire®SecureDry evidence drying cabinets are designed to provide a secure and dedicated area for drying wet evidentiary items while creating a barrier to keep out the potential threat of cross contamination. The cabinet utilizes pre-filtration, HEPA and carbon filtration to minimize the potential for…
-
Environmental Chambers
Caron Products and Services Inc.Caron’s environmental/stability chambers provide an ideal test environment, not only for ICH Q1A drug testing, but also for a wide range of shelf life testing applications. Combining precise repeatable performance with a full range of sizes, these produc
-
Temperature Test Chamber
Corepoint ScientificOne swing glass door, self-closing, right hinged, not reversible Three, 304 stainless steel sliding tray shelves Controller Information: Proportional integral derivative (PID) controller with graphic display Programmable ramp and soak Process phase graphic animations …
-
Temperature measurement 18 measuring points - including certificate, 18 measuring points at specified temperature - for ED, FD, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series
-
-
The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this humidity test chamber is its low space requirement and flexibility in terms of water supply. The wide temperature and humidity range make this humidity test chamber ideally suited for…
-
Organoid Counting Software
CorningBy purchasing the software extension, customers will be able to accumulate concentration in orgs./mL and collect surface area data in micrometers squared of their 3D cell cultures; a feat that existing standalone brightfield cell counters simply cannot offer. At launch, we are introducing 2…
-
The new BINDER Solid.Line KBF-S ECO Climate Chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature…
-
The KBWF series shines with its homogeneous light distribution with natural illumination from above. It creates consistent climate conditions – even with illumination. Temperature range: 0°C to 70°C Temperature range with light: 10°C to 60°C Humidity range: 10 %…
-
Measurement of air exchange rate - including certificate (in accordance with ASTM D5374)