no change
-
PB-900™ Series Programmable Jar Testers
Phipps & BirdThe Phipps & Bird state-of-the-art programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities: Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm…
-
Benchmark’s Overhead Stirrers
Benchmark ScientificBenchmark’s Overhead Stirrers feature advanced LCD controls for accurate display of both speed and run time. The stirrers include a support stand complete with mounting hardware. The mixer is easily attached at the desired height for compatibility with a wide range of vessels (up to 24…
-
The ultimate in compact design measuring only two by four inches. The BDC250 offers great capabilities in a small package; used in formulation, R&D, clinical research, education labs, anywhere a magnetic stirrer is used. It fits into small spaces and can be easily transported to other labs or…
-
A powerful combination of torque and electronic sophistication. The robust 1/2 horsepower motor, PC/PLC connectivity and extensive features make the Caframo Crossover unparalleled in the market. Mixing up to 200 litres (55 gallons) in basic pre-mix, complex pilot scale, or full production batches…
-
STARVISC Torque-Measuring Stirrers
IKA WorksMeasure viscosity and display it, even during product development: the new IKA STARVISC 200-2.5 control torque-measuring stirrer makes it possible. The result can be read in real-time on the display. STARVISC therefore has a broad range of applications. This is particularly helpful during product…
-
The ROTAX 6.8 is suitable for waste treatment plants, waste-water treatment plants and laboratories involved in environmental analyses. An easy to use instrument with a digital display and speed settings ranging from 0 to 30 rpm. Precise and extremely safe, the ROTAX 6.8 offers excellent performance.
-
Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.
-
This lightweight micro stirrer is ideal for use with tissue grinders having stainless steel pestles. Supplied complete with a stirrer/controller, tripod with a vertical support rod, clamp holder and a coupling to fit the 6.35mm diameter of the stainless steel pestle rod.
-
Clamping Systems
Arrow Engineering“Power Hold” Universal Clamps (8583L36 and L40) Designed with large knobs for powerful gripping plus an adjustable stop for speed and safety in set up and operation Made with precision machined aluminum rod for strength and durability Used for most applications Will hold any stirrer with…
-
Stirrer Accessories, Blades
DynalonShaft Stirrers/Blades Unaffected by virtually all chemicals PTFE construction Unbreakable and will not scratch vessels Usable to 260°C Of virgin PTFE, immune to most chemical attacks (except molten alkali metals). Excellent anti-adhesion properties promote thorough…
-
Features: Compact overall Height Brushless DC motor Micro USB port for Control or Data Logging of RPM/Torque trends RS232 Communication Port Torque Compensation – Maintains set RPM with Viscosity Changes Precise Digital Closed Loop Speed Control: +/- 1.5 RPM CE Rated …
-
Overhead Stirrer Accessories, Stands and Paddles
Techne (Cole-Parmer)Stands Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer. Paddle Rods Made from high grade stainless steel, there is a choice of five…
-
The DLS is a digital overhead stirrer for medium-low viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs…
-
PTFE Shafts and Propellers
Arrow EngineeringMUST BE ORDERED AS AN ASSEMBLY. A PTFE Propeller must be ordered together with a PTFE Shaft (each purchased separately).
-
Overhead Stirrers Accessories
IKA WorksThomas No. 1203B76 Stirrer diameter: 55 mm Thomas No. 1203B77 Stirrer diameter: 45 mm Thomas No. 1203B78 Stirrer diameter: 42 mm Thomas No. 1183U39 Stirrer diameter: 50 mm
-
Hei-TORQUE Overhead Stirrers
HeidolphThe Heidolph overhead stirrers of the Hei-TORQUE series are perfectly designed for powerful stirring, in order to achieve best mixing results even for very challenging applications. Hei-TORQUE Value These stirrers are ideal for standard stirring tasks. They are designed to mix and…
-
Stirrer Assembly, Vacuum, Debris Free
Ace GlassRotating ball joint seal gives vacuum-tight connection good into the micron range. Ultimate vacuum is determined primarily by the tightness of the vinyl tubing connector which fastens the unground shaft to the ball member. Operate below 500 rpm. Use with unground stirring shafts (8134,9530).…
-
Thomas No. 1177M31 Sturdy stand in a smaller bench footprint, for Caframo compact stirrer models BDC2002 and BDC2010. The unique offset design accommodates Caframo clamp so stirrer locates impeller in centre of vessel. The cast zinc-aluminum alloy base is coated for protection from corrosion and…
-
Stir Shaft, Retreat Agitator, PTFE
Ace GlassPTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.
-
MM-1000 Overhead Stirrer Multi Mixer, 120v & Accessories
Grant InstrumentsThe MM-1000 is designed for stirring liquids up to 20 litres. It is a quiet and reliable mixer that provides stable continuous mixing for up to 7 days and features 3 types of motion: Rotational, Reciprocal and Vibration. It is an ideal instrument for biotechnology, organic synthesis, analytical…
-
Digital Stir-Tester Accessories
Glas-ColStirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…
-
The ReversingDigital stirrer maximizes productivity, fits into any area of the laboratory including a fume hood or enclosed workstation, and provides accurate and repeatable results every time. This stirrer also offers a choice of rotation direction - clockwise, counter clockwise or both (agitation…
-
LabJaws Support Stands
OhausSupport Stands are made entirely of 303 stainless steel. They have a durable base that can accommodate vessels up to 18" (457 mm) in diameter within the “U”. The base area is 17.75" (451 mm) across × 10.5" (267 mm) deep overall. The stainless steel support rod is…
-
G.K.H. Stir Systems
Glas-ColDesigned to meet mixing requirements for varying viscosities and volumes Feedback circuitry to maintain speed when viscosity changes Reference circuitry to maintain speed even with voltage fluctuations of ±10% Cord connections between drive motors and controls Stirrers filter the drive…
-
Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…
-
Stirrer Accessories
ScilogexAccessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid
-
Material: 316l stainless steel with ra32 finish or better Size: 36l Paddle size: 3" tall x 12" wide
-
Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…
-
Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo…
-
Material: 316l stainless steel with ra32 finish or better Size: 15l Paddle size: 3" tall x 7 1/2" wide
-
MICROSTAR digital Overhead Stirrers
IKA WorksThe space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require…