Hardware, General Chromatography, PerkinElmer
-
Internal Standard Mix 125mL
PerkinElmerFrom instrument installation to instrument calibration, we provide quality set-up, check and calibration standards to ensure instrument performance.
-
-
PerkinElmer has Thermo Electron Pyrolytically-Coated Ridged Graphite Tubes made with the highest quality material for Thermo Electron AA instruments.
-
-
DTA Calibration Reference Material, Aluminum, Transition Point: 660.10C
-
Pure Grade Standards for AA and ICP-OES: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certi cate Impurities reported at ppm level All Standards are prepared and certified under ISO Guide 34 and ISO 17025 …
-
Concentration: 10,000 µg/L Matrix: 5% HNO3 Volume: 500 mL Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities reported at…
-
Detection Limits Calibration Standard
PerkinElmerThe PerkinElmer detection limits calibration standard with a 4 Ounce capacity is used in chemical laboratories.
-
-
Replacement Reed Valve for oil free Compressor
PerkinElmerReplacement Reed Valve for oil free Compressor
-
-
Metallo-organic metals in hydrocarbon oil Accuracy ensured by Quality Testing with NIST® Standard Reference Materials when available Certificate of Analysis supplied with each standard
-
Hitachi Zeeman Contacts, AD 18 mm
PerkinElmerThe Hitachi Zeeman Contacts are fit-to-perform in your Hitachi Zeeman furnace and are equivalent to Hitachi part 172-8805.
-
Optima/Avio Solution Kit
PerkinElmerMixed Calibration Standard 2% HNO3, 500 mL (N0691579) 50 µg/mL: As, K 10 µg/mL: La, Li, Mn, Ni, Sr, Zn 1 µg/mL: Ba, Mg 2% HNO3, 125 mL (N0773120) In ASTM ® Type I Water 5% HNO3, 125 mL (N9300221) 100 µg/mL: As, Tl 50 µg/mL: Cd, Pb, Se Vis Wavecal…
-
Instrument Check Standard 1
PerkinElmer10 PPM AG, AL, AS, BA, BE, CD, CO, CR, CU, MN, NI, PB, SB, SE, TL,V, ZN, in 2% HNO3/trace Tart-HF, 100 ML
-
-
-
Mixing/Separation Assembly
PerkinElmerComplete modular unit, consisting of: two mixing manifolds with tubing adapters K and M. A gas-liquid separator with a PTFE membrane 5 spare PTFE membranes 1 PTFE tube 110mm long, and 1 PTFE tube 300mm long. Can be used with AA, ICP-OES, ICP-MS and Flow Injection Mercury Systems.
-
Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described. Connects to 3mm waste tubing.
-
Adapter L, 1/4in (6.4 mm) External Screw Thread, 2.8mm Outer Diameter Nipple for FIAS-100, FIAS-400, FIAS-400MS and FIMS
-
Dysprosium 1 µg/mL Single Element Pure Standard
PerkinElmerEach standard is supplied with a comprehensive Certificate of Analysis that documents its quality and reliability. Each standard: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…
-
The Shimadzu Left Electrode with Housing is fit-to-perform on a Shimadzu atomic absorption (AA) instrument and is equivalent to Shimadzu part 206-50602.
-
The Mercury (Hg) Metallo-Organic Standard from PerkinElmer is suitable for a range of ICP-MS applications.
-
-
Caffeine Quantitation Test Kit
PerkinElmerIdeal for a variety of analyses, this single quadrupole detector brings the unsurpassed sample insight of mass spectrometry to liquid chromatography applications. The Flexar SQ 300 MS ™ is an integral part of the powerful and exible Flexar LC product line. It features a revolutionary…
-
Each certificate also includes NIST documentation and information regarding the methods used. Designed to contain virtually every element in the mass spectrum for concentration checks. Multi-element Calibration Standard 1, Matrix per Volume: 2% HNO3 per 100 mL, Concentration of Element:…
-
1.8 mm Sapphire injector for Optima 8000 Series
PerkinElmerPlease note: Compatible with ESI press-fit PFA spray chamber connection.
-
The injector is used for volatile organic solvent introduction and recommended for a wide range of non-HF applications. For use with Demountable Quartz Torch (N8152379).
-
The V-21 Wear Metal Standards from PerkinElmer are ideally suited for the analysis of metal additives, wear metals and contaminants in engine oils by ICP-MS.
-
Rectangular Fluorescence Micro Cells without Lids for routine liquid analysis.
-
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
The rotor seal is the polymeric disc that makes a high pressure seal against the stator. The seal wears with use and is one of theonly parts that may need routine replacement. Stators need replacement only if the ports become damaged. Vespel blend rotor seals have an operating pH range from 0 to…