Specialty Flasks
Specialty flasks are the backbone of many experimental setups, offering the durability and precision needed for demanding experiments.
Explore our diverse collection, including round bottom flasks, single neck flasks, bioreactor flasks, Ace Glass freeze-drying flasks, and 4 neck flat flange reaction vessel covers. All flasks are carefully designed to withstand the requirements of multiple research and analysis procedures.
In this category, you'll discover renowned brands such as Chemglass, Ace Glass, and Kemtech America, all known for their commitment to quality and innovation in lab glassware.
Whether you're searching for a Schlenk flask, a three-neck round bottom flask, a biomass flask, or a 3-neck flask for your lab, we offer a selection of flask options suitable for a range of experiements. Trust our specialty flasks to provide the precision and durability your research demands.
-
Flask, Reaction, Cylindrical
Ace GlassCylindrical, heavy wall reaction flask with extra thick flat, ground flange. Without constriction at top to facilitate introduction/removal of material and allow for ease of cleaning. Available in 1L to 4L capacities, flat bottom and round bottom, with
-
SYNTHWARE Transfer/Storage Flasks
Kemtech AmericaSYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.
-
Round bottom 2-neck flask having standard taper outer joints, both being of the same size. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve. Side neck can be fitted with a CG-3022 septum…
-
KIMAX Sugar Flasks
DWK Life Sciences (Kimble)Kohlrausch, Class A Borosilicate glass Calibrated to contain 20°C Mouth enlarged for easier introduction of sample Meet NBS requirements
-
CELLine Adhere
Argos TechnologiesCELLine Flasks are ideal for monoclonal antibodies and expressed recombinant cellular protein production. Viable in vitro alternative to using, standard cell culture or tissue culture products or mouse ascites. Bioreactors utilize innovative membrane technology to separate the cell cultivation area…
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
VITLAB, PFA Round Bottom Flasks
BrandTech®These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…
-
Cylindrical Reaction Kettles
SP Wilmad-LabGlassCylindrically shaped, the upper end of these borosilicate glass reaction kettles are tooled to obtain a thickened portion and flat top.The finely ground tops create a leak-proof fit with covers LG-8030 to LG-8050, ML-1285 and ML-1286.
-
Round bottom, HEAVY WALL, four-neck flask with standard taper outer joints on the center neck and vertical side necks. The third neck is a 10/30 outer joint for use with a CG-3506, 10/30 jointed thermometer. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in the…
-
Arsine Generator, Guthzelt
Ace GlassDesigned for arsenic analysis by the diethyldithiocarbramate colorimetric method. Meets APHA Standard 104A, ACS/USP, and EPA specifications. All wetted surfaces are borosilicate glass or PTFE clad joints. Code -40 complete unit consists of one 24/40, 125ml erlenmeyer flask, one 24/40 to 12/2…
-
Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.
-
Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks.
-
Heavy wall cylindrical reaction flask with Duran grooved flange opening. Flask has Zero Dead Space, (ZDS), bottom valve. The valve features no material hang-up in the fully open position. When closed, the valve seats flush with the bottom of the flask. Includes one CAPFE o-ring. See Ace 6517 for…
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Glassblowers Flask Blanks, Round Bottom
ChemglassBlanks for fabrication of single or multi-neck round bottom flasks. NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Kriel Reactor, Photochemical
Ace GlassReactor is most useful in prep-scale photolysis and features tapered sides which assures full submersion using our 7825-34 or 7825-36 lamps within the supplied quartz immersion well. A 20% savings in reaction time over round bottom flasks. Additionally
-
SYNTHWARE Modified Schlenk Flasks with High Vacuum Valves
Kemtech AmericaSYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…
-
Equilibration Flask
Ace GlassDesigned by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…
-
Reaction Flask Head, Four Neck
Ace GlassHead with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps.…
-
Jacketed Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…
-
Round bottom storage flask with a standard taper outer joint on the sidearm. The 50, 100 and 250mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 500 and 1000mL sizes have a 0-8mm valve size.
-
SYNTHWARE Reaction Tubes with High Vacuum Valve
Kemtech AmericaSYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and angled standard taper reinforced outer side neck.…
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.
-
PTFE Reactor, Body Only
Ace GlassAll PTFE reactor body, component of our 6390 PTFE Filter Reactor product family.
-
Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. This style also has a side thermowell port to facilitate a thermometer or a temperature probe to measure flask temperature without losing the pressure integrity of the vess
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Rugged spherical reaction flask with Duran style flat flange with O-Ring groove, for use with 6517 Quick Release Clamp. Various valve and bottom fitting configurations available, see individual listings. each flask includes a CAPFE (PTFE encapsulated silicone) O-Ring. Plain silicon O-Rings are also…
-
Flask, Tapered wall, Five Neck, Jacketed
Ace GlassFully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with