Boiling Flasks
-
SYNTHWARE Round Bottom Two Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Round Bottom Angled Four Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Borosil® Round Bottom Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate. Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, Interchangable Joint, and an…
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, two neck flasks with an angled side neck. All joints are standard taper outer joints. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, single neck flasks with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint.
-
Flask, Two Neck, Angled Side Neck
Ace GlassTwo neck, one center and one angled side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Heavy wall, wide mouth flask with a GL80 glass thread and a 24/40 connecting adapter. Flasks have a heavy wall for vacuum applications and are balanced to prevent run-out during rotation. Unique design makes it easier to handle highly viscous liquids, powders, and solids. The large opening permits…
-
ValueWare® Flat Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Heavy Wall 2L Round Bottom 2-Neck Flasks
Across InternationalAi 2L, 24/40 standard taper joint, heavy wall, round bottom 2-neck flask with one vertical 24/40 neck, and one angled 24/40 side neck. Glass material: high borosilicate glass 3.3.
-
Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
-
Round bottom, HEAVY WALL flask with a standard taper outer joint and a #7 Chem-Thread as a side neck for insertion of thermometers or bleed tubes having an O.D. between 4 and 7mm.
-
SYNTHWARE Round Bottom Flasks with Spherical Socket Joints
Kemtech AmericaSYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.
-
Borosil® Flat Bottom (Florence) Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate, Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, beaded rim for…
-
Round Bottom Three Vertical Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have three vertical necks with Standard Taper outer joints. The side necks are 180° apart.
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
Borosilicate Glass Round Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, round bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. Ideal for boiling, heating and mixing in the laboratory.
-
Borosilicate Glass Flat Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, flat bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass Feature uniform wall thickness for superior mechanical strength and shock resistance Ideal for boiling, heating and mixing in the laboratory
-
SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.
-
Flask, Round Bottom, Single Neck
NDS Technologies5 mL 14/20 center neck Single neck round bottom flask with an outer joint.
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Flasks, Quartz, Flat Bottom, Single Neck
ChemglassSingle neck, flat bottom, quartz flask with standard taper outer joint.
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
ValueWare® Flat Bottom Flasks, Florence, Reinforced Beaded Top
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
Flask, Round Bottom, Three Neck
Ace GlassWith outer joints with side necks angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Round bottom, three neck flask with angled sides. All joints are standard taper. Available in standard and heavy wall.<
-
Flask Boiling Round Bottom 250ml
DWK Life Sciences (Kimble)KIMAX® round bottom boiling flask with a short neck and a medium length Standard Taper joint Designed from ASTM Specification E1403, Type II, Class III requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. Flask has two hooks 180°; apart for use with CG-110 stainless steel springs.