Cell Culture Flasks
Cell culture flasks and bottles are ideal for growing and maintaining cells in culture. Cell culture flasks are typically manufactured from borosilicate glass, polystyrene, and polycarbonate, suitable for a range of laboratory applications. Various sizes are available from Thomas Scientific, from 25ml to 1L and a number of T flasks. Tissue culture flasks are suitable for various applications within the lab, including cell biology, microbiology, biochemistry, and genetics. The availability of various shapes and designs means some flasks may also have additional features, such as filters or vented caps, to assist the exchange of gases and maintain the proper environment for cell growth. T25 flasks offer the ideal surface and ancillary options. All tissue culture flasks allow for the attachment and growth of cells and the exchange of gases.
-
150 cm 2 cell growth areas Canted neck style U-Shaped Flask Style Non-pyrogenic Sterilized by gamma irradiation Optically clear virgin polystyrene material Corning cell culture flasks are manufactured under strict process controls for consistent product performance. …
-
ProCulture® Magnetically Driven Vortex Impeller Only
SP Wilmad-LabGlassVortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration of media All components are autoclavable Impeller components are made from FDA approved materials
-
Cell Culture Flask
BiologixCulture flasks are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers. Flasks are divided into 6 types, depending on the culture scale and the cap type.…
-
Fernbach style culture flask with 38mm long style straight neck to accomodate plastic or stainless steel closures, see Ace 3917 & 3918 product families. Flat bottom, no baffles. Caution! Do not place on direct heat source.
-
Helps adapt cells to reduced serum or serum-free conditions 25, 75 or 150 cm 2 sizes 10, 60 or 210 mL maximum working volumes Rectangular canted neck cell culture flasks have been treated with a patented Corning® CellBIND surface treatment for optimal cell attachment.…
-
Corning ECM mimetic surfaces and substrates contain biologically active, synthetic, animal-free peptides that have been rationally designed to mimic the cell attachment motifs of native ECM proteins. The peptides enable optimal cell binding and signaling in a broad range of serum-free, xeno-free,…
-
Delong style neck Four extra deep bottom baffles Borosilicate glass, type 1, class A
-
Corning PureCoat amine (positively charged) and carboxyl (negatively charged) surfaces provide improved cell attachment, faster cell proliferation, and enhanced recovery post-thaw over standard TC surfaces. These surfaces function with a broad range of primary, transfected, transformed, and…
-
Cell culture shake flask with three bottom edge baffles and three bottom baffles to greatly enhance mixing of cells in suspension and gas transfer to media. Ideal for use with reciprocating baths and shakers. Long style, straight neck accomodates either plastic or stainless steel closures, see Ace…
-
Double Sidearm Celstir® Spinner Flasks
DWK Life Sciences (Wheaton)With Cell Suspension Stirrer, Celstir® Entire flask assembly can be autoclaved Offered in six sizes, working capacities 25 to 1,000 mL Easy access through side arms Of Wheaton “200” borosilicate glass Cylindrical with screw neck and polypropylene cap …
-
PYREX Low Form Culture Flasks
CorningMaximum o.d. 250 mm; height 195 mm Takes number 6 1/2 rubber stopper Capacity 2,500 mL
-
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.
-
Manufactured from type 1 class A borosilicate glass and designed for culturing organisms requiring a large surface area-to-volume ratio. Flask features a 38mm DeLong style neck and can be used with a 38mm SST closure 2005-00038 (sold separately). Dimen
-
-
Shake Flasks are the basic tool for growth studies of aerobic microbial cultures and have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for use with Orbital Shakers.
-
PYREX Crystallizing Dishes
CorningWith reinforced rims, fire-polished to reduce chipping Will withstand repeated sterilization (wet or dry) Ideal for storage and crystallization
-
Advanced TC™ Standard Cap Cell Culture Flask
Greiner Bio-OneAdvanced TC™ polymer modification for fastidious or sensitive adherent cells Free of detectable DNase, RNase, human DNA Non-Pyrogenic, non-cytotoxic Growth area: 25 cm 2 Total Volume: 50 mL Working volume: 5 mL - 10 mL With blue standard screw cap Sterile …
-
Shake Flasks are the basic tool for growth studies of aerobic microbial cultures and have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for use with Orbital Shakers.
-
Aldrich® single-neck round-bottom flask
MilliporeSigmaSynonyms: bottom flask; flask round; round flask Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC
-
Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.
-
ProCulture® Magnetically Driven Cap Assembly Only
SP Wilmad-LabGlass70, 100 and 120 mm caps are manufactured from glass filled PBT 70, 100 and 120 mm caps supplied with red rubber liner and Ultem impeller retaining nut Shur-Lok® 140 mm cap design has an unique compression O-ring design to insure tight internal seal of the flask and is supplied with Ultem…
-
Non-baffled flasks are ideal for growing, mixing and storing both aerobic and anaerobic cultures. Graduated to approximate volumes. Delong style neck is made to fit stainless steel or plastic closures, while reducing the amount of splashing that would reach the closure.
-
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
-
Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads…
-
ProCulture® Fernbach Shaker Flasks with Beaded Rim
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio Beaded rim ensures a greater resistance to chipping Available without baffles or with three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic…
-
Media Storage & Dispensing Flask, Graduated, 250mL
Bellco GlassMedia Storage & Dispensing Flask with bottom hose connection is graduated for approximate volumes & the heavy duty break resistant neck provides an excellent fit for rubber stoppers. All flasks are manufactured from Type 1 Class A Borosilicate
-
Manufactured from type 1 class A borosilicate glass and designed for culturing organisms requiring a large surface area-to-volume ratio. Flask features a 38mm DeLong style neck and can be used with a 38mm SST closure 2005-00038 (sold separately). Dimen
-
G-Rex®6 Well Plate
Wilson Wolf ManufacturingIndividual well specifications: 2cm² gas permeable membrane with 8mL media capacity. Expand 1 million cells into between 40 to 80 million cells in about 12 days with only two exchanges of medium. [GAMMA IRRADIATED. For non-clinical, non-therapeutic, research use only. No certificate provided.]
-
Manufactured from type 1 class A borosilicage glass with cleanout port and depressed sidearm. Supplied with black phenolic rubber lined 38-415 center cap and 18-415 sidearm cap.
-
Shake Flasks are the basic tool for growth studies of aerobic microbial cultures and have rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Designed for use with Orbital Shakers.
-
Triple-Packed Cellstar® Cell Culture Flasks
Greiner Bio-OneTriple packed products are used where sterile transfer of products is essential. With single packaging, contamination adhering to the outside of the bag can be carried into clean room areas. Therefore all single packed materials must be wiped clean with 70 % alcohol or other disinfectant. Triple…
-
Manufactured from type 1 class A borosilicate glass with rigidly controlled baffle angles and depths to promote optimal oxygen transfer while reducing vortex formation. Flask has break resistant lip to resist chipping and is designed for use with Orbit