Wipers, 70% IPA - 30% DI Water, Supplies
-
TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…
-
Nonwoven, meltblown polypropylene presaturated wipes Solvent: 70% isopropanol/30% deionized water Very low levels of sodium and other ions Resealable pouch preserves cleanliness and…
-
TekniMax ™ EX Knitted Microfiber Heavy-weight and durable, TekniMax™ EX utilizes a proprietary weaving pattern to create pillowed loops of sweeping power to efficiently wipe away micro-contamination from even the roughest surfaces. APPLICATIONS Best choice for…
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
Pre-Saturated Cleanroom Wipes
High Tech ConversionsFree-Sat Presaturated wipers are lint free, have four clean-cut edges and are packaged conveniently in flip-open tubs. The FS-NTP-911 comes in a peel-reseal bag. Range of substrate include: Polyester, poly-cellulose, polypropylene and cotton Saturation ranges from 50% to 99% IPA and also…
-
SATWIPES® Sigma™ Wipes
ContecNonwoven hydroentangled polyester/cellulose blended wipes Dispensed from center-pull roll in a reusable canister Presaturated wipe refills are available Strong and durable Low levels of particles and extractable contaminants Each package is individually lot numbered …
-
These PROSAT ® Sterile ™ wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT ® Sterile ™…
-
PROSAT Quiltec® I Wipes
ContecPROSAT®, Quiltec® I wipes, presaturated with 70% IPA/30% DI Water, 12" x 12" (30 x 30cm), sterile Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for…
-
PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 µm filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in a reclosable slider bag, PolySat is convenient for cleaning sensitive surfaces in controlled environments.
-
SATWIPES® Delta™ Wipes
Contec100% polyester nonwoven fabric Saturated with various blends of IPA and DI Water Custom solvent and disinfectant capabilities; contact your Contec sales representative for details Dispensed from center-pull rolls in a re-useable canister Presaturated wipe refills available Strong and…
-
Tekniclean microfiber wipes are constructed with mixed weave yarn, as fine as 0.1 decitex, knitted extremely tight to ensure durability. The structure of the yarn (30% Nylon / 70% Polyester) provides hydrophilic properties of nylon, loipophilic polyester properties, and the capillary effect of the…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
Contec's PROSAT® Sterile™ Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT®…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…
-
Contec’s Slide ‘n Seal Bag is a resealable bag that allows easy dispensing of PROSAT® Polywipe-C presaturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed. Currently,…
-
Cobalt Blue Sterile Pre-Saturated Polyester Wipes, ISO Class 3-4
High Tech ConversionsValidated Sterile – Gamma Irradiated Sealed-Edges ISO Class 3 & 4 (1-10) Cleanroom Wipe Cobalt Blue Pre-saturated 9 x 9 Validated Sterile Cleanroom Wipes – Polyester, saturated with 70% IPA / 30% DI Water. These premium grade class 3 and above cleanroom wipes contain four…
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
PHARMA-SAT PLUS™ 70% IPA Sterile Polyester/Cellulose Wipers
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers that are sterile. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
The Teknipure polyester/cellulose pre-saturated wiper re-fill bag is a critical item to have in chemical laboratories to enhance the performance of various experiments and analysis.
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
MiraSAT™ 70/30 Wipers
Foamtec InternationalMiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…
-
TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…
-
PHARMA-SAT PLUS™ 9 x 11" 70% IPA Poly/Cell, Low Endotoxin, Sterile Wiper, 50…
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, sterile, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products. Pharma-Sat…
-
PROSAT® Sterile™ Polynit Heatseal Vial Wipes are made from 100% knitted polyester presaturated with a blend of 70% IPA and purified water. The polyester wipe generates a low level of particles and fibers so is ideal for use in product contact areas, reducing the risk of product…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
TekniZorb ™ LX Polycellulose Versatile, absorbent, and low shedding, TekniZorb ™ LX offers the performance needed to restore your controlled environment to its required cleanliness. APPLICATIONS Benchtop liner Product storage solution Spill management Plenum…