Nonwoven, meltblown polypropylene presaturated wipes        Solvent: 70% isopropanol/30% deionized water        Very low levels of sodium and other ions        Resealable pouch preserves cleanliness and…

These PROSAT ® Sterile ™ wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT ® Sterile ™…

Contec's PROSAT® Sterile™ Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT®…

TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…

Pharma-Sat Plus™ wipers are low endotoxin, sterile, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products. Pharma-Sat…

Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…

Pharma-Sat Plus™ wipers are low endotoxin, non-sterile, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.

70% IPA / 30% DI water Polypropylene 9″ x 11″ ISO Cleanroom Class 5-8 Compatible Our FREE-SAT® FS-NTP-911 9″ x 11″ polypropylene cleanroom wipes are presaturated with 70% isopropyl alcohol / 30% DI water. They are made of 100% meltdown polypropylene. …

SatPax® 550 are pre-wetted meltblown polypropylene wipers that are available in resealable pouches. The wiper is manufactured utilizing 70% semiconductor grade IPA (isopropyl alcohol) and 30% RO/DI H2O filtered to 0.2 µm.  Soft, 100% meltblown polypropylene Lot number on each…

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT Theta wipes offer a soft and durable wipe…

TekniZorbTM LXS Meltblown Polypropylene TekniZorbTM LXS o ers a very low-shedding wiping solution to deposit IPA while e ectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for e cient surface cleaning and sanitization between and during…

TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…

PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 ë_m filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in resealable flexpacks or flip-top tubs, PolySat is convenient for cleaning sensitive surfaces in controlled environments. …

Extremely soft polypropylene and pure IPA bring wet wiping to delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping. Recommended for ISO 5-8 critical environments. Features …

TechniSat incorporates a pre-wetted fabric blend of nonwoven hydroentangled 55% cellulose and 45% polyester. This fabric combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic fiber. It offers low particle counts, low extractable levels and…

These PROSAT® Sterile™ Theta™ Wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT®…

M1 polypropylene wipes are made from pure, lint free & chemically inert 100% meltblown polypropylene with Isopropyl Alcohol & WFI (Water for Injection) in precise saturation level provide excellent wipe down/pick up with economy in mind. This material & chemistry has excellent…

FREE-SAT NTP-911 presaturated wipes are made of 100% polypropylene. They are extremely clean with very high absorbency. These 9 x 11” wipes are pre-saturated with 70% Isopropyl Alcohol and 30% DI water and are packaged in convenient re-sealable bags. Validated to SAL (Sterility…

FREE-SAT NTP-911 presaturated wipes are made of 100% polypropylene. They are extremely clean with very high absorbency. These 9 x 11” wipes are pre-saturated with 70% Isopropyl Alcohol and 30% DI water and are packaged in convenient re-sealable bags. Validated to SAL (Sterility…

Contec’s PROSAT® Sterile™ Polypropylene Low Endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. …

TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…