Weights
-
Lead Rings
Heathrow ScientificUse rings to stabilize glassware and plasticware on shakers or immersed in water baths. Vinyl-coated lead rings will not mark or scratch bench tops or labware.
-
Closed Lead Rings
SP Bel-ArtProtect and stabilize expensive glassware with these Vikem® vinyl coated lead rings. Stabilize glassware immersed in water baths; reduces floating, breakage and chemical spills Bright red Vikem® vinyl coating Chemical-resistant Will not scratch flasks Available in five…
-
These lead weights can be coiled into a helix, spiral, cone or any irregular shape to stabilize vessels in a water bath. Flexible; versatile Coil around flasks, thread through handles or loop around bottle necks Coated with chemical resistant red Vikem® vinyl to protect glassware …
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Individual Calibration Weights
SartoriusStainless steel polished finish Designed to meet ASTM E617-13 specifications ASTM Class 0 weight sets and individual weights are not individually marked with their weight value or individually serialized per ASTM E617-13 Nominal value marked on weights Serial numbers applied to case…
-
Scienceware® C-Shaped Lead Rings
SP Bel-ArtAdd to fluid handling setups already in place Accommodates wide vessels by pulling on end to expand ring id Vikem ® vinyl coating protects glassware Rings fit neatly around the neck of filtering flasks with side-arm tubing connections. No need to disconnect the tubing and possibly…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Calibration Weight Sets Adjusted to Meet or Exceed ASTM Class 1-4 Tolerances Troemner ASTM Class 1-4 offer high accuracy with tight tolerances and uncertainties of less than 1/4 of the tolerance. Weight surfaces meet or exceed ASTM and have a highly polished finish. Available in high…
-
Weight Hooked Brass
GSC International, Inc.We sell several hooked weights that are different shapes and weights. All styles are designed so that they can be hung in tandem. They are sold individually. Weights include: #4-25007 : Hooked Brass Weight, 50g #4-25008 : Hooked Brass Weight, 100g #4-25010-CI : Hooked Cast-iron…
-
Scienceware® C-Shaped Lead Rings
SP Bel-ArtAdd to fluid handling setups already in place Accommodates wide vessels by pulling on end to expand ring id Vikem ® vinyl coating protects glassware Rings fit neatly around the neck of filtering flasks with side-arm tubing connections. No need to disconnect the tubing …
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Flat with one end turned up for easy handling Supplied in high quality polycarbonate case with…
-
ASTM Class 1-4 Individual Weights
Mettler ToledoLow magnetic permeability and high corrosion resistance ensure reliable values. All weights are made of stainless steel, even for mg weights no aluminum is used. Weights are manufactured under METTLER TOLEDO’s stringent ISO9001 quality management system. Unique Design METTLER TOLEDO…
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Cylindrical Balance Weights
TroemnerIdeal for electronic balances, larger scales and economical everyday use These two-piece, cylindrical weights are more economical than analytical weights and made to the same exacting tolerances. They are ideal for routine calibrations. They are available in a variety of specific sizes, as…
-
Storage Case For 10 kg Weight
TroemnerWeight Case for one weight, with grip handles. Holds one 10kg weight Polypropylene constuction Reinforced metal edges and corners Padded carrying handles
-
Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. NVLAP Accredited Certificate Troemner's NVLAP Accredited Certificate provides compliance in…
-
OIML Precision Class E2 Weight Sets
TroemnerClass E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Primarily used to test commercial weighing devices by state and local weights and measures officials, device installers and service technicians. Class F weights may be used to test most accuracy Class III scales, all scales of Class IIIL or IIII, and scales not marked with a class designation. …
-
Class 4 For calibration of semi-analytical balances and for student use. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent regulatory requirements. The Traceable Weight…
-
ASTM Weights
Mettler ToledoHigh Gloss Polish: Experience, combined with special skill acquired through years of weight polishing guarantee the consistent high quality for all customer demands. Weight Calibration Performed by Robots: Substantial investments in cutting-edge robot technology combined with decades of…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Weight Set Hooked
GSC International, Inc.There are nine hooked weights in this set. The weights are as follows: one 1000g cast-iron hooked weight, one 500g cast-iron hooked weight, two 200g brass hooked weights, one 100g brass hooked weight, one 50g brass hooked weight, two 20g brass hooked weights, and one 10g brass hooked weight. Comes…
-
Weight Set Slotted & Hanger, 12 pcs
GSC International, Inc.This slotted weight set includes the following: Nine 20g brass slotted weights One 10g brass slotted weight Two 5g brass slotted weights One 50g hanger PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of…
-
To get all the accuracy your electronic balance and/or scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. Weights are available in a…
-
Analytical Precision Class 1 Weights
TroemnerClass 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.
-
Thomas Scientific Calibrated Sale Weights
labForce® (powered by Thomas Scientific)Thomas Scientific Calibration Weights are solid construction and made with non-magnetic stainless steel. OIML E2 can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.…
-
Weight Accessories
Mettler ToledoChoose from a wide range of weight accessories to optimize weighing processes and improve ergonomics. Mettler Toledo is offering all the accessories you need to properly handle and protect your Weights and Weight Sets. Mettler products are intended for sale/shipment within the…
-
Analytical Precision Class 2 Weights
TroemnerClass 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g.
-
Stainless Steel Basic Hooked Weight Set
United Scientific SuppliesSet of ten hooked weights are made of high quality stainless steel. Includes one of 200g, two of 100g, three of 50g, and four of 20g weights.
-
Weight Set Slotted with Hanger, 10 pcs
GSC International, Inc.This slotted weight set includes the following: Ten 10g plastic slotted weights One 10g hanger PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State of California to cause cancer, birth defects, or other…
