Cannon Fenske Routine, CFRU (Uncalibrated) & CFRC (Calibrated) Viscometers For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants Meets ASTM D 445 and ISO 3104 requirements Specifications conform to ASTM D 446 and…

Contains an oxidation inhibitor which reduces tendency to darken at higher temperatures For use below 135°C (275°F) For higher temperature requirements, see Thomas number 6428R25.

Made of polished stainless steel Looped handle and finger ring Calibrated with Cannon viscosity standards traceable to NIST; Cannon standards are produced in accordance with ISO 90002 Each cup is furnished with the mathematical formula for calculating the viscosity in centistokes…

Microprocessor controlled temperature regulation from 10 to 150°C Conforms to ASTM D 445 Built-in platinum resistance thermometer On-screen temperature monitoring RS 232 and RS 485 communication ports A keypad permits temperature selection to two decimal…

EZ=Equivalent Zahn; 3% Guaranteed tolerance; complies with and exceeds ASTM D 4212 All stainless steel cup and handle Oil used to standardize EZ Cups is produced in accordance with ISO 9002 The EZ cup formula for each cup of the series matches the applicable ASTM formula in D…

Programs are supplied on a 3.5” disk. The programs are designed to be user-friendly (they are accessed through a convenient menu system) and are provided with a detailed operator’s manual. The calculations performed include the following: Blending of oils- the W.A. Wright…

Ideal for industrial and laboratory applications that require rough vacuum measurement. *Rugged design for harsh applications 316 stainless steel only wetted material in sensor. *Isolated and hermetically-sealed sensor to prevent contamination from system *Allows for recording and data capture…

Quick and reliable automation Direct kinematic viscosity, no need to correlate data Modified cross-arm style tube, works with both transparent and opaque oils Reliable, only 2 moving parts Easy-to-use graphical touch screen Small sample volume: <0.5 mL Rapid automated analysis: <3…

Removes all traces of oil Air pressure drives solvent No electrical contact needed Unit is designed to wash the inside of glass kinematic viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for…

The bubble viscometers can be ordered individually to create a custom set. Economically priced Compliant with ASTM methods D1131, D1545, D1725

Wide temperature range 20°C to 150°C Easy temperature setting Insulated for precise solid-state temperature control Multiple safety features Ideal for temperature control of other instruments which must be viewed while immersed in a constant temperature bath. The top…

The consistometer is a bench top device used for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards. While using little bench space, it provides a simple, accurate method of conducting a variety of flow associated tests. It can be used in…

For both laboratory and field use Aluminum cup and brass orifice Calibrated cups are calibrated to within 2% accuracy Ideal for measuring low viscosity liquids Results are expressed as time in seconds for the liquid to flow through the orifice until the first break in the…

Designed specifically for measuring viscosity at low temperatures using glass capillary viscometers Conforms to ASTM D 445 for low temperature viscometry Peltier cell for thermoelectric cooling Fan-cooled, high-density heat sinks Holds two glass capillary viscometers A…

Reverse-flow viscometer for opaque liquids having kinematic viscosities of up to 300,000cSt. Requires a sample of 12-25mL. Use with K23330 rectangular metal holders or K23387 round plastic holders. Length: 275mm

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume: 7 mL in sizes A to C; 12 mL in sizes D to F ; 23 mL in sizes G and H. Requires…

Regardless of a simple or demanding viscosity measurement - IKA ROTAVISC HELI Complete determines the viscosity of medium viscous liquids in all areas of application ranging from the laboratory to quality control. Easy to operate The generous 4.3″ TFT display allows for an…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”).…

Large capacity 5L constant temperature water bath with internal diameter of f240 mm. Designed with flat-shaped bath with no heater or sensor inside for ease in cleaning. Temperature range: ambient +10~90°C. 100-115V. Large capacity 5L constant temperature water bath with internal diameter…

The Quick Connector enables the spindles to be connected directly to the ROTAVISC measuring System. Consisting of: 1x coupling to the ROTAVISC 6x adapter for the spindles

ViscoQC 100 is designed to bring simplicity to your daily operation for single-point viscosity determination. Unrivaled user experience is ensured by its automatic spindle detection with magnetic coupling. Save your time when searching a speed to measure an unknown sample, as ViscoQC 100…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Precision: ±0.2% Specifications conform to ASTM D 446 and ISO 3105. Minimum sample volume: 2 mL. Requires liquid bath depth of 230 mm (9"). Includes certificate of…

Calibrated viscometers For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt…

The new ROTAVISC series determines the viscosity of liquids in all areas of application ranging from the laboratory to quality control. The four devices measure in different viscosity ranges. Regardless of a simple or demanding viscosity measurement - the ROTAVISC delivers rapid and accurate…

The IKA viscometer spindle is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage. It is easy to handle and convenient to use.

Calibrated viscometers For measuring kinematic viscosity of opaque Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.3%. Minimum sample volume: 7 mL. Requires liquid bath depth of 280 mm (11"). Includes…

Automatic timing option for simplified, accurate measurement of efflux times Microprocessor controls temperature between ambient and 240°C (464°F) Four-tube capacity Dual digital displays show setpoint and actual temperature °C/°F selectable Conforms to ASTM…

For glass capillary viscometers and other instruments requiring precise low temperature control All-digital, LCD displayed, microprocessor-controlled temperature regulation; Cooled thermoelectrically (solid state heat pump) Temperature range: -30°C to +30°C °C/°F…

The flow cups offer a more precise vicosity measurement compared to a dip cup. A stand is used to hold the flow cup level and allows the operator to control the start measurment time. Jacketed stands or waterbath stands are available to control the sample temperature prior to and during the…

Anton Paar’s air-counter-cooled Peltier temperature device PTD 80 for the rotational viscometers ViscoQC 100/300 not only saves space in the laboratory but also provides fast and highly accurate sample temperature control from +15 °C to +80 °C. Anton Paar products are intended for…

The T-spindle set is particularly suitable for the measurement of non-flowing samples, such as creams, pastes or gelatin. The set is the right accessory for electrica HELISTAND.

Uncalibrated and Calibrated Viscometers Suspended level viscometer for measurement of kinematic viscosity of transparent Newtonian liquids Also used for evaluating jet fuels and hydraulic fluids Meets ASTM D 445 and D 446, as well as ISO 3104 and 3105 requirements Suitable for use at…